Just another temperature issue

Hi everyone,
I'm pretty sure I've already about this thread in another post, but I don't manage to find it. So (in case) please excuse me for the redundancy!
I'd like to mount a lateral fan on my case, in order to cool the cpu. Of course, my cheap case is not supposed to have such a fan, so I've to drill/cut a hole. This is not a problem, as someone else will do the job for me .
The point is: which is the most proper position to mount a side fan? I mean, best performance and no interference with the cpu fan.
Thanks for hints!
Ciao

Hi guys and thank you all for your hints.
Concerning the position of the fan, "pulling in cool air to go DIRECTLY onto the CPU heatsink" was my first idea. But the question still is: could it possibly produce some kinda interference with the cpu fan airflow? Hope not to sound too apprehensive. Fortunately the MSI VGA card has an excellent (and silent) fan, and I don't even use D.O.T.. Thus my very priority still is the CPU.
About PC alert and Speedfan: I've installed the latter on my pc and tested it last night. Well, I still think that PC alert is too optimistic, at least in the case of my PC. I used the above mentioned + Sandra software and the winner is Speedfan. No wonder, as it reports temps bios info. Sandra comes second (+/- 0.5°C with respect to Speedfan) and PC alert cheats: its readings are usually 6-7 °C LOWER than Speedfan.
To conclude (after last night tests):
CPU temps (idle/max): 46/56
PSU (idem): 45/50
VGA (idem): 38/44
Motherboard, case and HDD temps are always below 40.
See ya
Quote
Originally posted by Rogue_Wulff
Quote
About the temps: well everything was fine till I found out that MSI PC alert was a li'l too optimistic: real temps were about 6-7 degrees higher....
PC Alert adds about 4C to the temp of the CPU, so the actual temp is lower than PC Alert claims. Speedfan will show this to be true, as it will average 4C lower than PC Alert. 6-7F if you set them for "F" rather than "C" temps.

Similar Messages

Just another IPC issue

Hello together,
are there some possibilities to get a better perfomance with the ipc? I had tried to find some information in the forums, but didn't find anything.
Maybe someone has some suggestions.
Best regards
Thorsten Börsch

hmmm..there are several:
Set the buffer times for the ipc server to values like 4 hours, so condition records and knowledge bases are not read every time
Try running several IPC in parallel
Try running the IPC on a seperate application server
Try to locate the reasons for the poor performance. I found that the CRM core is sometimes the reason for the delay....
There are a number of messages about those options in the OSS.

HT201365 i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808

Camera Raw Color Temperature Issue

Help me verify color temperature issue please.
I shoot with Canon EOS 5D.
I sat white balance mode to K - Manual Kelvin temperature - and set value to 6000K.
So my raw files should have this setting - color temperature 6000K.
Canon ZoomBrowser EX shows me the value - 6000K
Nevertheless I see different reading in Adobe Camera RAW converter (as shot)?
Photoshop CS2 Camera Raw CT=5600K Tint=+3 (! as Shot !)
Why?

Ramon seemed to have the answer in hand, then G Sch above chimed in with some random comment about coordinate systems. Weirdly, Ramon then agreed with G Sch's nonsense and thanked him for it. Suddenly the thread has suffered an ineluctable defenestration.
Is:
- camera maker's control for XXXX Kelvin wrong?
- Adobe's control for XXXX Kelvin wrong?
- the use of the designator "K" in these contexts wrong, as it implies physics reference for the measure while the camera and ACR just do their own thing?
By the logic used in this thread, 1/250sec shutter doesn't have anything to do with a time standard, nor does F4 mean an aperture, it's just a coordinate in a locally defined system, la la la. So why bother to even code it in EXIF? What's the point of providing a control in terms of K if K isn't normalized?
The question was answered at Ramon's first post: ACR doesn't read the 5D white bal metadata. The camera K setting is used for in-camera processing and by Canon utilities. But note that the raw data are white bal agnostic but white bal results are subject to a camera profile which may differ between OEM and ACR, and at which point there is room for discrepancy for interpretation of color. Which one is right? I can't say. It's important to realize the results for a given K setting may differ between OEM and ACR because of this. Contrary to what G Sch writes above, the same K setting ought to give the same results if a "Kelvin" setting is to have real meaning, but the seems to be impracticable if the developers don't agree on the characterization of the gear.

Replacing SSD in iMac 2011 (Not Just Another Repetitive Thread)

yo I have bought the Crucial M4 SSD 512GB [still in its box] to replace my Apple 256GB in my iMac. I've already done research into this and the temperature issues are isolated to the HDD only.
However, apparently the firmware needs to be updated to rev. 0009 from the Crucial website? Word on the internet is that there are issues with bootcamp booting up on this SSD+Firmware? Can anyone clarify if this is true?
Also, when Apple releases future firmware updates, it will undoubtedly override the Crucial rev.0009? Therefore, will Mac OS X fail to boot or will it run alright?
Any other issues that could potentially arise down the line with this Crucial SSD?
Cheers and mucho appreciata!!
oosk
P.S. I'd be taking to an Apple Authorized Provider to avoid voiding my warranty so I don't like to just give it a go coz, although I'd get a refund for the Crucial SSD if anything goes wrong, I'd still have to pay for their labour costs.

You'll need to work the firmware thing out with Crucial.

Sorry- yet another temperature question

I've read through many, many posts on the ol' temperature issue but couldn't find an answer. Any thoughts would be appreciated.
20" iSight, 1 gb ram. For the 1st year and 2 months the CPU temp was consistently between 110-120F and the HD temp hovered around 105F. A couple months ago it started running much higher-- CPU around 170, HD around 125 (according to Temperature Monitor and xResourceGraph).
Nothing's changed-- same room, same ambient temps, same (not intensive) application usage. I understand that these temps still fall in the normal range, but why the sudden jump?
Perhaps things are just not running as efficiently as before, but I just thought I'd ask in case there's something that I could do (cleaning the fans?) or should have checked.
Thanks very much!

Wow- it worked! Thank you so much for the suggestions. I was surprised to see the amount of dust that came out of the round vent in back. Then I reset the SMU (thanks for the link, MGW) and now I'm running around 110F CPU and 100F HD.
I wish I could have clicked "Solved" for both of you, but I guess you can only do it once.
Much appreciated!

Just another rtorrent ui mod

hi, I have been working on just another rtorrent ui mod, it's mainly inspired from rtorrent-mod by karabaja4 - thanks to him :-)
I am sorry, I haven't made any package yet (need to study for it as never done before). I am attaching a patch for now, apply it from src directory like below.
highlights:
1 - colored more elements (tracker lists, chunks, files list, transferring chunks list etc)
2 - a bit different ui
3 - almost everything done lowercase (I like it like that, sorry if you don't like it)
pwd should be rtorrent/src/rtorrent-0.9.3/src
patch -p1 < ui-rtorrent-mod.patch
Patch:
diff -rupN src/display/canvas.cc src-custom/display/canvas.cc
--- src/display/canvas.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/canvas.cc 2013-06-06 01:54:59.338119016 +0530
@@ -5,12 +5,12 @@
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
+//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
+//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -95,10 +95,21 @@ void
Canvas::initialize() {
if (m_isInitialized)
return;
+
m_isInitialized = true;
initscr();
+
+ /* colors */
+ start_color();
+ use_default_colors();
+ init_pair(1, COLOR_RED, -1);
+ init_pair(2, COLOR_YELLOW, -1);
+ init_pair(3, COLOR_GREEN, -1);
+ init_pair(4, COLOR_BLUE, -1);
+ init_pair(5, COLOR_MAGENTA, -1);
+ init_pair(6, COLOR_CYAN, -1);
+
raw();
noecho();
nodelay(stdscr, TRUE);
@@ -110,7 +121,7 @@ void
Canvas::cleanup() {
if (!m_isInitialized)
return;
+
m_isInitialized = false;
noraw();
diff -rupN src/display/utils.cc src-custom/display/utils.cc
--- src/display/utils.cc 2012-02-14 09:02:01.000000000 +0530
+++ src-custom/display/utils.cc 2013-06-06 01:54:59.338119016 +0530
@@ -53,6 +53,8 @@
#include <torrent/data/file_manager.h>
#include <torrent/download/resource_manager.h>
#include <torrent/peer/client_info.h>
+#include <torrent/peer/connection_list.h>
+#include <torrent/peer/peer_list.h>
#include "core/download.h"
#include "core/manager.h"
@@ -98,9 +100,9 @@ print_hhmmss_local(char* first, char* la
char*
print_ddhhmm(char* first, char* last, time_t t) {
if (t / (24 * 3600) < 100)
- return print_buffer(first, last, "%2id %2i:%02i", (int)t / (24 * 3600), ((int)t / 3600) % 24, ((int)t / 60) % 60);
+ return print_buffer(first, last, "%2id %2i:%02i |", (int)t / (24 * 3600), ((int)t / 3600) % 24, ((int)t / 60) % 60);
else
- return print_buffer(first, last, "--d --:--");
+ return print_buffer(first, last, "--d --:-- |");
char*
@@ -129,26 +131,53 @@ print_address(char* first, char* last, c
char*
print_download_title(char* first, char* last, core::Download* d) {
- return print_buffer(first, last, " %s", d->info()->name().c_str());
+ first = print_buffer(first, last, "%s ", d->info()->name().c_str());
+
+ return first;
+}
+
+char *
+print_download_title_extra(char* first, char* last, core::Download* d) {
+ if (d->is_hash_checking()) {
+ first = print_buffer(first, last, "| checking hash %3i%%",
+ (d->download()->chunks_hashed() * 100) / d->download()->file_list()->size_chunks());
+ } else if (d->tracker_list()->has_active_not_scrape()) {
+ torrent::TrackerList::iterator itr =
+ std::find_if(d->tracker_list()->begin(), d->tracker_list()->end(),
+ std::mem_fun(&torrent::Tracker::is_busy_not_scrape));
+ char status[128];
+
+ (*itr)->get_status(status, sizeof(status));
+ first = print_buffer(first, last, "| connecting to %s %s",
+ (*itr)->url().c_str(), status);
+ } else if (!d->message().empty()) {
+ first = print_buffer(first, last, "| %s", d->message().c_str());
+ } else {
+ *first = '\0';
+ }
+
+ return first;
char*
print_download_info(char* first, char* last, core::Download* d) {
if (!d->download()->info()->is_open())
- first = print_buffer(first, last, "[CLOSED] ");
+ first = print_buffer(first, last, "stop | ");
else if (!d->download()->info()->is_active())
- first = print_buffer(first, last, "[OPEN] ");
+ first = print_buffer(first, last, "open | ");
+ else if (!d->is_done())
+ first = print_buffer(first, last, "load | ");
else
- first = print_buffer(first, last, " ");
+ first = print_buffer(first, last, "---- | ");
if (d->is_done())
- first = print_buffer(first, last, "done %10.1f MB", (double)d->download()->file_list()->size_bytes() / (double)(1 << 20));
+ first = print_buffer(first, last, "done %8.1f mb", (double)d->download()->file_list()->size_bytes() / (double)(1 << 20));
else
- first = print_buffer(first, last, "%6.1f / %6.1f MB",
+ first = print_buffer(first, last, "%6.1f/%6.1f mb",
(double)d->download()->bytes_done() / (double)(1 << 20),
(double)d->download()->file_list()->size_bytes() / (double)(1 << 20));
- first = print_buffer(first, last, " Rate: %5.1f / %5.1f KB Uploaded: %7.1f MB",
+ first = print_buffer(first, last, " | rate: %4.1f/%5.1f kb | uploaded: %5.1f mb |",
(double)d->info()->up_rate()->rate() / (1 << 10),
(double)d->info()->down_rate()->rate() / (1 << 10),
(double)d->info()->up_rate()->total() / (1 << 20));
@@ -157,24 +186,19 @@ print_download_info(char* first, char* l
first = print_buffer(first, last, " ");
first = print_download_percentage_done(first, last, d);
- first = print_buffer(first, last, " ");
+ first = print_buffer(first, last, " | ");
first = print_download_time_left(first, last, d);
- } else {
- first = print_buffer(first, last, " ");
- first = print_buffer(first, last, " [%c%c R: %4.2f",
- rpc::call_command_string("d.tied_to_file", rpc::make_target(d)).empty() ? ' ' : 'T',
- rpc::call_command_value("d.ignore_commands", rpc::make_target(d)) == 0 ? ' ' : 'I',
- (double)rpc::call_command_value("d.ratio", rpc::make_target(d)) / 1000.0);
+ first = print_buffer(first, last, " peers: %i(%i)",
+ (int)d->download()->connection_list()->size(),
+ (int)d->download()->peer_list()->available_list_size());
if (d->priority() != 2)
- first = print_buffer(first, last, " %s", rpc::call_command_string("d.priority_str", rpc::make_target(d)).c_str());
+ first = print_buffer(first, last, " | %s", rpc::call_command_string("d.priority_str", rpc::make_target(d)).c_str());
+ }
if (!d->bencode()->get_key("rtorrent").get_key_string("throttle_name").empty())
- first = print_buffer(first, last , " %s", rpc::call_command_string("d.throttle_name", rpc::make_target(d)).c_str());
- first = print_buffer(first, last , "]");
+ first = print_buffer(first, last , " | %s", rpc::call_command_string("d.throttle_name", rpc::make_target(d)).c_str());
if (first > last)
throw torrent::internal_error("print_download_info(...) wrote past end of the buffer.");
@@ -182,48 +206,48 @@ print_download_info(char* first, char* l
return first;
-char*
-print_download_status(char* first, char* last, core::Download* d) {
- if (d->is_active())
- else if (rpc::call_command_value("d.hashing", rpc::make_target(d)) != 0)
- first = print_buffer(first, last, "Hashing: ");
- else if (!d->is_active())
- first = print_buffer(first, last, "Inactive: ");
- if (d->is_hash_checking()) {
- first = print_buffer(first, last, "Checking hash [%2i%%]",
- (d->download()->chunks_hashed() * 100) / d->download()->file_list()->size_chunks());
- } else if (d->tracker_list()->has_active_not_scrape()) {
- torrent::TrackerList::iterator itr =
- std::find_if(d->tracker_list()->begin(), d->tracker_list()->end(),
- std::mem_fun(&torrent::Tracker::is_busy_not_scrape));
- char status[128];
- (*itr)->get_status(status, sizeof(status));
- first = print_buffer(first, last, "Tracker[%i:%i]: Connecting to %s %s",
- (*itr)->group(), std::distance(d->tracker_list()->begin(), itr), (*itr)->url().c_str(), status);
- } else if (!d->message().empty()) {
- first = print_buffer(first, last, "%s", d->message().c_str());
- } else {
- *first = '\0';
- if (first > last)
- throw torrent::internal_error("print_download_status(...) wrote past end of the buffer.");
- return first;
+char*
+print_download_status(char* first, char* last, core::Download* d) {
+ if (d->is_active())
+ ;
+ else if (rpc::call_command_value("d.hashing", rpc::make_target(d)) != 0)
+ first = print_buffer(first, last, "hashing: ");
+ else if (!d->is_active())
+ first = print_buffer(first, last, "inactive: ");
+
+ if (d->is_hash_checking()) {
+ first = print_buffer(first, last, "checking hash [%2i%%]",
+ (d->download()->chunks_hashed() * 100) / d->download()->file_list()->size_chunks());
+
+ } else if (d->tracker_list()->has_active_not_scrape()) {
+ torrent::TrackerList::iterator itr =
+ std::find_if(d->tracker_list()->begin(), d->tracker_list()->end(),
+ std::mem_fun(&torrent::Tracker::is_busy_not_scrape));
+ char status[128];
+
+ (*itr)->get_status(status, sizeof(status));
+ first = print_buffer(first, last, "tracker[%i:%i]: connecting to %s %s",
+ (*itr)->group(), std::distance(d->tracker_list()->begin(), itr), (*itr)->url().c_str(), status);
+
+ } else if (!d->message().empty()) {
+ first = print_buffer(first, last, "%s", d->message().c_str());
+
+ } else {
+ *first = '\0';
+ }
+
+ if (first > last)
+ throw torrent::internal_error("print_download_status(...) wrote past end of the buffer.");
+
+ return first;
+}
char*
print_download_time_left(char* first, char* last, core::Download* d) {
uint32_t rate = d->info()->down_rate()->rate();
if (rate < 512)
- return print_buffer(first, last, "--d --:--");
+ return print_buffer(first, last, "--d --:-- |");
time_t remaining = (d->download()->file_list()->size_bytes() - d->download()->bytes_done()) / (rate & ~(uint32_t)(512 - 1));
@@ -233,10 +257,9 @@ print_download_time_left(char* first, ch
char*
print_download_percentage_done(char* first, char* last, core::Download* d) {
if (!d->is_open() || d->is_done())
- //return print_buffer(first, last, "[--%%]");
- return print_buffer(first, last, " ");
+ return print_buffer(first, last, " ");
else
- return print_buffer(first, last, "[%2u%%]", (d->download()->file_list()->completed_chunks() * 100) / d->download()->file_list()->size_chunks());
+ return print_buffer(first, last, "%2u%%", (d->download()->file_list()->completed_chunks() * 100) / d->download()->file_list()->size_chunks());
char*
@@ -260,23 +283,23 @@ print_client_version(char* first, char*
char*
print_status_info(char* first, char* last) {
if (!torrent::up_throttle_global()->is_throttled())
- first = print_buffer(first, last, "[Throttle off");
+ first = print_buffer(first, last, "[throttle off");
else
- first = print_buffer(first, last, "[Throttle %3i", torrent::up_throttle_global()->max_rate() / 1024);
+ first = print_buffer(first, last, "[throttle %3i", torrent::up_throttle_global()->max_rate() / 1024);
if (!torrent::down_throttle_global()->is_throttled())
- first = print_buffer(first, last, "/off KB]");
+ first = print_buffer(first, last, "/off kb]");
else
- first = print_buffer(first, last, "/%3i KB]", torrent::down_throttle_global()->max_rate() / 1024);
+ first = print_buffer(first, last, "/%3i kb]", torrent::down_throttle_global()->max_rate() / 1024);
- first = print_buffer(first, last, " [Rate %5.1f/%5.1f KB]",
+ first = print_buffer(first, last, " [rate %4.1f/%5.1f kb]",
(double)torrent::up_rate()->rate() / 1024.0,
(double)torrent::down_rate()->rate() / 1024.0);
- first = print_buffer(first, last, " [Port: %i]", (unsigned int)torrent::connection_manager()->listen_port());
+ first = print_buffer(first, last, " [port: %i]", (unsigned int)torrent::connection_manager()->listen_port());
if (!rak::socket_address::cast_from(torrent::connection_manager()->local_address())->is_address_any()) {
- first = print_buffer(first, last, " [Local ");
+ first = print_buffer(first, last, " [local ");
first = print_address(first, last, torrent::connection_manager()->local_address());
first = print_buffer(first, last, "]");
@@ -285,7 +308,7 @@ print_status_info(char* first, char* las
throw torrent::internal_error("print_status_info(...) wrote past end of the buffer.");
if (!rak::socket_address::cast_from(torrent::connection_manager()->bind_address())->is_address_any()) {
- first = print_buffer(first, last, " [Bind ");
+ first = print_buffer(first, last, " [bind ");
first = print_address(first, last, torrent::connection_manager()->bind_address());
first = print_buffer(first, last, "]");
@@ -295,24 +318,24 @@ print_status_info(char* first, char* las
char*
print_status_extra(char* first, char* last) {
- first = print_buffer(first, last, " [U %i/%i]",
+ first = print_buffer(first, last, " [u %i/%i]",
torrent::resource_manager()->currently_upload_unchoked(),
torrent::resource_manager()->max_upload_unchoked());
- first = print_buffer(first, last, " [D %i/%i]",
+ first = print_buffer(first, last, " [d %i/%i]",
torrent::resource_manager()->currently_download_unchoked(),
torrent::resource_manager()->max_download_unchoked());
- first = print_buffer(first, last, " [H %u/%u]",
+ first = print_buffer(first, last, " [h %u/%u]",
control->core()->http_stack()->active(),
control->core()->http_stack()->max_active());
- first = print_buffer(first, last, " [S %i/%i/%i]",
+ first = print_buffer(first, last, " [s %i/%i/%i]",
torrent::total_handshakes(),
torrent::connection_manager()->size(),
torrent::connection_manager()->max_size());
- first = print_buffer(first, last, " [F %i/%i]",
+ first = print_buffer(first, last, " [f %i/%i]",
torrent::file_manager()->open_files(),
torrent::file_manager()->max_open_files());
diff -rupN src/display/utils.h src-custom/display/utils.h
--- src/display/utils.h 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/utils.h 2013-06-06 01:54:59.331452368 +0530
@@ -66,6 +66,7 @@ char* print_ddhhmm(char* first, ch
char* print_ddmmyyyy(char* first, char* last, time_t t);
char* print_download_title(char* first, char* last, core::Download* d);
+char* print_download_title_extra(char* first, char* last, core::Download* d);
char* print_download_info(char* first, char* last, core::Download* d);
char* print_download_status(char* first, char* last, core::Download* d);
char* print_download_time_left(char* first, char* last, core::Download* d);
diff -rupN src/display/window_download_chunks_seen.cc src-custom/display/window_download_chunks_seen.cc
--- src/display/window_download_chunks_seen.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_download_chunks_seen.cc 2013-06-06 02:04:03.243342326 +0530
@@ -66,7 +66,7 @@ WindowDownloadChunksSeen::redraw() {
if (m_canvas->height() < 3 || m_canvas->width() < 18)
return;
- m_canvas->print(2, 0, "Chunks seen: [C/A/D %i/%i/%.2f]",
+ m_canvas->print(2, 0, "chunks seen: [c/a/d %i/%i/%.2f]",
(int)m_download->download()->peers_complete() + m_download->download()->file_list()->is_done(),
(int)m_download->download()->peers_accounted(),
std::floor(m_download->distributed_copies() * 100.0f) / 100.0f);
@@ -74,15 +74,16 @@ WindowDownloadChunksSeen::redraw() {
const uint8_t* seen = m_download->download()->chunks_seen();
if (seen == NULL || m_download->download()->file_list()->bitfield()->empty()) {
- m_canvas->print(2, 2, "Not available.");
+ m_canvas->print(2, 2, "not available.");
return;
if (!m_download->is_done()) {
- m_canvas->print(36, 0, "X downloaded missing queued downloading");
- m_canvas->print_char(50, 0, 'X' | A_BOLD);
- m_canvas->print_char(61, 0, 'X' | A_BOLD | A_UNDERLINE);
- m_canvas->print_char(71, 0, 'X' | A_REVERSE);
+ m_canvas->print(36, 0, " downloaded missing queued downloading");
+ m_canvas->print_char(36, 0, 'x' | COLOR_PAIR(3));
+ m_canvas->print_char(50, 0, 'x' | COLOR_PAIR(1));
+ m_canvas->print_char(61, 0, 'x' | A_UNDERLINE);
+ m_canvas->print_char(71, 0, 'x' | COLOR_PAIR(6));
*m_focus = std::min(*m_focus, max_focus());
@@ -109,15 +110,15 @@ WindowDownloadChunksSeen::redraw() {
chtype attr;
if (bitfield->get(chunk - seen)) {
- attr = A_NORMAL;
+ attr = COLOR_PAIR(3);
} else if (itrTransfer != transferChunks.end() && (uint32_t)(chunk - seen) == (*itrTransfer)->index()) {
if (std::find_if((*itrTransfer)->begin(), (*itrTransfer)->end(), std::mem_fun_ref(&torrent::Block::is_transfering)) != (*itrTransfer)->end())
- attr = A_REVERSE;
+ attr = COLOR_PAIR(1);
else
- attr = A_BOLD | A_UNDERLINE;
+ attr = A_UNDERLINE;
itrTransfer++;
} else {
- attr = A_BOLD;
+ attr = COLOR_PAIR(6);
m_canvas->print_char(attr | rak::value_to_hexchar<0>(std::min<uint8_t>(*chunk, 0xF)));
diff -rupN src/display/window_download_list.cc src-custom/display/window_download_list.cc
--- src/display/window_download_list.cc 2012-02-14 09:02:01.000000000 +0530
+++ src-custom/display/window_download_list.cc 2013-06-06 01:54:59.331452368 +0530
@@ -71,7 +71,7 @@ WindowDownloadList::redraw() {
if (m_view == NULL)
return;
- m_canvas->print(0, 0, "%s", ("[View: " + m_view->name() + "]").c_str());
+ m_canvas->print(0, 0, "%s", ("[view: " + m_view->name() + "]").c_str());
if (m_view->empty_visible() || m_canvas->width() < 5 || m_canvas->height() < 2)
return;
@@ -81,7 +81,7 @@ WindowDownloadList::redraw() {
Range range = rak::advance_bidirectional(m_view->begin_visible(),
m_view->focus() != m_view->end_visible() ? m_view->focus() : m_view->begin_visible(),
m_view->end_visible(),
- m_canvas->height() / 3);
+ (m_canvas->height() - 1) / 3);
// Make sure we properly fill out the last lines so it looks like
// there are more torrents, yet don't hide it if we got the last one
@@ -89,21 +89,54 @@ WindowDownloadList::redraw() {
if (range.second != m_view->end_visible())
++range.second;
- int pos = 1;
+ int pos = 2;
while (range.first != range.second) {
char buffer[m_canvas->width() + 1];
char* last = buffer + m_canvas->width() - 2 + 1;
+ int title_length;
+ //do not print on last lines if cannot show whole torrent
+ if (pos >= (m_canvas->height() - 1))
+ break;
+
+ // print title
print_download_title(buffer, last, *range.first);
- m_canvas->print(0, pos++, "%c %s", range.first == m_view->focus() ? '*' : ' ', buffer);
- print_download_info(buffer, last, *range.first);
- m_canvas->print(0, pos++, "%c %s", range.first == m_view->focus() ? '*' : ' ', buffer);
+ m_canvas->print(0, pos, "%c %s", range.first == m_view->focus() ? '>' : ' ', buffer);
+ title_length = strlen(buffer);
+ if ((*range.first)->is_done()) {
+ m_canvas->set_attr(2, pos, (title_length), A_BOLD, 3);
+ } else {
+ m_canvas->set_attr(2, pos, (title_length), A_BOLD, 2);
+ }
+ //print title extra
+ print_download_title_extra(buffer, last, *range.first);
+
+ //do not let title extra get off screen
+ buffer[m_canvas->width() - title_length - 2] = '\0';
+ m_canvas->print((title_length + 2), pos++, "%s", buffer);
- print_download_status(buffer, last, *range.first);
- m_canvas->print(0, pos++, "%c %s", range.first == m_view->focus() ? '*' : ' ', buffer);
+ print_download_info(buffer, last, *range.first);
+ m_canvas->print(0, pos, " %s", buffer);
+ if (!(*range.first)->info()->is_open()) {
+ //closed
+ m_canvas->set_attr(2, pos, 4, A_BOLD, 1);
+ } else if (!(*range.first)->info()->is_active()) {
+ //paused
+ m_canvas->set_attr(2, pos, 4, A_BOLD, 2);
+ } else {
+ //active
+ m_canvas->set_attr(2, pos, 4, A_BOLD, 3);
+ }
+
+ if ((*range.first)->is_done()) {
+ //finished
+ m_canvas->set_attr(9, pos, 16, A_BOLD, 3);
+ }
+ m_canvas->set_attr(28, pos, (strlen(buffer) - 26), A_NORMAL, 6);
+ pos++;
+ pos++;
++range.first;
diff -rupN src/display/window_download_statusbar.cc src-custom/display/window_download_statusbar.cc
--- src/display/window_download_statusbar.cc 2012-02-14 09:02:01.000000000 +0530
+++ src-custom/display/window_download_statusbar.cc 2013-06-06 01:54:59.328119043 +0530
@@ -68,7 +68,7 @@ WindowDownloadStatusbar::redraw() {
print_download_info(buffer, last, m_download);
m_canvas->print(0, 0, "%s", buffer);
- snprintf(buffer, last - buffer, "Peers: %i(%i) Min/Max: %i/%i Slots: U:%i/%i D:%i/%i U/I/C/A: %i/%i/%i/%i Unchoked: %u/%u Failed: %i",
+ snprintf(buffer, last - buffer, "peers: %i(%i) min/max: %i/%i slots: u:%i/%i d:%i/%i u/i/c/a: %i/%i/%i/%i unchoked: %u/%u failed: %i",
(int)m_download->download()->connection_list()->size(),
(int)m_download->download()->peer_list()->available_list_size(),
(int)m_download->download()->connection_list()->min_size(),
diff -rupN src/display/window_download_transfer_list.cc src-custom/display/window_download_transfer_list.cc
--- src/display/window_download_transfer_list.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_download_transfer_list.cc 2013-06-06 01:54:59.331452368 +0530
@@ -65,7 +65,7 @@ WindowDownloadTransferList::redraw() {
const torrent::TransferList* transfers = m_download->download()->transfer_list();
- m_canvas->print(2, 0, "Transfer list: [Size %i]", transfers->size());
+ m_canvas->print(2, 0, "transfer list: [size %i]", transfers->size());
torrent::TransferList::const_iterator itr = transfers->begin();
@@ -74,7 +74,7 @@ WindowDownloadTransferList::redraw() {
// prettify this. (This is a very subtle hint)
for (unsigned int y = 1; y < m_canvas->height() && itr != transfers->end(); ++y, ++itr) {
- m_canvas->print(0, y, "%5u [P: %u F: %u]", (*itr)->index(), (*itr)->priority(), (*itr)->failed());
+ m_canvas->print(0, y, "%5u [p: %u f: %u]", (*itr)->index(), (*itr)->priority(), (*itr)->failed());
// Handle window size.
for (torrent::BlockList::const_iterator bItr = (*itr)->begin(), bLast = (*itr)->end(); bItr != bLast; ++bItr) {
@@ -89,7 +89,7 @@ WindowDownloadTransferList::redraw() {
chtype attr = A_NORMAL;
if (bItr->is_finished()) {
- attr = A_REVERSE;
+ attr = COLOR_PAIR(3);
id = key_id(bItr->leader()->const_peer_info());
} else if (bItr->is_transfering()) {
diff -rupN src/display/window_file_list.cc src-custom/display/window_file_list.cc
--- src/display/window_file_list.cc 2012-02-14 09:02:01.000000000 +0530
+++ src-custom/display/window_file_list.cc 2013-06-06 01:54:59.338119016 +0530
@@ -154,9 +154,9 @@ WindowFileList::redraw() {
unsigned int pos = 0;
- int filenameWidth = m_canvas->width() - 16;
+ int filenameWidth = m_canvas->width() - 18;
- m_canvas->print(0, pos++, "Cmp Pri Size Filename");
+ m_canvas->print(0, pos++, "cmp pri size filename");
while (pos != m_canvas->height()) {
iterator itr = entries[first];
@@ -164,17 +164,17 @@ WindowFileList::redraw() {
if (itr == iterator(fl->end()))
break;
- m_canvas->set_default_attributes(itr == m_element->selected() ? is_focused() ? A_REVERSE : A_BOLD : A_NORMAL);
+ m_canvas->set_default_attributes(itr == m_element->selected() ? is_focused() ? COLOR_PAIR(3) : A_NORMAL : A_NORMAL);
if (itr.is_empty()) {
- m_canvas->print(0, pos, "%*c%-*s", 16, ' ', filenameWidth, "EMPTY");
+ m_canvas->print(0, pos, "%*c%-*s", 18, ' ', filenameWidth, "empty");
} else if (itr.is_entering()) {
- m_canvas->print(0, pos, "%*c %ls", 16 + itr.depth(), '\\',
- itr.depth() < (*itr)->path()->size() ? wstring_width((*itr)->path()->at(itr.depth()), filenameWidth - itr.depth() - 1).c_str() : L"UNKNOWN");
+ m_canvas->print(0, pos, "%*c %ls", 18 + itr.depth(), '\\',
+ itr.depth() < (*itr)->path()->size() ? wstring_width((*itr)->path()->at(itr.depth()), filenameWidth - itr.depth() - 1).c_str() : L"unknown");
} else if (itr.is_leaving()) {
- m_canvas->print(0, pos, "%*c %-*s", 16 + (itr.depth() - 1), '/', filenameWidth - (itr.depth() - 1), "");
+ m_canvas->print(0, pos, "%*c %-*s", 18 + (itr.depth() - 1), '/', filenameWidth - (itr.depth() - 1), "");
} else if (itr.is_file()) {
torrent::File* e = *itr;
@@ -185,7 +185,7 @@ WindowFileList::redraw() {
case torrent::PRIORITY_OFF: priority = "off"; break;
case torrent::PRIORITY_NORMAL: priority = " "; break;
case torrent::PRIORITY_HIGH: priority = "hig"; break;
- default: priority = "BUG"; break;
+ default: priority = "bug"; break;
m_canvas->print(0, pos, "%3d %s ", done_percentage(e), priority);
@@ -193,19 +193,19 @@ WindowFileList::redraw() {
int64_t val = e->size_bytes();
if (val < (int64_t(1000) << 10))
- m_canvas->print(8, pos, "%5.1f K", (double)val / (int64_t(1) << 10));
+ m_canvas->print(8, pos, " %5.1f k ", (double)val / (int64_t(1) << 10));
else if (val < (int64_t(1000) << 20))
- m_canvas->print(8, pos, "%5.1f M", (double)val / (int64_t(1) << 20));
+ m_canvas->print(8, pos, " %5.1f m ", (double)val / (int64_t(1) << 20));
else if (val < (int64_t(1000) << 30))
- m_canvas->print(8, pos, "%5.1f G", (double)val / (int64_t(1) << 30));
+ m_canvas->print(8, pos, " %5.1f g ", (double)val / (int64_t(1) << 30));
else
- m_canvas->print(8, pos, "%5.1f T", (double)val / (int64_t(1) << 40));
+ m_canvas->print(8, pos, " %5.1f t ", (double)val / (int64_t(1) << 40));
- m_canvas->print(15, pos, "%*c %ls", 1 + itr.depth(), '|',
- itr.depth() < (*itr)->path()->size() ? wstring_width((*itr)->path()->at(itr.depth()), filenameWidth - itr.depth() - 1).c_str() : L"UNKNOWN");
+ m_canvas->print(17, pos, "%*c %ls", 1 + itr.depth(), '|',
+ itr.depth() < (*itr)->path()->size() ? wstring_width((*itr)->path()->at(itr.depth()), filenameWidth - itr.depth() - 1).c_str() : L"unknown");
} else {
- m_canvas->print(0, pos, "BORK BORK");
+ m_canvas->print(0, pos, "bork bork");
m_canvas->set_default_attributes(A_NORMAL);
diff -rupN src/display/window_http_queue.cc src-custom/display/window_http_queue.cc
--- src/display/window_http_queue.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_http_queue.cc 2013-06-06 01:54:59.328119043 +0530
@@ -70,7 +70,7 @@ WindowHttpQueue::redraw() {
m_canvas->erase();
- m_canvas->print(0, 0, "Http [%i]", m_queue->size());
+ m_canvas->print(0, 0, "http [%i]", m_queue->size());
unsigned int pos = 10;
Container::iterator itr = m_container.begin();
diff -rupN src/display/window_input.cc src-custom/display/window_input.cc
--- src/display/window_input.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_input.cc 2013-06-06 01:54:59.338119016 +0530
@@ -49,7 +49,7 @@ WindowInput::redraw() {
m_canvas->print(0, 0, "%s> %s", m_title.c_str(), m_input != NULL ? m_input->c_str() : "<NULL>");
if (m_focus)
- m_canvas->set_attr(m_input->get_pos() + 2 + m_title.size(), 0, 1, A_REVERSE, COLOR_PAIR(0));
+ m_canvas->set_attr(m_input->get_pos() + 2 + m_title.size(), 0, 1, A_BOLD, 3);
diff -rupN src/display/window_peer_list.cc src-custom/display/window_peer_list.cc
--- src/display/window_peer_list.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_peer_list.cc 2013-06-06 01:54:59.334785692 +0530
@@ -68,16 +68,16 @@ WindowPeerList::redraw() {
int x = 2;
int y = 0;
- m_canvas->print(x, y, "IP"); x += 16;
- m_canvas->print(x, y, "UP"); x += 7;
- m_canvas->print(x, y, "DOWN"); x += 7;
- m_canvas->print(x, y, "PEER"); x += 7;
- m_canvas->print(x, y, "CT/RE/LO"); x += 10;
- m_canvas->print(x, y, "QS"); x += 6;
- m_canvas->print(x, y, "DONE"); x += 6;
- m_canvas->print(x, y, "REQ"); x += 6;
- m_canvas->print(x, y, "SNUB"); x += 6;
- m_canvas->print(x, y, "FAILED");
+ m_canvas->print(x, y, "ip"); x += 16;
+ m_canvas->print(x, y, "up"); x += 7;
+ m_canvas->print(x, y, "down"); x += 7;
+ m_canvas->print(x, y, "peer"); x += 7;
+ m_canvas->print(x, y, "ct/re/lo"); x += 10;
+ m_canvas->print(x, y, "qs"); x += 6;
+ m_canvas->print(x, y, "done"); x += 6;
+ m_canvas->print(x, y, "req"); x += 6;
+ m_canvas->print(x, y, "snub"); x += 6;
+ m_canvas->print(x, y, "failed");
++y;
diff -rupN src/display/window_title.cc src-custom/display/window_title.cc
--- src/display/window_title.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/display/window_title.cc 2013-06-06 01:54:59.338119016 +0530
@@ -47,7 +47,9 @@ WindowTitle::redraw() {
m_canvas->erase();
m_canvas->print(std::max(0, ((int)m_canvas->width() - (int)m_title.size()) / 2 - 4), 0,
- "*** %s ***", m_title.c_str());
+ "--- %s ---", m_title.c_str());
+ m_canvas->set_attr((((int)m_canvas->width() - (int)m_title.size()) / 2 - 4), 0, 3, A_BOLD, 1);
+ m_canvas->set_attr(((((int)m_canvas->width() - (int)m_title.size()) / 2) + (int)m_title.size() + 1), 0, 3, A_BOLD, 1);
diff -rupN src/display/window_tracker_list.cc src-custom/display/window_tracker_list.cc
--- src/display/window_tracker_list.cc 2012-04-10 18:16:51.000000000 +0530
+++ src-custom/display/window_tracker_list.cc 2013-06-06 01:54:59.331452368 +0530
@@ -65,7 +65,7 @@ WindowTrackerList::redraw() {
torrent::TrackerList* tl = m_download->tracker_list();
torrent::TrackerController* tc = m_download->tracker_controller();
- m_canvas->print(2, pos, "Trackers: [Key: %08x] [%s %s %s]",
+ m_canvas->print(2, pos, "trackers: [key: %08x] [%s %s %s]",
tl->key(),
tc->is_requesting() ? "req" : " ",
tc->is_promiscuous_mode() ? "prom" : " ",
@@ -99,7 +99,7 @@ WindowTrackerList::redraw() {
else
state = " ";
- m_canvas->print(0, pos++, "%s Id: %s Counters: %uf / %us (%u) %s S/L/D: %u/%u/%u (%u/%u)",
+ m_canvas->print(0, pos++, "%s id: %s counters: %uf / %us (%u) %s s/l/d: %u/%u/%u (%u/%u)",
state,
rak::copy_escape_html(tracker->tracker_id()).c_str(),
tracker->failed_counter(),
@@ -114,13 +114,13 @@ WindowTrackerList::redraw() {
if (range.first == *m_focus) {
- m_canvas->set_attr(4, pos - 2, m_canvas->width(), is_focused() ? A_REVERSE : A_BOLD, COLOR_PAIR(0));
- m_canvas->set_attr(4, pos - 1, m_canvas->width(), is_focused() ? A_REVERSE : A_BOLD, COLOR_PAIR(0));
+ m_canvas->set_attr(4, pos - 2, m_canvas->width(), is_focused() ? A_BOLD : A_NORMAL, 3);
+ m_canvas->set_attr(4, pos - 1, m_canvas->width(), is_focused() ? A_BOLD : A_NORMAL, 3);
if (tracker->is_busy()) {
- m_canvas->set_attr(0, pos - 2, 4, A_REVERSE, COLOR_PAIR(0));
- m_canvas->set_attr(0, pos - 1, 4, A_REVERSE, COLOR_PAIR(0));
+ m_canvas->set_attr(0, pos - 2, 4, A_BOLD, 2);
+ m_canvas->set_attr(0, pos - 1, 4, A_BOLD, 2);
range.first++;
diff -rupN src/ui/download.cc src-custom/ui/download.cc
--- src/ui/download.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/ui/download.cc 2013-06-06 01:54:59.404785502 +0530
@@ -109,22 +109,22 @@ inline ElementBase*
Download::create_menu() {
ElementMenu* element = new ElementMenu;
- element->push_back("Peer list",
+ element->push_back("peer list",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_PEER_LIST),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_PEER_LIST));
- element->push_back("Info",
+ element->push_back("info",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_INFO),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_INFO));
- element->push_back("File list",
+ element->push_back("file list",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_FILE_LIST),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_FILE_LIST));
- element->push_back("Tracker list",
+ element->push_back("tracker list",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_TRACKER_LIST),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_TRACKER_LIST));
- element->push_back("Chunks seen",
+ element->push_back("chunks seen",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_CHUNKS_SEEN),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_CHUNKS_SEEN));
- element->push_back("Transfer list",
+ element->push_back("transfer list",
sigc::bind(sigc::mem_fun(this, &Download::activate_display_focus), DISPLAY_TRANSFER_LIST),
sigc::bind(sigc::mem_fun(this, &Download::activate_display_menu), DISPLAY_TRANSFER_LIST));
@@ -149,41 +149,41 @@ Download::create_info() {
// Get these bindings with some kind of string map.
- element->push_column("Name:", te_command("d.name="));
- element->push_column("Local id:", te_command("d.local_id_html="));
- element->push_column("Info hash:", te_command("d.hash="));
- element->push_column("Created:", te_command("cat=$convert.date=$d.creation_date=,\" \",$convert.time=$d.creation_date="));
+ element->push_column("name:", te_command("d.name="));
+ element->push_column("local id:", te_command("d.local_id_html="));
+ element->push_column("info hash:", te_command("d.hash="));
+ element->push_column("created:", te_command("cat=$convert.date=$d.creation_date=,\" \",$convert.time=$d.creation_date="));
element->push_back("");
- element->push_column("Directory:", te_command("d.directory="));
- element->push_column("Base Path:", te_command("d.base_path="));
- element->push_column("Tied to file:", te_command("d.tied_to_file="));
- element->push_column("File stats:", te_command("cat=$if=$d.is_multi_file=\\,multi\\,single,\" \",$d.size_files=,\" files\""));
+ element->push_column("directory:", te_command("d.directory="));
+ element->push_column("base Path:", te_command("d.base_path="));
+ element->push_column("tied to file:", te_command("d.tied_to_file="));
+ element->push_column("file stats:", te_command("cat=$if=$d.is_multi_file=\\,multi\\,single,\" \",$d.size_files=,\" files\""));
element->push_back("");
- element->push_column("Chunks:", te_command("cat=(d.completed_chunks),\" / \",(d.size_chunks),\" * \",(d.chunk_size),\" (\",(d.wanted_chunks),\")\""));
- element->push_column("Priority:", te_command("d.priority="));
- element->push_column("Peer exchange:", te_command("cat=$if=$d.peer_exchange=\\,enabled\\,disabled,\\ ,"
+ element->push_column("chunks:", te_command("cat=(d.completed_chunks),\" / \",(d.size_chunks),\" * \",(d.chunk_size),\" (\",(d.wanted_chunks),\")\""));
+ element->push_column("priority:", te_command("d.priority="));
+ element->push_column("peer exchange:", te_command("cat=$if=$d.peer_exchange=\\,enabled\\,disabled,\\ ,"
"$if=$d.is_pex_active=\\,active\\,$d.is_private=\\,private\\,inactive,"
"\\ (,$d.size_pex=,/,$d.max_size_pex=,)"));
- element->push_column("State changed:", te_command("convert.elapsed_time=$d.state_changed="));
+ element->push_column("state changed:", te_command("convert.elapsed_time=$d.state_changed="));
element->push_back("");
- element->push_column("Memory usage:", te_command("cat=$convert.mb=$pieces.memory.current=,\" MB\""));
- element->push_column("Max memory usage:", te_command("cat=$convert.mb=$pieces.memory.max=,\" MB\""));
- element->push_column("Free diskspace:", te_command("cat=$convert.mb=$d.free_diskspace=,\" MB\""));
- element->push_column("Safe diskspace:", te_command("cat=$convert.mb=$pieces.sync.safe_free_diskspace=,\" MB\""));
+ element->push_column("memory usage:", te_command("cat=$convert.mb=$pieces.memory.current=,\" MB\""));
+ element->push_column("max memory usage:", te_command("cat=$convert.mb=$pieces.memory.max=,\" MB\""));
+ element->push_column("free diskspace:", te_command("cat=$convert.mb=$d.free_diskspace=,\" MB\""));
+ element->push_column("safe diskspace:", te_command("cat=$convert.mb=$pieces.sync.safe_free_diskspace=,\" MB\""));
element->push_back("");
- element->push_column("Connection type:", te_command("cat=(d.connection_current),\" \",(if,(d.accepting_seeders),"",\"no_seeders\")"));
- element->push_column("Choke heuristic:", te_command("cat=(d.up.choke_heuristics),\", \",(d.down.choke_heuristics),\", \",(d.group)"));
- element->push_column("Safe sync:", te_command("if=$pieces.sync.always_safe=,yes,no"));
- element->push_column("Send buffer:", te_command("cat=$convert.kb=$network.send_buffer.size=,\" KB\""));
- element->push_column("Receive buffer:", te_command("cat=$convert.kb=$network.receive_buffer.size=,\" KB\""));
+ element->push_column("connection type:", te_command("cat=(d.connection_current),\" \",(if,(d.accepting_seeders),"",\"no_seeders\")"));
+ element->push_column("choke heuristic:", te_command("cat=(d.up.choke_heuristics),\", \",(d.down.choke_heuristics),\", \",(d.group)"));
+ element->push_column("safe sync:", te_command("if=$pieces.sync.always_safe=,yes,no"));
+ element->push_column("send buffer:", te_command("cat=$convert.kb=$network.send_buffer.size=,\" KB\""));
+ element->push_column("receive buffer:", te_command("cat=$convert.kb=$network.receive_buffer.size=,\" KB\""));
// TODO: Define a custom command for this and use $argument.0 instead of looking up the name multiple times?
- element->push_column("Throttle:", te_command("branch=d.throttle_name=,\""
+ element->push_column("throttle:", te_command("branch=d.throttle_name=,\""
"cat=$d.throttle_name=,\\\" [Max \\\","
"$convert.throttle=$throttle.up.max=$d.throttle_name=,\\\"/\\\","
"$convert.throttle=$throttle.down.max=$d.throttle_name=,\\\" KB] [Rate \\\","
@@ -192,10 +192,10 @@ Download::create_info() {
"cat=\"global\""));
element->push_back("");
- element->push_column("Upload:", te_command("cat=$convert.kb=$d.up.rate=,\" KB / \",$convert.xb=$d.up.total="));
- element->push_column("Download:", te_command("cat=$convert.kb=$d.down.rate=,\" KB / \",$convert.xb=$d.down.total="));
- element->push_column("Skipped:", te_command("cat=$convert.kb=$d.skip.rate=,\" KB / \",$convert.xb=$d.skip.total="));
- element->push_column("Preload:", te_command("cat=$pieces.preload.type=,\" / \",$pieces.stats_preloaded=,\" / \",$pieces.stats_preloaded="));
+ element->push_column("upload:", te_command("cat=$convert.kb=$d.up.rate=,\" KB / \",$convert.xb=$d.up.total="));
+ element->push_column("download:", te_command("cat=$convert.kb=$d.down.rate=,\" KB / \",$convert.xb=$d.down.total="));
+ element->push_column("skipped:", te_command("cat=$convert.kb=$d.skip.rate=,\" KB / \",$convert.xb=$d.skip.total="));
+ element->push_column("preload:", te_command("cat=$pieces.preload.type=,\" / \",$pieces.stats_preloaded=,\" / \",$pieces.stats_preloaded="));
element->set_column_width(element->column_width() + 1);
diff -rupN src/ui/download_list.cc src-custom/ui/download_list.cc
--- src/ui/download_list.cc 2012-03-13 17:40:49.000000000 +0530
+++ src-custom/ui/download_list.cc 2013-06-06 01:54:59.404785502 +0530
@@ -221,12 +221,12 @@ DownloadList::activate_display(Display d
// Set title.
switch (displayType) {
case DISPLAY_DOWNLOAD_LIST:
- control->ui()->window_title()->set_title("rTorrent " VERSION "/" +
+ control->ui()->window_title()->set_title("rtorrent-custom " VERSION "/" +
std::string(torrent::version()) + " - " +
rpc::call_command_string("session.name"));
break;
case DISPLAY_LOG:
- control->ui()->window_title()->set_title("Log");
+ control->ui()->window_title()->set_title("log");
break;
default: break;
diff -rupN src/ui/element_download_list.cc src-custom/ui/element_download_list.cc
--- src/ui/element_download_list.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/ui/element_download_list.cc 2013-06-06 01:54:59.404785502 +0530
@@ -59,7 +59,7 @@ ElementDownloadList::ElementDownloadList
m_window(NULL),
m_view(NULL) {
- receive_change_view("main");
+ receive_change_view("name");
if (m_view == NULL)
throw torrent::internal_error("View \"main\" must be present to initialize the main display.");
@@ -153,7 +153,7 @@ ElementDownloadList::receive_command(con
m_view->set_last_changed();
} catch (torrent::input_error& e) {
- lt_log_print(torrent::LOG_WARN, "Command failed: %s", e.what());
+ lt_log_print(torrent::LOG_WARN, "command failed: %s", e.what());
return;
diff -rupN src/ui/element_file_list.cc src-custom/ui/element_file_list.cc
--- src/ui/element_file_list.cc 2012-01-19 15:48:01.000000000 +0530
+++ src-custom/ui/element_file_list.cc 2013-06-06 01:54:59.408118826 +0530
@@ -86,19 +86,19 @@ element_file_list_create_info() {
element->set_column(1);
element->set_interval(1);
- element->push_back("File info:");
+ element->push_back("file info:");
element->push_back("");
- element->push_column("Filename:", te_command("fi.filename_last="));
+ element->push_column("filename:", te_command("fi.filename_last="));
element->push_back("");
- element->push_column("Size:", te_command("if=$fi.is_file=,$convert.xb=$f.size_bytes=,---"));
- element->push_column("Chunks:", te_command("cat=$f.completed_chunks=,\" / \",$f.size_chunks="));
- element->push_column("Range:", te_command("cat=$f.range_first=,\" - \",$f.range_second="));
+ element->push_column("size:", te_command("if=$fi.is_file=,$convert.xb=$f.size_bytes=,---"));
+ element->push_column("chunks:", te_command("cat=$f.completed_chunks=,\" / \",$f.size_chunks="));
+ element->push_column("range:", te_command("cat=$f.range_first=,\" - \",$f.range_second="));
element->push_back("");
- element->push_column("Queued:", te_command("cat=\"$if=$f.is_create_queued=,create\",\" \",\"$if=$f.is_resize_queued=,resize\""));
- element->push_column("Prioritize:", te_command("cat=\"$if=$f.prioritize_first=,first\",\" \",\"$if=$f.prioritize_last=,last\""));
+ element->push_column("queued:", te_command("cat=\"$if=$f.is_create_queued=,create\",\" \",\"$if=$f.is_resize_queued=,resize\""));
+ element->push_column("prioritize:", te_command("cat=\"$if=$f.prioritize_first=,first\",\" \",\"$if=$f.prioritize_last=,last\""));
element->set_column_width(element->column_width() + 1);
diff -rupN src/ui/element_peer_list.cc src-custom/ui/element_peer_list.cc
--- src/ui/element_peer_list.cc 2012-04-09 12:09:14.000000000 +0530
+++ src-custom/ui/element_peer_list.cc 2013-06-06 01:54:59.404785502 +0530
@@ -106,24 +106,24 @@ ElementPeerList::create_info() {
element->set_column(1);
element->set_interval(1);
- element->push_back("Peer info:");
+ element->push_back("peer info:");
element->push_back("");
- element->push_column("Address:", te_command("cat=$p.address=,:,$p.port="));
- element->push_column("Id:", te_command("p.id_html="));
- element->push_column("Client:", te_command("p.client_version="));
- element->push_column("Options:", te_command("p.options_str="));
- element->push_column("Connected:", te_command("if=$p.is_incoming=,incoming,outgoing"));
- element->push_column("Encrypted:", te_command("if=$p.is_encrypted=,yes,$p.is_obfuscated=,handshake,no"));
+ element->push_column("address:", te_command("cat=$p.address=,:,$p.port="));
+ element->push_column("id:", te_command("p.id_html="));
+ element->push_column("client:", te_command("p.client_version="));
+ element->push_column("options:", te_command("p.options_str="));
+ element->push_column("connected:", te_command("if=$p.is_incoming=,incoming,outgoing"));
+ element->push_column("encrypted:", te_command("if=$p.is_encrypted=,yes,$p.is_obfuscated=,handshake,no"));
element->push_back("");
- element->push_column("Snubbed:", te_command("if=$p.is_snubbed=,yes,no"));
- element->push_column("Done:", te_command("p.completed_percent="));
- element->push_column("Rate:", te_command("cat=$convert.kb=$p.up_rate=,\\ KB\\ ,$convert.kb=$p.down_rate=,\\ KB"));
- element->push_column("Total:", te_command("cat=$convert.kb=$p.up_total=,\\ KB\\ ,$convert.kb=$p.down_total=,\\ KB"));
+ element->push_column("snubbed:", te_command("if=$p.is_snubbed=,yes,no"));
+ element->push_column("done:", te_command("p.completed_percent="));
+ element->push_column("rate:", te_command("cat=$convert.kb=$p.up_rate=,\\ KB\\ ,$convert.kb=$p.down_rate=,\\ KB"));
+ element->push_column("total:", te_command("cat=$convert.kb=$p.up_total=,\\ KB\\ ,$convert.kb=$p.down_total=,\\ KB"));
element->set_column_width(element->column_width() + 1);
- element->set_error_handler(new display::TextElementCString("No peer selected."));
+ element->set_error_handler(new display::TextElementCString("no peer selected."));
return element;
enjoy !!

a screenshot !!

[svn:fx-trunk] 9578: Found another embeddedfontcontext issue in the player.

Revision: 9578
Author:   [email protected]
Date:     2009-08-25 10:23:52 -0700 (Tue, 25 Aug 2009)
Log Message:
Found another embeddedfontcontext issue in the player. ElementFormat.getFontMetrics() must be called in the embeddedFont's moduleFactory context. Added a general "callInContext" API to IFLexModuleFactory. Eventually, TLF will add a new API so they can connect up to this capability and we'll change the code one more time.
QE Notes: None
Doc Notes: New API in IFlexModuleFactory.as
Bugs: SDK-22159
Reviewer: Darrell
API Change: Yes
Is noteworthy for integration: No
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22159
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/FlexModuleFactory.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/IFlexModuleFactory.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/SimpleText.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

Updates:
I've opened a bug with Adobe regarding this issue:
http://bugs.adobe.com/jira/browse/FP-4362
Also, the Cancel operation on a FileReference causes the same issue to happen as does loading. I really think it's an operating system focus issue.
UPDATE:
Looks like this has already been tracked and is scheduled to be fixed:
https://bugs.adobe.com/jira/browse/FP-2785

How to calculate Min & Max temperature with just air temperature

Hi Gurus,
I have a requirement in which I have to build a Bex Query in which I have to find the Min & Max temperature of a day if a specific date range is used in the query.I have checked the multiprovider and there is only one field available
which is "Air temperature" and it's a KF. I have built a query which will give you the temperature for the day if you give a particular date range.
My question is,is it possible for me to find the min and max temperature with just air temperature as input?
Please let me know your thoughts.
Thanks,
Raj

Hi,
You have to create two KFs for Min and Max temperatures,
In Min Temp KF definition, Aggregation Tab-->Minimum--> reference char as 0calday
In Max Temp KF definition, Aggregation tab-->Maximum-->Reference char as 0calday
Regards,
Suman

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

Try these solutions: Error "Licensing has stopped working" | Mac OS

Hi All. My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.

Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

Complete iPhoto event of daughter's prom gone. Happened during iPhone 3 synch to mac air. No mojo, no weird key strokes, just another ordinary sync. Event gone. Apple no resolution.

Complete iPhoto event of daughter's prom gone. Happened during iPhone 3 synch to mac air. No mojo, no weird key strokes, just another ordinary sync. Event gone. Apple no resolution.

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
were the prom pictures on the iPhone 3 to begin with?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

TS1420 I have purchased a song. Just another day by Jon secada and it won't play

I Purchased Jon secada ..just another day and it won't play.

Delete it, and redownload it through past purchases. http://support.apple.com/kb/ht2519

Just Another insert language here Hacker,

This is fun! Here is a chance to showoff your skills. Of course you can choose whatever language you want.
Just another Perl hacker, or JAPH, typically refers to a Perl program which prints "Just another Perl hacker," (the comma is canonical but is occasionally omitted). Short JAPH programs are often used as signatures in online forums, or as T-shirt designs. The phrase or acronym is also occasionally used (without code) for a signature.
JAPH programs are classically done using extremely obfuscated methods, in the spirit of the Obfuscated C Contest. More recently, as the phenomenon has become so well known, the phrase is sometimes used in ordinary examples (without obfuscation). Even more recently the P of JAPH can also stand for Perl 6, Parrot or Pugs.
Starting easy...
Perl:
$c='python';$_=`printf hack`;$_=~s;ck;;;;$c=~s%^(?!\x68)(.)(?2)(?1)(.)(?1)(?2)(?<!.{4}h)$%$2%;print j.substr($_,1),p,$c.','
Let's go obfuscating!

Wow, way to completely miss the point guys...
linas wrote:
It's an interesting code, cmtptr, since it seems to expose a bug in strace.
Stracing it shows:
stat(NULL, Just another ASM hacker,
NULL) = 25
write(0, NULL, 25 <unfinished ... exit status 0>
The string "Just another ASM hacker,\n" is 4A 75 73 74 20 61 6E 6F 74 68 65 72 20 41 53 4D 20 68 61 63 6B 65 72 2C 0A
which takes the last to lines of words.
If we disassemble the first two lines (gdb ./a.out, disas /r _start):
0x0000000000400078 <_start+0>: ba 19 00 00 00 mov $0x19,%edx
0x000000000040007d <_start+5>: b9 98 00 40 00 mov $0x400098,%ecx
0x0000000000400082 <_start+10>: bb 01 00 00 00 mov $0x1,%ebx
0x0000000000400087 <_start+15>: b8 04 00 00 00 mov $0x4,%eax
0x000000000040008c <_start+20>: cd 80 int $0x80
0x000000000040008e <_start+22>: 31 db xor %ebx,%ebx
0x0000000000400090 <_start+24>: b8 01 00 00 00 mov $0x1,%eax
0x0000000000400095 <_start+29>: cd 80 int $0x80
0x0000000000400097 <_start+31>: c3 retq
0x0000000000400098 <begin of the text>
That's a syscall 4 (__NR_write), with parameters 1 (write to stdout), 0x400098 (address if the text) and 25 (text length).
Finally it calls syscall 1 with parameter 0, ie. _exit(0).
That's using linux32 syscalls (<asm/unistd_32.h>), but with 64 bits syscalls (<asm/unistd_64.h>) syscall 4 is stat and syscall 1 is write. Which matches what strace tried to output.
$ file a.out
a.out: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, not stripped
So the kernel manages to correctly run it even though it uses 32 bit syscalls (because it isn't using a x86-64 interface?) but strace doesn't notice it and shows the 64 bit functions.
It took me a few reads and some experimenting/investigating before I understood what you were getting at, since I'm admittedly new to the 64-bit world.
The code I wrote works because I'm invoking interrupt 0x80, while the 64-bit syscalls you (and strace) wanted to see are invoked using the "syscall" instruction (I suppose this is what you meant when you said it isn't using the x86-64 interface?). I suppose my code should have been...
[corey@sariss ~]$ cat asm.s
.text
.globl _start
_start:
.word 0xc748,0x19c2,0x0000,0x4800,0xc6c7,0x00a3,0x0040,0xc748
.word 0x01c7,0x0000,0x4800,0xc0c7,0x0001,0x0000,0x050f,0x3148
.word 0x48ff,0xc0c7,0x003c,0x0000,0x050f,0x4ac3,0x7375,0x2074
.word 0x6e61,0x746f,0x6568,0x2072,0x5341,0x204d,0x6168,0x6b63
.word 0x7265,0x0a2c
[corey@sariss ~]$ as -o asm.o asm.s && ld asm.o
[corey@sariss ~]$ ./a.out
Just another ASM hacker,
[corey@sariss ~]$ strace ./a.out
execve("./a.out", ["./a.out"], [/* 46 vars */]) = 0
write(1, "Just another ASM hacker,\n", 25Just another ASM hacker,
) = 25
_exit(0) = ?
[corey@sariss ~]$
Thanks for pointing that out. You caused me to learn something!
And you're right, that does appear to be a bug in strace!
Last edited by cmtptr (2010-03-08 01:05:29)

Just Another N97 Major Issue ..

Here's Another issue in the Awesome N97 ... I left it recording a Video for like 22 min , then I pressed Stop .. It then
said " Processing " .. then .... TADAAA .. Nothing .. came back to camera View .. No Captured Video was there or even processed
Lovely Phone :/
Lens Scratch - Freeze After Phone Calls - SLOW - Self Restart -5MP Camera is Nowhere Near the Sonyericsson 3.2 Awesome camera -Vibrating issues - Mass Storage issues - & the list Goes On & On ..
This Device Does EVERYTHING that you dont want it to do for 620 $
I WILL NEVER GET 1 INCH close to a Nokia Device .
Thank You for wasting my Time & Money .
N97 .. Working or Not , it's still a *bleeing* Rip OFF .

I wouldn't recommend the N97 to anyone because it doesn't do what it says it does on the tin. It's the worse phone I have ever had and I've gone and tied myself in a 2 your contract so I better learn to live with it.
My handset constantly crashes (I would say a few times a week) it can be when a call is coming through to my phone. The only way to get it working again is to switch it off and reseat the battery. On a couple of ocassions it hasn't come back on and I've had to leave it and retry it and eventually I've been able to switch it back on.
My phone crashed this week and I got some sort of memory error (yes on a device that has 32GB internal memory and I have a 16GB memory card). I went into the file manager and noticed that the phone memory was low. I managed between clearing memory errors to get into some settings and changed the save location to mass memory and memory card.
Prior to the crashing I had a problem with the phone not holding the charge, luckily when I took it back to the Phone4U shop the assistant tested the charger on another N97 had the same problem so swapped the faulty charger for a new one.
Another weird thing my N97 does is that although I have a default ring tone set the phone intermittently rings with a different tone.
The BBC iPlayer doesn't work, well that's not strictly true I can get to it but every single TV show I try to view comes up with "Sorry, but to play to BBC iPlayer programmes you need to switch to a WIFI connection". So I exit BBC iPlayer and connect to the WIFI and then go back into BBC iPlayer and it still comes up with the same WIFI message.
Oh and yes I recently updated the firmware... and guess what it didn't make a blind bit of difference.
Nokia I challenge you to sort my N97 within the next 2 weeks and if not you provide me with a phone up to the same value from your Nokia store.

Just another temperature issue

Similar Messages

Maybe you are looking for