Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?

Does your iPad see you network? If no, are you broadcasting its SSID?

Similar Messages

TS4002 Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?

Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

My ipod is displaying the itunes logo and a usb cord. I've tried reseting it but I can't get it so do anything!

My ipod is displaying the itunes logo and a usb cord. I've tried resetting it but it didn't work. Any suggestions?

Your in DFU mood do this:
iOS: Unable to update or restore
Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
Restarts but never displays the Home screen.
Is no longer recognized in iTunes after an update or restore did not complete.
Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Additional Information
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup.

Hi! I am stuck with my iPod, I have the 4th generation and I wanted to download the iOS7 but I accidently hit my iPod while doing homework and it discounted and stopped the whole process and now it says that I need to recover it but I can't recover it.

Hi! I am stuck with my iPod, I have the 4th generation and I wanted to download the iOS7 but I accidently hit my iPod while doing homework and it discounted and stopped the whole process and now it says that I need to recover it but I can't recover it. Please help me!

4th gen ipod cannot run ios 7 at all.
iOS: Unable to update or restore - Support - Apple

I recently update my iTunes and it deleted all my songs. I was able to get some back via iCloud but I can't seem to sync my old playlist. Any suggestions??

I recently update my iTunes and it deleted all my songs. I was able to get some back via iCloud but I can't seem to sync my old playlist. Any suggestions??

See Empty/corrupt library after upgrade/crash...
tt2

I forget my security answers and i tried to rest them by sending an email but, i can't get the email. What should i do?

I forget my security answers and i tried to rest them by sending an email but, i can't get the email. What should i do?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102411)

My pc is not recognising the iPad, I have tried reinstalling iTunes, it does not work. My computer is recognising a confection of some sort because it makes an audible sound. Any suggestions?

My pc does not recognise my iPad in iTunes. The pc is clearly recognising a connection of some sorts because when I connect the iPad it makes n audible sound. Any suggestions? I have tried all the usual reboots and reinstalling of iTunes.

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

I have a Sony Bravia KDL46W905 TV but I can't get it to connect the Airport Extreme router

My Sony Bravia KDL46W905 TV won't connect to my Airport Extreme router and the internet. It recognises and picks up my home wireless network though and I'm inputting the correct password but still won't connect. The router is set to WPA2 Personal.
Anyone any ideas?

While most devices should connect using WPA2 Personal, please temporarily test using no security to see if the Sony TV will connect that way.
If it will, then try the more compatible setting of WPA/WPA2 Personal on the AirPort Extreme and test that way.
However, if the TV will not connect using no wireless security.....then it is a no brainer to conclude that the TV will never connect with security enabled....so more troublehooting is going to be required.
In that case, make sure that the name of your wireless network......
Does not exceed 20 characters, fewer would be better
Does not contain any special characters like an apostrophe, asterisk, dollar sign, etc
Does not have any blank spaces
For example, if the current name of your wireless network is something like.....
rpepler's wireless network
Change that to read something like.....
rpeplerwireless
Same rules for the wireless network password

I have TV Programmes on my iMac but I can't get them on my iPad

Can anyone please hep with the above. I've downloaded 2 childrens episondes for my son on my iMac but despite syncing and having the box ticked for transfer to my iPad nothing appears. Going online I can see them in my 'purchased history' and despite downloading them again on my iPad they don't appear. Any help would be appreciated as this is driving me mad, they don't appear in Videos or anywhere that I can see.
Thanks,
T.

Hi oliverfromkings hill,
Thanks for visiting Apple Support Communities.
It sounds like you may have purchased TV shows on an iPod touch, and want to transfer them to the iTunes library on your Mac.
You can use the steps in this article to transfer purchases from your iPod to your computer:
iTunes Store: Transfer purchases from your iOS device or iPod to a computer
Best Regards,
Jeremy

HT1150 I have an iBook G4. My epson stylus printer is not fixable so I went to Best Buy and bought an XP400. It is all set up but I can't get the printer to communicate with the computer. Have tried everything I know and it won't work. Any ideas?

I have an iBook G4. My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson). When I went to set it up it wouldn't talk to my computer. So it looks great but won't print After 2 days and many phone calls I am disgruntled to say the least. Any suggestions?

I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
Download the older drivers for your OS here, and then try the install again.
Epson Print Drivers

I have 2 apps that say they need to be loaded on itunes or wi-fi because they are to big but I can not get them to delete on my ipad app screen they still say they are loading and I have deleted them on my itunes screen on my pc what do I need to do?

I have downloaded two apps that say they need to be downloaded on itunes on my pc or using wifi. I have deleted them from itunes on my pc but they still show on my apps screen on my ipad and I am unable to delte them on my ipad. what do I need to do to get them off my app screen on my ipad?

Also, and although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment as been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com www.getfirefox.com].

I just bought an IBook G4.. perfect condition, but I can not get it to connect to my wireless.

I just bought an IBook G4 in perfect condition, but I cannot get it to connect to my wireless. The IBook came with all the original cables, CDs, Books and packaging.., Like I said perfect condition. It was sold as having Airport Extreme, but I don't know how to make sure it is Airport Extreme.
I know the password is correct and the wireless system works on my other computers (PCs) . It picks up my wireless network, but I get a prompt that tellls me the password is not correct. I have set it to WAP... I tried WEP but was told it should be WAP... I even took it to my son's home this weekend and got the same results from his wireless connection.
Any suggestions would be appreciated

Sam,
Your iBook is younger than mine. I have an iBook G4. 800MHzPower PC G4 processor.256K level 2 cache. 256MB of DDR SDRAM; supports up to 640MB.
This unit did NOT have an AE card preinstalled. I purchased that at an Apple Store and they did the install for me. The iBook ran OS 10.3.3 out of the box. I know it was on the Internet via ABES g standard on a dial up AOL connection thanks to Tesserax on the Airport forum.
My iBook is now running 10.3.9. It was on the Internet with 10.3.4 mayb even 10.3.3. Can't remember. The only reason I went to 10.3.9 was for a printer istall.
We purchased an iBook G4 exactly like yours for a friend. There was a noticible speed bump on that one. I set it up for our friend and there was no difficulty getting on the Internet with it here at my home or his.
Have you been able to connect to the Internet at a hotspot? Just trying to cover all the bases.

Can't get dvd to import into imovie? Any suggestions?

I have my sister's wedding that a friend took for me on his camcorder, and burned to a dvd for me. But when I put the dvd in I am unable to save or anything and when I go to imovie and try to import it the best I get is files unrecognizable, but I'm not even sure I'm picking the right files. . .video is in NTSC. Any suggestions? Thanks!

// why not making use of the Search feature of this forum //
// following text is just copy/paste, no individual answer //
DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing... so, any conversion process will add a (dramatic) loss in picture quality.
for usage in iLife, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
DVDxDV (free trial, 25$, Pro: 90$)
Apple mpeg2 plugin (19$) + Streamclip (free)
VisualHub (23.32$)
Drop2DV (free, requires installation of ffmpeg parts, google for it...)
Toast 6/7/8/9 allows converting to dv/insert dvd, hit apple-k
connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
old apps:
Cinematize >60$
Mpeg2Works >25$ + Apple plug-in
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
http://karsten.schluter.googlepages.com/convertdvdstodvs
none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
+be nice to copyrights ...+

I can't get iMovie to export after update. Any suggestions?

I'm currently trying to export a 30 second video, and save it as a file. I've even tried exporting it directly to Vimeo, but nothing happens. Prior to the update, it exported fine, but now I can't get it to do anything. Any suggestions?

Hi Vincelrv,
Could you tell me how you solved this problem please?
I have the same..

I can't get CS6 to recognize R3D files. I put the plugin and the server files in the proper spot and I used 64 not 32 like it said. I still can't get it to work

The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.

I'm sad now
Good thing I have a PC with 32-bit windows!
Now, I can only assume apple is working on a 64-bit
fix? I suppose that info/ETA is on the itunes page,
I'll go take a look.
Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available.

Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

Similar Messages

Maybe you are looking for