Just a quickie

Hello all.
Could someone please tell me what the below code does:
int i = Integer.valueOf(in.readLine()).intValue();
Thankyou.

please learn how to post a msg
the forum requests that you DO NOT use inappropriate subject headings...
bcz it messes up the database for ALL of us who use the "search"
mechanism.
This is twice now you've posted "quickie" in the subject line...
please stop it.
Thx.

Similar Messages

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

The pdfs that are produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter. Is their a suitable free compression programme,

The pdfs that I produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter. Is their a suitable free compression programme,

PDF Shrink for Mac
Compress PDF – Reduce your PDF Online
PdfCompress for Mac

Just a quick question regards my mobo..

I might possibly bricked my motherboard which I already ask a while back,, just a quick question,,, Now I did hooked up the powersupply to the motherboard alone,,, no other components,,, just the PSU and motherboard,,, then I use a paperclip to put static force on the motherboard's power button ( where powercables on the case should suppose to be in ),,, now the motherboard just keeps on blinking as my problem b4,, so its really the motherboard right??? I just want to confirm that the motherboard is the problem and no other components... thnks

It is finally enough n2th2n. Don't open tons of threads for the same issue. For your board issue use your original thread: forum-en.msi.com/index.php?topic=184002
Consider this a final warning.

Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8

Hi there, I just bought an iMac 2011. Just a quick question. Are those keyboard and mouse batteries that comes with the package are rechargeable?

Hi there, I just bought an iMac 2011. Just a quick question. Are those keyboard and mouse batteries that comes with the package are rechargeable? Thanks!

Mine was bought last year and they were not; it they don't say "rechargeable". they're not. I started to use rechargeable as soon as the original batteries died.

I just updated the software on my 3GS and now, my apps just open quickly then close....what should i do?

I just updated my software, and now my apps won't work. They just open the close quickly....I've done a force quit, but it stills doesn't work! What can I do?

Have you tried a reset?
iPhone User Guide (For iOS 4.2 and 4.3 Software)

When i try to preview a song using my iphone and computer, it just loads quickly and there is no sound.

Ive been trying to preview songs on itunes, using my iphone and computer. Typically when previewing a song, it loads and its a blue color and it will play. Now when i try to preview, it stays black, and loads super fast and theres no sound. And I seem to be getting different prices on albums every time i click on one. Its just being really weird.
any tips or tricks?? ive tried resetting my phone and everything else. nothing is working.and i can play all the music on my phone with no problem. i just cant preview anything in itunes.

The number of devices authorized on an account and the number that an iPhone can sync to are two different things. You can now authorize up to 5 computers or 10 devices to play your content, but still an iPhone, iPad or iPod Touch can only be tied to one computer at a time. You can copy content from other computers to the computer used for syncing, and get it on the iPhone that way.
Connect the phone to that computer, whichever you want to be the "master" of the iPhone. Click on its name in iTunes. On the right there is a Summary screen. Scroll down it and you will see several checkboxes. One of them is "Manually manage music and videos". If this is checked you must drag content from iTunes to the iPhone. If you have a large library, however, this can be cumbersome.
The alternative is to leave this box unchecked, and instead click on the "Music" tab when the phone is connected. You can then just check the content you want on the phone, by artist, genre, title, playlist, etc. After checking you click the "Update" or "Sync" button and everything you have checked syncs automatically.

Cirrus Logic sound card not working - Just a quick question (iMac 27-inch)

Hi, so as many have experienced, my sound card is not registering on my new iMac, on the Windows Vista side. I get sound out of the Mac side, just nothing from Windows.
I was wondering, would a USB sound card or sound pod solve the problem? I am not amazing with computers... But would buying one of those be a possibility?
I was looking at something like this...
http://www.emicrophones.com/p-1230-andrea-pure-audio-usb-sa-full-duplex-usb-soun d-pod.aspx
If anyone who knows what they're talking about could give me some input on this, it would be greatly appreciated. I do a lot of video editing on the Windows side, so having no sound would be an extreme burden.

Hi - I had this problem when I installed WIndows Vista (32 bit) on my i5 iMac. I believe I resolved the problems by finding the drivers on the OSX install disk. What I am struggling with is updating the video drivers - but that is another story...
Steve

Just a quick question re my broadband speed.

Hi (again)
The advertised speed (from BT's choose for package page) for my line is 8.5Mb-13Mb, but I only ever have 5meg max (on a good day)?
Just wondered.
Mazz
Solved!
Go to Solution.

DSL Connection
Link Information
Uptime: 0 days, 0:31:02
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 7,520
Data Transferred (Sent/Received) [MB/MB]: 24.97 / 591.14
Output Power (Up/Down) [dBm]: 12.0 / 19.5
Line Attenuation (Up/Down) [dB]: 17.0 / 34.0
SN Margin (Up/Down) [dB]: 21.0 / 6.0
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 121
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
Line Profile: Interleaved

I just installed Quick Time 7 and all-**** broke loose!

I took someone’s advice and I went to the apple website and d-loaded the latest version of QuickTime (Quick Time 7, http://www.apple.com/quicktime/ ) which in doing so, I now can’t play any of my HD MOV format recordings! This is so frustrating. The message I am receiving is that I need the older version of Quick Time to play my specific video, or that the plug-in failed to initialize, which sounds crazy! I already un-installed quick time and installed it again, and still not working…sigh…. What makes it even more frustrating is that when I open quick time 7, I can import/load one of my HD MOV loops and it plays it perfectly, but it will not let me save the file as an avi or other format, because I don’t own quick time pro. I don’t understand this, why won’t this latest version of Quick Time recognize the mov file? My older version worked fine. I can play it in quick time so why won’t this latest version recognize it on my desktop as a compatible quick time file? Why do I have to manually load it in quick time to play it?
In addition, what is the solution for the annoying error message I keep receiving every time I open the new version of Quick Time 7. The error message is “Export Controller Has Stopped Working.” I feel like a knob and after 2 hours of trial and error, I failed!

Double check and make sure you have administrative priviledge in MS Vista. I also had this problem of not being able to use Nero ShowTime or Vision. I believe it to apples way of killing the competition. What I suggest you do (if you don not have pro version) is to remove the QuickTime from the system, but make sure the protectionware (antivirus/malware tools) are disabled temporarily before you do. Then restart the system and open registry editor and search down all inferences to QuickTime in the registry, and delete them. Most are keys but some will be Values (in the right side). Open these values and backspace to remove them.For preferred delete the whole key.
Once you do this you will restore your players or editors to working state. The only thing that will change you will not be able to play QuickTime filetypes.

Just a quick condensation question.

So last night, it was kinda cold outside, and in the house it was very hot, and my MacBook Air was on, and when I woke up I saw condensation on the windows, they were covered in condense, and a pretty big amount of it, and I'm a bit worried that my MacBook was on, because I was playing music and fell asleep. So I'm kinda worried that my MacBook internals might get corrosion or something because of the condensation, the curtains were covering the window tough, so I'm not sure what to say, and the desk is not that far from the window, so I'm not sure what to say, that's why i'm here asking you guys..
Thank you.

The window was a singular barier between the outside and inside, your macbook wasnt in such a case.
However condensation is something to worry about in traveling with a macbook, but your incident has no indications of worry.
Condensation,.....why your MacBook Air needs a warm coat too
While you should never store your notebook in a cold car for any significant time (couple hours or more), in cases where a notebook is being carried thru cold weather in a case, having a padded and zippered (not just a sleeve!) case is very important not just to protect your Macbook from a shock from being bumped or accidentally dropped, but for thermal protection. In coming in from a cold walk or environment, an unprotected and cold notebook is subject to condensation forming not only on the alloy casing but more importantly on internal parts and the logic board which is to be avoided at all costs. Namely when turned on and the fan kicks on and blows warm air around the cold logic board condensation can form and in worst cases either eventually produce a fault or lead to compounded problems where corrosion forms inside your Macbook.
For transporting in the cold, your notebook needs more than a sleeve, rather a padded / insulated carry case to prevent temperature fluctuation from causing condensation.

Just bought Quick Time 7 Pro---nothing is different?

What am I doing wrong? I received the email with my registration code, copied and pasted it into the Registration Code box under the Registration selection, rebooted and nothing has changed. When I search for Quicktime Pro it's not found in my computer, and my QT app in applications just says QuicktimePlayer.app When I get info on Qt, it says version 7.6.6
Anyone know what's up?

Just to add to it.. YOu can go to system preferences under the APple menu and select Quicktime and go to the registration tab. If the resgitration code is already there, your QT Pro is activated. If not you will have to key in the registration key there.
As such QT Pro key is just to unlock all the features of QT which are not enabled in the default version.
Also as per Niel's post, let us know the version of QT. If it's Quicktime X., then there's a different way to get QT 7 installed (which actually takes the Pro key)

Just a quick hello

Hi People,
Just about to start the collaborative aspects of our current flex 4 application, so thought I'd pop along here first and say hi (seeing as I'm very likely to be coming here begging for help real soon) :-)
so, anyone else here using with flex 4? any head's up needed?
anyway just wanted to say hello
cheers
glenn

3 days into my first round with the API and flex 4.
well, so far so good!
Getting everything setup and added into our current project was simple and worked first time as expected. log in of guests, changing/assigning roles, setting groups, and running the session in a sub model, all exactly what we wanted and I swear the first lot of code we did work first attempt. Great stuff. I dont think you could have made it any simpler to get working. SO pleased. in fact the client saw the additions after two days and asked me id I'd been working over the Christmas holidays! (well I said yes, wouldnt you!!)
anyway, flex 4. All is ok apart from as expected the pods all play up. well apart from the file share which isnt having any problems. All the problems with the pods are exactly what was expected and they all work well enough to be able to test that the sessions are working so thats cool.
we're going through writing some custom ones in spark, most of which we'll put up on google code. i'll drop some urls here when its ready (rough and ready most likely)
so, all in all a good experience for us. we're very pleased with what we had out the box.
to be able to take a project that is already over 12 months into development and add a major new set of functionality lilke this, and have the bones of it up and working in about 2 hours is amazing really and is testiment to the API
great work guys.
we're all looking forward to really get stuck into it now.
cheers
glenn

Just purchased quick time... not downloading...

I just got this and it won't download. I put in my product code then nothing...any ideas?
Thanks

Name and number must exactly match the info found in the email confirmation.
Use copy/paste to enter it.

PItch Problem - Just a quickie

Hello Everyone,
I don't know what I have done (maybe 10.4.4 update is the cause) but each instrument patch i select or any MIDI sound, is played a full tone higher than actual note selected - i.e. C1 is heard as D1, though the transport shows it as C1.
Any ideas guys?
Also, occasionaly during playback the message - "Error while trying to synchronize audio and MIDI" appears. "Sample Rate 22028 recognized. Check conflict between Logic Express and external device."
though playback continues, but the screen is locked until continue on the dialogue box is pressed.
Any Help is very much appreciated.
Thanks.
Brad
iBook G4 Mac OS X (10.4.4) Mbox, Roland HP1 Digital Piano, LaCie D2 Hard drive

Oft thought, but neer so well expressed :)
"Pablo" <[email protected]> wrote in message
news:evggsd$pk0$[email protected]..
> Just nuke the splash page, people don't want to see an
animation they want
> to see content, splash pages suck.
>
> --
> Cheers
>
> Pablo
> .................................
> An Eye of Menorca
> www.dellimages.com
> .................................
> "wasyl69" <[email protected]> wrote in
message
> news:evggjs$p5j$[email protected]..
>> To anyone that can help,
>>
>> I have a simple flash animation (named welcome.swf)
placed on a webpage
>> that
>> is the first page of my site (index.html).
>>
>> I am concerned that people who do not have flash
will be sat there
>> staring at
>> a blank screen and unable to enter the rest of the
site (beginning with
>> news.html).
>>
>> Is there any way to detect whether they have flash
or not, and if not,
>> redirect them to another webpage (news.html)???
>>
>> Many Thanks, Al
>>
>
>

Just a quickie

Similar Messages

Maybe you are looking for