Just a query on LOCL or LOCR output devices
Hi Gurus,
Good day!
How I can address this issue if the russian texts are not properly printed using these output devices LOCL or LOCR.
Appreciate your help.
Thanks!
Cheers,
Virgilio
oh well kind of yes
actually every SAP-system printer can have different access methods or printer types. See transaction SPAD to have a look at you printer settings.
if you have a SAP-system printer which is able to print your russian symbols, then have a look which printertype is used.
Then talk to you basis if they can make you a new system printer lets say LOC1 with your desired printer type and whoops there you go.
hope its any helpful
Similar Messages
-
Output device LOCL is not defined
Hi,
I am getting an error message while executing a report containing smartform
'Output device LOCL is not defined'.
The coding is as follows:
l_s_ssfctrlop-no_dialog = 'X'.
l_s_ssfctrlop-getotf = 'X'.
l_s_output_options-tddest = 'LOCL'.
l_s_output_options-tdnoprint = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
Please let me know what is the issue here.
Thanks,
Soumya.Hi,
Might be the local printer is not defined. Try using LP01.
To verify for LOCL...
Goto SPAD tcodeFull Administrations>Mention the LOCL in the Output Device I/0 Field.
Regards,
Aditya -
Output Device LOCL is not type PDF1
Hi
I can see the payment specifications waiting to be sent in SOST. But I am getting the error message (below) when I try to print them off. I cannot print. I need to be able to print out the payment specifications by batch. these payment specifications are in .pdf format
Output device Output Device LOCL is not type PDF1
Message no. TD429
Diagnosis
You have selected an output device that does not have device type specified.
System Response
The system will not accept this output device.
Procedure
Please enter an output device of the proper device type. The possible values pushbutton allows you to display a list of devices you can enter here.
Please help me,
Al MamunHi,
check this link:
http://help.sap.com/saphelp_nw04/helpdata/EN/38/5bc3f2e4bd11d18e2b0000e83dd9fc/content.htm
and configure LOCL printer in tcode SPAD correctly. -
Cannot find PDL type for output device LOCL in J1INCRT
Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release 701
Please suggest how to solve
Regards,
KumarHello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
Logical Form Name = HR_IN_EPF12A_99M
Form Variant = (Leave this field blank)
End Date = 31.12.9999
Start Date = 01.01.1990
Form Type = SAP Script (SSC)
Def. Type = (This field should be checke
PDF Form Name = HR_IN_EPF12A_99M
SAP Script Form Name = HR_IN_EPF12A_99M
Smart Form Name = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana -
hi friends,
Here is my query on a Alv Report output display
I have two internal tables i_vbak and i_vbap
i_vbak contains the fields and value as
vbeln kunnr auart audat bstnk vkorg
1000066 1000071 ze0r 20070918 Itest1 PA11
1000067 1000072 ze0r 20070919 SLA-Test1 PA11
i_vbap contains the field and value as
VBELN MATNR ARKTX
1000066 SAMPLE MATERIAL1 Sample Material for reports
1000066 SAMPLE MATERIAL Sample Material for reports
1000066 TEST MATERIAL Test Material for reports
1000067 SAMPLE MATERIAL Sample Material for reports
1000067 TEST MATERIAL Test Material for reports
1000067 SAMPLE MATERIAL1 Sample Material for reports
I have a another internal table called inv_final which contain all these fields and respective values to display in the alv output.Here i am giving only two field how it whould come in alv output.
Sold to Patry(kunnr) Sales Doc No(vbap-vbeln) Material Name(matnr)
1000071 1000066 Sample Material1
1000071 1000066 Sample Material
1000071 1000066 Test Material
1000072 1000067 Sample Material
1000072 1000067 Test Material
1000072 1000067 Sample Material1
If anybody have done similay kind of repore than help me with the code,or else if anybody having any idea to solve this out than help me.I have only prob with the logic bofore the final table display in the alv output.
Helpful answer will be rewardad generously.
Thanks a lot
mrutyun^Hi
Put all the fields in to an internal table and disply only your required fields.
Kuntal -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi,
Please provide me sql query to get df -h output. I don't have server (Solaris) access to get df -h output.
I want to check the space availability on the mount point to increase space at the tablespace level.
Thank you..sb92075 wrote:
SQL> host df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 220G 66G 144G 32% /
none 1.9G 308K 1.9G 1% /dev
none 1.9G 959M 896M 52% /dev/shm
none 1.9G 96K 1.9G 1% /var/run
none 1.9G 0 1.9G 0% /var/lock
none 1.9G 0 1.9G 0% /lib/init/rw
The "host" command executes on the client machine running sqlplus, not the server that the OP says he doesn't have access to. -
Output device locl is locked by R/3
Hi Gurus,
can anybody tell me how to unlock the printer in SPAD?
Thanks in advance.
Thanks & Regards,
Lata BorannavarHi Lata,
Best solution will be resetting the output device by the basis guys.
Normally all the output devices are stored in table-SSFPP and in the field - TDDEST.
So go to Sm12 and see if table is locked then remove lock there itself.
If you are not having authorization to SM12 write program using function ENQUEUE_E_TABLE
call function 'ENQUEUE_E_TABLE'
exporting
tabname = 'SSFPP'
varkey = varkey
exceptions
foreign_lock = 1
system_failure = 2
others = 3
Cheers!!
VEnk@ -
Output device tddest in smartforms
Hi,
I am using smartforms to convert the otf data to pdf. The coding is as follows:
* Set the Parameters of smartform
l_s_ssfctrlop-no_dialog = 'X'.
l_s_ssfctrlop-getotf = 'X'.
l_s_output_options-tdnoprint = 'X'.
* call FM to get the name of the FM of smart for smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = g_form_name
IMPORTING
fm_name = l_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION l_fm_name
EXPORTING
control_parameters = l_s_ssfctrlop
output_options = l_s_output_options
user_settings = ' '
IMPORTING
job_output_info = l_s_job_output_info
TABLES
g_t_datatab = g_t_datatab
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
REFRESH g_t_pdf_tab.
*Convert to OTF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = l_byte_count
TABLES
otf = l_s_job_output_info-otfdata[]
lines = g_t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I am not passing tddest (output device) to 'l_s_output_options' as I don't want to print it.
I just want to convert the otf data obtained to pdf and use it for further processing.
Will there be any problem if I don't assign any ouput device.
Please note that in the system ouput device 'LOCL' is not maintained.
Thanks,
Soumya.Hi Valerie,
I am using below code to get the printer name by default , even i want to skip that screen that asks for the printer name. But am unable to get this requirement. I have tried with various combinations but its not working. Please suggest.
control-preview = 'X'.
control-no_dialog = SPACE.
output_options-tddest = 'LP01'.
CALL FUNCTION lv_fmname
EXPORTING
output_options = output_options
contol = control
p_matnr = p_matnr
user_settings = 'X'
TABLES
gt_stpo = gt_stpo
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_cancelled = 4
OTHERS = 5.
Thanks & Regards
Jatin -
Output device option in smartform
Hi,
I am getting the below error in a program which calls a smartform.
'Output device LOCL is not defined'. As the output device LOCL is not maintained in the system through tcode SPAD, ia m getting this.
My doubt is if i remove the option of giving output device, will it work.
The coding is as follows:
* Set the Parameters of smartform
l_s_ssfctrlop-no_dialog = 'X'.
l_s_ssfctrlop-getotf = 'X'.
l_s_output_options-tddest = 'LOCL'. --------> if I comment this line, will it work without any error as I don't want to print it.
l_s_output_options-tdnoprint = 'X'.
* call FM to get the name of the FM of smart for smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = g_form_name
IMPORTING
fm_name = l_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION l_fm_name
EXPORTING
control_parameters = l_s_ssfctrlop
output_options = l_s_output_options
user_settings = ' '
IMPORTING
job_output_info = l_s_job_output_info
TABLES
g_t_datatab = g_t_datatab
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks & Regards,
SoumyaHi,
One more doubt if I give the parameter
l_s_output_options-tdnoprint = 'X'. will it prevent the printing of the form generated or is it just to disable the print button in the pop up.
Thanks & Regards,
Soumya. -
DV6 - 3203TU, No Audio Output Device is installed
Product: DV6 - 3203TU
Product ID: LG225PA#ABG
OS: Windows 7 64-Bit
Hi folks!
The sound on my laptop stopped working, there were no updates of any sort prior to the occurrence, but now the volume control has a red x in the icon and reads " No Audio Output Device is installed". Troubleshooting reveals nothing (it can't see a device to troubleshoot).
I tried installing the sound drivers for the DV6 - 3203TU but the installer reports that the 'hardware detected is not compatible with this IDT audio package'.
In order to make sure that the DV6 - 3203TU was the right device (it's on the sticker beneath the battery) I tried to use HP's autodetect software. It did not find an HP PC, just my HP printer.
I'm not sure what to try next.
Any help would be very appreciated, thanks in advance!Hi tristh1,
Thank you for your query, I will do my utmost to assist you.
I grasp that you have lost the sound. You have tried installing sound drivers, but you got a message that"the hardware detected is not compatible with this IDT audio package". You are unsure of the model number and were unable to confirm it. Here is a link to How Do I Find My Model Number or Product Number? so you can verify the model.
Here is link to No Sound from the Speakers (Windows 7),to aid in resolving this issue.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Help, no sound, no sound output devices
Hi all,
I tried this over in the Tiger section with little help. About a week ago I told my grand-daughter she could plug her iPod headphones into the headphone jack on the the front of the G4. Now, I have no sound at all except for through the headphones and only the headphones show up as an output device. I have tried trashing the "com.apple.soundpref.plist" and rebooting thinking that the OS would creat a new one during startup but that didnt work (there was TWO of them in there). I also tried trashing "com.apple.audio.AudioMIDISetup.plist" but that didnt help either. I put them both back where I found them later. Those files both belong in library-preferences right? I tried zapping the Pram but having no sound I didnt get a "bong" I just listened for it to rev-up twice, still no change. I also tried the PMU reset switch. I can change the volume level with no effect except for the headphones and the sound is not muted.
System Profiler does not recognize apple pro speakers that are plugged in, I do have sound sticks to try but they are boxed up in the garage.
So I am wondering if the phone jack got messed up by the iPod plug, a hardware issue, or does this seem to be software related problem? I did an archive & install today with still no sound so now I am thinking that the plug is messed up inside and still thinks the headphones are plugged in.
Does anyone out there have any advice to offer?
I am going to do surgery next to explore the headphone jack and the tiny speaker above it.Slimtech,
I don't have a solution for this, but maybe some comments might help a bit...
com.apple.soundpref.plist and com.apple.audio.DeviceSettings.plist should be at /Library/Preferences.
com.apple.audio.AudioMIDISetup.plist should be at ~/Library/Preferences.
The "Audio (Built In)" section under System Profiler for my QS G4 shows no attached devices, but merely shows information about the sound card itself, with three generic outputs listed as "Internal Speaker, External Speaker, and Headphones".
Normally, you should get a startup Chime from your internal speaker even with headphones plugged in, unless perhaps the sound setting is on Mute at shutdown, which sometimes will affect/mute the startup chime at the next startup.
I would think that if the Mac thought that the headphone were still plugged in after removal, your Sound Preference Pane Output window would indicate this. If the Headphones appear in the Output window when plugged in, then disappear when removed (refresh the window by clicking another Tab then going back to the Output Tab), the System obviously recognizes their removal. Apparently, it doesn't recognize the internal speaker that it's supposed to switch back to though, for reasons unknown to me.
You might try vigorously and repeatedly plugging/unplugging the headphone plug into the headphone jack, which helped clean up the jack and restore the sound on my G3 some time back.
Sorry I couldn't be of more help.
Gary -
Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back. -
Test report to check output devices?
Hi,
Is there a test report that will print a page so I can check if the output device is working OK and printing like it should? I have create a output device with a device type but now I would like to check if it's configured OK. Is there something I can print to check that? So resolution, margins etc.
Thanks!Hi,
Just go to SM50 and press the printing icon there. Is not a large report but you can see the resolution and margins there.
Hope this helps you. -
No longer able to mute or change playback output device for capture.
I have no preview button to turn off in my capture window and have instead gone into the FCP preferences to change the playback output device to something other then my Fireface800 IO device, such as the built in output so that what's being captured only comes out the little speaker in the tower.
Thus I am free to work on other stuff. (8 core mac pro, gobs of ram, multitasking has never been a problem, even while capturing HD.)
But as of the latest update (I keep all my apps up to date), capture plays through the System default device no mater what the FCP setting. So with out a mute button for the capture, I'm screwed.
I'm screwed because I have to Mix down an EP while I capture 26 hours of conference footage at the same time. Obviously, I can't mix properly with that chatter playing loudly over it.
Apple said I have to reinstall because there's no preview button and there should be but I am curious if there's any other way (because it's a huge pain in the *** and tends to screw up other things) and I would like to know if the way I usually do it is broken for other people, so I know if I can upgrade to the latest version again because it was some goofball problem with the framework that reinstalling fixed or if not because that's a bug in 7.0.3
1. Choose one audio output (say, Built in Line Output or your default sound card) everywhere that matters in the Final Cut preferences for Audio output, including Audio Playback Output which is what I've been using to switch this for, gosh, years probably just out of habit.
2. Log and Capture, capture some footage from tape. (I happen to be working with a basic HDV firewire profile.) What device do you hear output from?
3. Stop capturing... and, if you wish, for good measure, close the capture window.
4. Go back to FCP preferences, now choose a DIFFERENT audio output, say, Built In Speaker Output.
5. Try to capture some footage. Is the sound coming out of the built in speaker now?
IS THERE ANY OTHER WAY TO QUICKLY SILENCE THE AUDIO FROM FCP DURING CAPTURE?
Thank you.excuse me, not linksystem, its a verizon FIOS wireless router & modem as part of the package. i was thinking my old setup.
new system...cant edit my posts....?
Maybe you are looking for
-
Error when running java application on HP-UX
I am experiencing some problems when running my applications on HP-UX. I have downkloaded and instaled the SDK version . I can compile normally my programs, but when running I have the following error: Exception in thread "main" java.lang.NoClassDefF
-
How to create a link between 2 cells in different spreadsheets?
when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?
-
How to fax using Oracle and OAS40
Hi I am using Oracle 8i and OAS 40. I wanted to fax documents online using OAS 40. By any chance any body knows how to do it, please share with me regards manoj null
-
I lost use of my Skype on my MacBook since mid-July and the support team they have there has been useless. I can get it on my iPhone just fine, but Skype is more effecient on my laptop. I've talked with a lot of people on the site, but they say they
-
Multilangu​age @ Labview 7 Express
Hello .:-) I'm beginner in LabView. Two weeks ago I received a system with LabView application as a HMI system for control. The problem I have is how to implement a switchable second language for all texts in all VI's. Please help ! Thanx in advance