Just bought nano 6th gen, it won't turn in all directions, I have a wrist band for it, but the display only turns in two directions, not all 4. What do I need to do?
I just bought an iPod nano 6th gen. I bought one earlier and returned it bc of the same problem. So I am thinking there is something I have missed. It's advertised to turn with you no matter which way you turn the nano. Mine only turns up or down. I have a wrist band so I can wear it as a watch, but I have to hold my wrist funny to read it bc it doesn't turn like a normal watch would be facing. Please help!
Using two fingers, you can rotate the screen on the Nano 6th Generation in any direction you wish.
http://www.youtube.com/watch?v=zq3tKK4Qg-U
i
Similar Messages
-
I just bought "print n share pro" app and it dosen't seem to find our printer on our wifi network (a non-wireless HP printer attached to HP PC). What do I need to do to set this up?
I can only tell you that I had a couple of apps that worked perfect before but when ios 5.0.1, apple closed whatever way the apps used to print....Print Central was one....the developer. at least this one, said they could not do anything about it...they only recommended printing to PDF...
But I have a dedicated file server ( steream music and movies ) and I installed FINGERPRINT on my server and now I can print from my ipad, iphone to any printer on my server -
We were watching a movie from iTunes on our Apple TV and it froze with about 10 minutes left... just a spinning disk. Network was fine, I could run Netflix, I could choose other content via AppleTV or iTunes... but the movie only gives spinning disk when I go back to it. I confirmed settings on AppleTV and reset the unit without any result. iTunes indicates I have 21 hours left on the rental. I would like to be able to finish the movie and not have to rent it again.
Any thoughts? Anything that needs to be done in Samsung TV settings?How did you verify network was fine?
Netflix adapts to the network whereas iTunes needs a consistently solid connection. What other content did you try?
What is your current connection via speedtest
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network
Make sure DNS is set to automatic. -
Error 13019 iPod nano 6th gen. I manually manage my music and I have tried literally everything.
Ok Apple people, you better give me some customer service.
I am getting this error message whenever my iPod needs to sync after i try to click/drag to add songs or delete something. I see the songs I'm trying to add in the "Music" section of my device on iTunes, but they are not on the actual iPod. I have reset my iPod, restarted my computer, waited a few days, downloaded the new version of iTunes, uninstalled and redownloaded it, tried using another computer account, and i really, really do not want to have to restore it because that is just dumb and i'm sure there's some other way to fix it. I have never had voiceover activated, and i don't automatically sync it. I have windows 7, if that helps.
Seriously Apple? What happened to user friendly? NOTHING is working. I have usually been able to fix iTunes problems in the past by myself and I'm pretty knowledgeable about it. But this has got me at the end of my rope, so help me. Now.Ok update, I tried my sister's iPod touch 4th gen and it syncs perfectly. I guess I'll just have to restore.
-
Nano 6th gen audio is warbled...any fix?
Nano 6th gen audio is warbled...any fix?
Have you tried a different set of headphones? Have you tried any of the standard troubleshooting techniques such as a reset or restore of the Nano?
Does this happen with all the tracks? It could be a hardware issue with the headphone jack, in which case you should bring it into your local Apple store/Genius bar and see what they can do for you.
B-rock -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
My ipod nano 6th Gen. bought 5th Jan 2011 suddenly cannot be switched on. Last use is just 3h ago and everything went perfect til then Even shows no reaction when connected to charging cable. Anyone who can help?
See the Will not turn or screen remains dark section of this Apple support document to start troubleshooting the issue.
iPod nano (6th generation): Hardware troubleshooting
B-rock -
IPod nano 6th gen won't play my music.
My iPod nano 6th gen has worked fine for years and when I synced it recently it would play some tunes fine, cut some off mid-way through and skip some completely. The first thing I done was just tried to sync it again but this didn't make a difference so I reset my iPod through iTunes and synced it again but this made it worse, when I pressed play it comes up with the pause button but if I go to the next screen where you can see how far through the song is the bar wasn't moving, so the tunes aren't playing, so following this I formatted my iPod on my pc and then reset it on iTunes (I had to replace the folders I had removed during formatting) and that didn't do anything it still won't play anything. It's not my headphones as they work fine in my pc, and it's not my music as it worked fine before and they all play fine on my pc. What else can I do?
What do you mean by select tracks? It will only play particular tracks or repeatedly play a particular track? What format are these problem tracks in?
B-rock -
IPod Nano 6th gen won't sync with iTunes 12.1.1.4
iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
Any suggestions would be appreciated.What solved my problem:
I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
Additional details:
I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery. -
i have recently recieved an ipod nano 6th gen after the 1st gen recall, and out of nowhere it just started flashing the apple logo when connected to computer. Help please!
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please
Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk? It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks -
Ipod Nano 6th Gen damaged Apple won't repair...any options?
I have had my Ipod Nano 6th gen for about 8 months and used it religiously during work outs...unfortunately I sweat a lot and apparently this will damage Ipod Nano to the point that Apple considers this to be outside the guidelines of normal manufacturer warranty. I am a little frustrated by this as I spend a fair amount of money on Apple products every year. Any advice on what I can do other than just sell it as damaged on eBay?
The best thing to do is consult Genius Bar. But as you have already said Apple does not honor the cause of damage and therefore not eligible for replacement. I recommend to visit an apple technical support to confirm the initial assessment.
You can try the out-of-warranty repair and determine how much it will cost you to repair. But try to weigh in cost of repair vs. a new replacement. Here is apple's statement about out-of-warranty repair.
If you want to set up your iPod for the Out-of-warranty service, we recommend that you take your iPod to a local Apple Retail Store. Alternatively, you can contact Apple Technical Support.
For more details, please refer to the Repair Pricing tab on the left.
If Apple determines that an iPod is not repairable, for example, if it has failed due catastrophic damage or the iPod has been disassembled into multiple pieces, then Out-of-Warranty Service is not available and the iPod will be returned. Please see Apple's Repair Terms And Conditions for further details. -
IPod Nano 6th Gen needs a restore every day...?
My iPod Nano 6th Gen works well for arond 24 hours but every morning when i wake up it says it needs to be restored using iTuunes.
When I restore it, it works perfectly. No problems at all. I can fill it to capacity with music and it works all day. The next morning, the battery is still really close to fully charged, but the iPod is in recovery mode. I've scoured the internet but haven't found anyone with a similar problem.
Generally, I've read about iPods that will not restore, or that, even after a restore, will remain in recovery mode, which is indicative of moisture or some other malady.
This Nano has been well cared for and is in flawless condition in every way aside from the condition mentioned. Not even a scratch or smudge. I'm baffled.
Has anyone experienced a similar problem? I love to use the smaller ipod when running or bike riding, but am stuck restoring it each day I choose to use it over my Classic 160's.
Any help is appreciated.Ok, here is a bit of an update on the issue.
For the last two mornings, when the Nano says it needs a restore, I've hard reset it (holding down both the select/menu and volume down button simultaneously), then, when the apple logo shows, I held down the menu and the volume up button simultaneously, which then restores the ipod back to functioning properly (I think I read that this is supposed to put the ipod into disk mode, which it doesn't do on this Nano, obviously).
Aside from being annoying as all get up, I suppose the ipod is working, so it's a minor victory.
Still, does anyone know why this might be happening every single night? The battery is still completely charged and once I do the aforementioned sequence, the ipod works perfectly until the next day. -
i rencently bought an ipod nano 6th gen and its an 16gb but it doesnt let download much music as it suppose to and only have about 353 songs and i dont have any files on others.what should i do
How many songs it will hold depends on the format and length of the songs.
-
I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?
Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i
Maybe you are looking for
-
Computer shuts down when I connect my Ipod Touch to it.
Each time I go to connect my Ipod touch to my computer, I get the blue screen of death appear on my computer with a huge error message and then it shuts down, 'To protect itself' I have tried to connect my Ipod Nano and thats fine, works no problems.
-
Problem in triggering abap program in process chain
i m running a infopackage in a process chain . this infopackage creates the request in the DSO . after infopackage i m including the abap program to delete the same request in the process chain . but the abap program is not getting triggered .i have
-
Table-fields for monthly attendence
hi can any one tell me in which table i can get monthly attendence like present 20 days CL : 2 days EL : 1 days IWP: 1 days
-
Hi everybody, I'm newby in all of this, i mean SAP, i do some things in PI, but now i need to work with Business Objects, and i really don't have idea. I was looking for information about it but i didn't find something that explain what is business o
-
Landscape Issue AccAD 2.2 (Federated Portals)
Hello, I have a performance issue, I have CE 7.2 and EP 7.0. Both are integrated as a Federated Portal. The CE 7.2 is the producer and EP 7.0 is the consumer or front end to our employees. We have remote locations with low bandwiths so we implemented