Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptabl

Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptable

What version of iTunes is on the computer? You need at least 11.4.

Similar Messages

  • I just bought new iPhone 5 - when I try to reply to e-mail my tool bar at bottom with "reply, forward, delete..." is not there!  Why? How can I reactivate it?

    I just bought new iPhone 5 - when I try to reply to e-mail my tool bar at bottom with "reply, forward, delete..." is not there!  Why? How can I reactivate it?

    Submit suggestions to Apple at http://www.apple.com/feedback/iphone.html

  • Just bought new Mac pro  when I sync my iPhone 4 i lost all my contacts on the phone .tried restoring from backup  no luck .is there any way I can retrieve my contacts

    Just bought new Mac pro  when I sync my iPhone 4 i lost all my contacts on the phone .tried restoring from backup  no luck .is there any way I can retrieve my contacts

    Why don't you just restore the to your pc from your most recent backup? You'll get the warning about erasing the media on the phone, but since you'll have all of your media and apps restored from backup, you shouldn't have much of a problem.

  • Just bought new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I have my hand on the mouse. I can get back to normal size by clicking "actual size" in View. What gives?

    Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?

    From System Preferences, Mouse, Point & Click, Secondary click.  Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.

  • Hi everyone i have just bought new Ipod touch 32 GB and upgraded to 5.0.1 and it it worse now my battery doesn't last long for more then hvvour. what should i do?

    Hi everyone,
    I have just bought new Ipod touch 32 GB and upgraded to 5.0.1 and it it worse now my battery doesn't last for more then two hour.
    what should i do? it is seriously big problem.
    Please help me.......

    This is a general comment, not directed to anyone, and not to be taken personally by anyone.  This ongoing screw up with the new upgrade (5.0.1) is getting to be a **** SHAME.  In no way can APPLE or anyone else for that matter not know by now that the upgrade is terribly flawed.  The Ipod machines themselves are super great products, and I enjoy mine to the max.  However the upgrade once applied ruins it.   And at least, not to my current knowledge,  there haven't been any fixes forcoming. 
       In my opinion Apple should own up to that fact and warn folks that, even though the upgrade was presented with the best intentions, IT JUST AIN"T WORKING.  And not to download it until further  notice. This noticication could be done through the retail sales outlet, online, what ever.
      I liken this to a pharmaceutical coming out with a new vaccine, encourage everyone to use it, then discover it's bad to the degree it causes it uses to become sick.  Rather then pull the vaccine they keep on allowing unsuspecting ones to continue to vaccinate, and become sick.  What a shame!
    Charlie Lee 

  • HT1695 Hi. I just bought new Ipad Mini. I don't have network to connect to. Its my first owning one i don't know how to set it up. Help...

    Hi. I just bought new Ipad Mini. I don't have network to connect to. Its my first owning one i don't know how to set it up. Help...

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in.  We have tried multiple usb ports and nothing.

    Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in.  We have tried multiple usb ports and nothing.

    Hello csmithhisler,
    Congratulations on your new iPhone 5c!  I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone or iPad.

    Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?

    Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
    Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
    Elsewhere: call the phone number in the Apple Online Store
    Apple's price is $19.99, £14.00, €18.

  • Just bought new battery charged it and the mac finds it but can't start it without charger and when i remove charger in os it dies right away what to do???

    Just bought New battery charged it and the mac finds it but can't start it without charger and when i remove charger in os it dies right away what to do???
    Here´s some info:
    Macbook Pro 2008 (Early)
    Lion
    Some INFO from power in about mac
    It´s Danish hope you can understand the info
    Batterioplysninger:
      Modeloplysninger:
      Serienummer:
      Producent:          SMP
      Enhedsnavn:          ASMB012
      Pack Lot Code:          a0b0
      PCB Lot Code:          c0f1
      Firmware-version:          8800
      Hardwarerevision:          0
      Cellerevision:          0
      Oplysninger om batterispænding:
      Resterende kapacitet (mAh):          5200
      Fuldt opladt:          Ja
      Oplader:          Nej
      Fuld ladekapacitet (mAh):          5200
      Oplysninger om batteritilstand:
      Antal cykler:          1
      Betingelse:          Normal
      Batteri installeret:          Ja
      Strømstyrke (mA):          0
      Spænding (mV):          11796
    Energiindstillinger til system:
      AC-strømforsyning:
      Interval for vågeblus for system (minutter):          30
      Interval for vågeblus for disk (minutter):          10
      Interval for vågeblus for skærm (minutter):          10
      Genstart automatisk efter strømafbrydelse:          Nej
      Afbryd vågeblus ved ændret spændingskilde:          Nej
      Afbryd vågeblus, når skærmen slås op:          Ja
      Afbryd vågeblus via LAN:          Ja
      Aktuel strømkilde:          Ja
      Vågeblus dæmper lysstyrken:          Ja
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Batteri:
      Interval for vågeblus for system (minutter):          10
      Interval for vågeblus for disk (minutter):          10
      Interval for vågeblus for skærm (minutter):          2
      Afbryd vågeblus ved ændret spændingskilde:          Nej
      Afbryd vågeblus, når skærmen slås op:          Ja
      Vågeblus dæmper lysstyrken:          Ja
      Formindsk lysstyrke:          Ja
      RestartAfterKernelPanic:          157680000
    Hardwarekonfiguration:
      UPS installeret:          Nej
    Oplysninger om oplader:
      Tilsluttet:          Ja
      Id:          0x0100
      Watt (W):          85
      Revision:          0x0000
      Familie:          0x00ba
      Serienummer:          0x004fe0c9
      Oplader:          Nej

    Take it to an Apple Genius Bar to be checked out. It will either be the battery or the Logic board (not sure the charging circuit is a separate part. If it is then it mya be just that part).
    If logic board just use it plugged in as for the cost of changing out the logic board you can buy a new system.

  • I just bought new computer and redownloaded itunes. Will it erase everything on my iphone when plug into the new computer?

    I just bought new computer and redownloaded itunes. Will it erase everything on my iphone when plug into the new computer?

    Yes, it will.
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Any luck with the suggestions mentioned by Bob Timmons?
    I am having pretty much the same issue.
    Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
    I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
    -Reset the airport extreme
    -Unplug the modem for 30min
    Airport Utility 6.3.4 (634.17)
    Airport Extreme ME918LL/A Firmware Version 7.7.3
    MBP - Yosemite Mid 2012
    Appreciate the assistance folks.

  • Just bought new Palm and not sure how to set it up best to sync

    I just bought a new Palm TX. The manual says to connect the sync cable to palm and to computer usb port and connect a/c adapter to palm and an outlet and charge for 3 hrs which I'm getting ready to do. Before I start setting up my whole system I to am trying to determine a couple of things first.
    Based on all forums I've read today, I want to use the missing sync with ical and address book rather than palm desktop. I also plan to sync using bluetooth rather than usb. (My goal plan is to use this set up to digitally implement kgtd - so the categories issue is key for me).
    Thus I wonder, is there any reason to insert the palm desktop software cd and/or install isync palm conduit. It seems missing sync 5.x replaces isync palm conduit and installation of the missing sync will remove the isync palm conduit anyway.
    Is there anything I will possibly miss with palm functionalities if I don't use that CD first and then switch to missing sync? Are there any pros or cons to loading isync palm conduit and Palm hotsync software and then switching almost immediately to missing synch with ical and address book. I guess what I'm wondering is, are there anything from the CD that I need or downloads or updates that I initially need to get that I can't get without new palm software installed initially rather than only having the missing sync installed.
    On the other hand, are there benefits in immediately installing missing sync and not bothering with mucking things up with the new isync palm conduit and palm hotsync being on my system.
    I seem to have isync 2.3 automatically from 10.4.8. I am afraid to, at least initially, upgrade to 10.4.9 given the many problems that seem to be reported from the upgrade regarding syncing and I have very little in ical or address book as of yet and an old palm desktop 4.2.1 that I haaven't used in over a year. I am not interested at this point in transfering anything from the old palm desktop (not so much there either and none of it current) although would be interested in (unless told it could cause other problems for me or be in any way suboptimal) keeping it as a sort of archive.
    Also, why do I need to connect the USB port while doing the initial charge if the plan is to use bluetooth? Any pros or cons in doing/ not doing this - both using bluetooth and connecting the USB cable during the initial charge?
    Any guidance on some or all of these things would be greatly appreciated.
    iBookG4   Mac OS X (10.4.8)   palm tx
    iBookG4   Mac OS X (10.4.8)   palm tx

    Welcome to Apple Discussions.
    Great questions, and we'll attack them one at a time.
    Q: '…is there any reason to insert the Palm Desktop software CD and install the iSync Palm Conduit?'
    A: Actually, yes - there is. Mark/Space very strongly recommends that you perform one last synchronization event with the Address Book and iCal using iSync and the iSync Palm Conduit prior to installing and configuring the Missing Sync. It is therefore necessary that you synchronize using iSync and the iSync Palm Conduit at least once prior to your initial use of the Missing Sync for Palm OS, and iSync and the iSync Palm Conduit require that the HotSync Manager and Transport Monitor—components of the Palm Desktop—be installed in order for iSync to launch, supervise and terminate a synchronization session with a Palm device.
    Q: '… are there benefits in immediately installing the Missing Sync and not bothering with… …the new iSync Palm Conduit and Palm HotSync…'
    A: No. It is critical that you overwrite the contents of your Palm device with data from the Address Book and iCal during the first synchronization event with the Missing Sync for Palm OS. Absolutely critical. Users who skip this required step always end up with synchronization problems later. In order to do that, you have to have first equalized the contents of the Address Book and iCal with the contents of your Palm device. Otherwise, you'll be overwriting the device with empty record sets. The easiest way to equalize them is to synchronize at least once using iSync and the iSync Palm Conduit. Because the iSync Palm Conduit does not support categories, all field labels and extended attributes supported by both the Missing Sync for Palm OS and your device, you'll have some record cleanup tasks to perform as a result. But, don't skip that initial device overwrite requirement, or you'll put your data at serious risk and only spend much more time later on cleaning up the resulting mess.
    Q: 'I am afraid to, at least initially, upgrade to 10.4.9…'
    A: Don't be, though it makes little difference if you apply update before initiating the iSync synchronization, or afterward. You indicated that you have an old copy of Palm Desktop installed which you haven't used for more than a year. If that copy is not as recent as the once bundled on your CD-ROM, then install the CD-ROM copy. If they are the same version, or are different versions but neither are Palm Desktop 4.2.1 revision D, then download and install that package before configuring and using iSync. The package is available here:
    http://www.palm.com/us/support/macintosh/macdesk421revd.html
    If you aren't sure, then install this downloadable package, as it can only improve and not damage your currently installed Palm Desktop configuration.
    Q: '…why do I need to connect the USB port while doing the initial charge if the plan is to use Bluetooth?'
    You don't, although your device can obviously only charge with a USB-powered cable or cradle, or an AC adapter-powered cradle. I recommend that you initially configure it to synchronize via USB with both iSync and then with the Missing Sync for Palm OS, and then pair it using Bluetooth and synchronize using that pathway if you wish. Remember two things: while Bluetooth may be more convenient, USB moves substantially greater data in a shorter period of time—important during slow, initial synchronization events—and, the Missing Sync for Palm OS also supports network synchronization with your T|X, using it's WiFi capability. Initially using USB, later reconfiguring for Bluetooth and then for WiFi gives you literally one-button choices when using the Missing Sync for Palm OS.
    In summary, you ought to…
    • update the Palm Desktop suite to 4.2.1 revision D using the downloadable package
    • add your device to iSync via USB using the Enable Palm OS Syncing… option under the iSync Devices menu
    • be sure to change the label of any contact address you want synchronized to <home>, as iSync ignores addresses not labeled that way
    • merge the data in the Address Book and iCal with your Palm Device
    • back up the Address Book data using the Back up Address Book… option in that application
    • back up your iCal data using the Back up Database… option in that application
    • install and configure the Missing Sync for Palm OS
    • set your three Mark/Space conduits initially to overwrite your handheld with data from your computer
    • synchronize initially via USB and include the TimeCopy conduit in this effort
    • follow the Bluetooth wizard instructions in the Missing Sync to pair your device and add the Bluetooth option
    • follow the network wizard instructions enable WiFi synchronization
    • create sets of conduits appropriate for your workflow, and associate them with an interface: USB, Bluetooth or network
    • correct your handheld data to reflect address data field label changes, calendar and contact categories, and so on
    • synchronize again via any chose interface to propagate the corrected data

  • I have a nano 5th gen bought new. I no longer have the computer that I registered it w and created music library on. I want to allow my new computer and itunes to sync w my nano w/o losing the music on it. When I try it tells me i

    I have a nano 5th gen which I bought new. I no longer have the computer that I sync'd it with and created library on. I have new computer and Itunes library which I want to sync w my nano and songs on it. When I try it tells me I will loose all the songs on my nano bc Im already sync'd on a dif library. How do I keep from loosing all my songs?

    Your iPod is designed to sync with only one iTunes library at a time.  If you try to sync it with a new or different iTunes library, it will erase what is currently on the iPod and replace it with what is in the new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Error message "The currently attached accessory is not supported by this iPod" is shown when connected to my Zeppelin Air Dock.

    I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this iPod"
    I have updated the firmware on the Zeppelin and have the latest updates on each of the iPods.
    The Zeppelin works fine and connects to the computer and laptop without issues.

    I'm having the same problem, it just started today. I've been running w/ the nike+ sensor and receive w/ my iPod nano for 6 months, logging 75 runs, so don't understand why I'm getting this error now.
    Can someone please reply w/ how to resolve this issue? I have Nike+ challenges coming up soon that I can't miss. Thanks!

Maybe you are looking for

  • Using my Australian iPhone 3GS in Canada

    Hi there, I recently moved from Australia to Canada. I took my iPhone 3GS and today called Vodafone to officially cancel my service with them. This has since been done, and I also sought advice from them on how to use my phone with a Canadian provide

  • License requirements question

    All, I have the following question (stranger question): I just developed a SimpleMap class which is an equivalent of the HashMap from java.util, but very specialized with respect to some special uses cases I am dealing with. There is no dependency be

  • Create Release strategy for PR

    Dear experts, We have one class FRG_EBAN for PR release strategy and there are 5 characteristics in that class. Now i need to create a rel. strategy with 4 characteristics . Can i create a new class for PR release strategy? Please help. Thank you Kin

  • Can't get error message to stop appearing, missing font...

    I just updated to osx 10.5, and ilife 09 at the same time. I'm working in iWeb, and my previous sites have imported fine, and are uploading great, but I keep getting a message that I'm missing a font. Every time I click on a different page in my site

  • Enquiry about payment

    Hi, I have a membership from 3-12-13 and every month you charge me £15.88, but last payment (12-12-14) you charge me £22.46. So, I would ask why you charge me more than usual?