Just bought this hard drive..

..and now just realised I don't think it's SATA! Will this work?
http://www.ciao.co.uk/SeagateMomentus_5400_3_ST9160821A_160_GB__Review5633758

The first drive will never work in an internal MB installation. It has the wrong connectors.
The second drive is SATA and will work fine.
Just look for a 2.5" SATA notebook style drive. PATA, IDE, ATA, or any other type of drive will never work.

Similar Messages

  • Just bought External hard drive case I need an adapter

    I replaced the old harddrive in my HP Pavilion ze4900, laptop. This was an IDE type but I had to remove an adapter / plug with male pins from the old to install the new. Both hard drives had only a male flat buss type slot arrangement.
    Since the old drive was usable I ordered an external IDE with USB power and transfer plugs. However the units came with IDE pin HOLES so I need to find an economical adapter to attached to the hard drive which will give me the needed IDE pins and female slots to fit the HD.
    Can I get some direction where I can buy this or any alternatives?
    Thank you in advance!

    I think this may take pictures for me to see what you are talking about. What do you want to convert/adapt to what? If you have a SATA hard drive like this:
    There is no adapter to convert it to an IDE (PATA) like this:
     Just guessing the only thing I can think you might mean is that you have an external adapter made for a desktop type drive so you need to adapt the 2.5 inch laptop drive to a full-sized IDE connection. Yes, these types of adapters are dirt cheap and readily available:
    2.5 to 3.5 adapter
    As you can see that allows connection of the big ide female cable to a laptop drive and also adapts the molex power connection. And they cost about a buck. At Frys it might be 3 bucks.

  • I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    No easy fix for a few reasons:
    1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
    2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
    I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
    Win7 x64 booting natively via EFI (no bios emulation)
    Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
    My recomendations:
    1) Install on a second smaller hard-drive; or
    2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
    3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

  • I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

    I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

    Prep the new drive:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

  • Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.

    Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.

    Reinstall them from your original install disks or your backup.

  • HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
    Then, install OS X.

  • Will this hard drive work on a T43?

    My T43 hard drive (Fujitsu MHV2060AH) went kaput.I bought a new one, a 120Gb WD drive, just to find out T43s have a very limited list of hard drives they like. So now I have to return this drive.
    So, I can't find my old hard drive model, but I found a similar one on newegg - Fujitsu MHV2060AT (http://is.gd/rFl8).
    Does anyone know if this hard drive will work on my T43?
    Thanks!
    Bernardo

    When you said that it will not work with your T43 do you mean that you bought a SATA HDD rather than an IDE? If you have an IDE and you are just getting the ERROR 2010, saying that your HDD is not supported and that you might need to update the firmware or something, you don't have to worry, as it should still work. You will just have to decide whether you can stand the error message everytime you boot. I really doubt you will be able to find the old supported HDDs for the T43.
    T60-2GB RAM-320HDD- XP PRO SP3 || Dell D620-2.5GB RAM-320GB HDD-XP PRO SP3

  • Will this hard drive work with my macbook?

    I have a late 2006 Core Duo Macbook. I was wondering if I could use this hard drive with my macbook, it's a 7200 rpm 200 gig hard drive. Btw I mean internal not external. Does the macbook have a limit on how big of a hard drive you can use? Would this hard drive work at 7200 rpm in the macbook?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145160

    Hi.
    The drive will work perfectly in your macbook. Two weeks ago i was also thinking about buying the Hitachi Travelstar 7k200.
    But afterwards i bought this one:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822136123
    The WD Scorpio 250GB. Off course it´s not as fast as the Travelstar. But for me three things we´re quiet nice about this harddrive: the noise (it doesn´t make anyone) and the price (got it for 150 euro) and it consumes way less power (means better battery life).
    http://www.storagereview.com/WD2500BEVS.sr?page=0%2C7
    BTW: It really doesn´t make any noise.
    So just in case you´re still unsure whether to buy the Hitachi or anything else. But if you want the fastest notebook HD you can get today, buy the Hitachi.
    Have a nice day and fun with your new HD!
    Message was edited by: dahack

  • I switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.

    i switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.
    I bought this off of craigslist with my christmas money, TODAY. i really need help, i have OS X experience from school, just not OS 9x. I need to reboot back to OS X asap. anything that may help is very appreciated. Thank You.
    Chris.

    Are you able to start up in Safe Mode?
    http://support.apple.com/kb/HT1455?viewlocale=en_US
    If this works you will see the normal desktop Once completely started up in Safe Mode, try to restart normally and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless it has been renamed). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do a little hard drive maintenance to help things out.

  • Can i use the time capsule as just an external hard drive for music or does it have to be used soley as a backe up?? im thinking for music and photos

    Can I use the time capsule as just an external hard drive for music or does it have to be used soley as a back up?  I'm thinking for music and photos

    Nickles96 wrote:
    Hello friends.. I have a similar question, in that I would like to purchase the 2TB TC for use as a NAS device, in addition to taking advantage of the Air Port extreme.. Then I could dump my Linksys router.
    I was originally looking at a Synology NAS solution, but the TC seems like it can meet my needs.
    I have a Synology NAS as well as the Time Capsule.  If you look at the 3.2 beta program, the Synology actually attempts to replicate TC functionality in that you can use it with Time Machine on your Mac.
    I must say, Airport on the TC is definitely a nice feature!
    Nickles96 wrote:
    In addition to the obvious feature of the backup, can I indeed also use the TC as a NAS drive to access from remote locations (example from the office)?
    I'm surprised more people aren't using the TC as a dedicated NAS deviced.. I've searched high and low on forums around the web, and don't seem to see many people trying to use it as I've outlined.
    I can't see why this wouldn't fufill my needs, and take the place of a separate NAS solution (like the Synology, or iOmega, Seagate, etc....)
    Has anyone used this TC as such?
    Yes, you can do this and it's something I've been trying to do, but I'm currently having issues.  I have another thread stating I consistently get "connection failed" messages.  I'm basically storing my music/photo/video files on the TC and keeping my Mac hard drive fairly lean.  In terms of NAS functionality, the TC is very basic.  Synology/QNAP and others have a lot more features so don't rule them out.

  • I just had my hard drive replaced and restored everything from a Time Machine external hard drive backup and now my "note" widgets won't load. Any ideas ?

    I just had my hard drive replaced. I restored it using a Time Machine backup on an external hard drive. When I open Dashboard none of my "note" widgets will load. The other widgets open, such as weather, weather radar, calculater, dictionary, stock...  Even the iPhoto Mini widget works, just not the notes ( Sticky Notes and K-Notes ).  Any ideas on how to fix this ?

    I did some research and found the solution to my problem. So I hope it's okay to answer my own question.
    When you reinstall the OS, your Preferences go back to their default settings. Apparently Preferences is where this widget information is stored. This Preferences folder is located in the user Library folder which is hidden by default. You can access it using "one, or the other" of the following actions.
    Action 1:      (1) In the Finder, choose Go > Go To Folder
                         (2) In the Go To Folder dialog, type ~/Library
                         (3) Click Go
                                                          -- OR --
    Action 2:     Hold down the option (alt) key when using the Go menu. The Library folder is listed just                            below the Home folder.
    After opening the Preferences folder, the file that you want to locate for k-notes is named
    widget-com.rakoth.lichlord.widget.k-notes.plist
    After you locate it make note of the byte size of the file. Now, with the Preferences folder still open, open Time Machine and go back in time until you see a big jump in the file size. That will be your uncorrupted plist. Restore it and close Time Machine.
    Then Restart your computer.
    After following this procedure I brought up Dashboard and my blank k-notes were now refilled with the previous text and color that occupied them before I had to restore the OS.
    This procedure also worked for Sticky notes, which in the Preference folder are named
    widget-com.apple.widget.stickies.plist

  • I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
    If you have another Mac, you may be able to use FireWire target disk mode.
    If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • Would this hard drive be compatible with a Compaq Presario CQ50-115NR?

    I'm wondering if this hard drive would fit in and be compatible with my laptop:
    http://www.wdc.com/en/products/products.asp?driveid=684
    I'm not sure if this 12mm, 2.5 inch drive would fit in it or be compatible with it. I plan to purchase this one if it is indeed compatible and will fit.
    Otherwise, if not, then can someone recommend another internal 750 GB SATA 3 Gb/s 8 MB Cache 5200 or 5400 hard drive for me that is just as good quality as Western Digital? Must be compatible and fit.
    Thanks and much appreciation in advance.

    Hmm... Can no one help?

  • Will this hard drive work with my Macbook Late 2009?

    Hello, I was wondering if this hard drive would work with my Macbook6,1: http://eshop.macsales.com/item/Toshiba/MQ01ABD100/

    Yes, it should work just fine.

Maybe you are looking for