Just cant get Cool'n'Quiet to work...

Hi
I have my computer in the same room as my bed so at night Cool'n'Quiet would be awsome but the thing is I can't get it to work and I don't get why 
I have done this
1. Enable Cool'n'Quiet in BIOS
2. Installed AMD Athlon 64 processor driver (tried 2 versions v1.1.0.0 that was on the mobo driver cd and v1.2.2.0)
3. In Power Options I have tried everything except for "Home/Office Desk" and "Always On" as it says in the Cool'n'Quiet faq
and it's still not working, what am i doing wrong or is it a broken mobo or maybe cpu?
I contacted msi about this and got this in reply
Dear Customer,
Current bios will not fully support the Venice Core processors yet which the release bios will be done by end of June of 2005, thanks.
so for everyone that has the same problem, its not you and it will be fixxed 

Quote from: msiuser99 on 02-June-05, 09:34:52
OK, this may be over simplified. Have you loaded core central and clicked on the "cool and quite" hyperlink? This is all I do and I can hear the fans slow down reducing noise. Even though I do not have cool and quite turned on in my BIOS settings. I am running a completely different setup than you, so this is not case and point. Just thought I'd mention it.
If I do that my fans slow down alot and I get a quiet computer but as its not clocking down as Cool'n'Quiet shuld do it gets to hot so I will wait for msi to release a new bios that fully supports Venice core cpus

Similar Messages

  • 785GTM-E45 - Cannot Get Cool N Quiet to work

    So ive been in and out of the Overclock (the switches on the motherboard its self) and Cool N Quiet doesnt seem to be throttling the CPU and voltage at all when the computer is idling. Overclocked or stock clocks, it doesnt adjust anything.  Im using CPUID to watch the speed and voltages.
    Im using Windows XP 64bit with a Athlon II x 4 630. The power options set to "Minimal Power Management"
    I also have double checked the bios to make sure it isnt Auto, but instead "enabled"
    I tried updating the cool n quiet utility but it says im already up to date. I have already updated the bios as well.
    Any suggestions to get this work properly?   
    I

    Quote from: nt650_999 on 02-January-10, 18:01:29
    All that tree hugging hippy green-earth power saving junk just adds variables to an already complicated and delicate situation in a well OC'd machine.  C&Q and related 'wares have never added anything to stability and have often been known to detract from it.  Serious overclocking is virtually the opposite of saving power.  Why risk stability (or run at lower speeds) to satisfy your need to be green?  Just turn the machine off when you aren't using it.
    You guys...  I really dont care about thread battles.  Although I do agree, some people could just simply turn off the rig sometimes but I have an issue thats probably easy to fix.   I've had an overclocked E5200 to 3.5ghz before and what ever the heck Intel calls their version of Cool N Quiet; it was working perfectly fine.  I also had an 3800x2 that was able to throttle down on a Via chipset motherboard!
    So, im just tryin to satisfy my self with overclocking and have Cool N Quiet at the same time. If Asus and Via can do it, I need to figure out why this 785gt isnt doing it properly.      :D
         

  • TS2972 I cant get my home sharing to work on my mac book, apple tv or iphone. Just wondering if someone could help. It used to work now it does not. Thanks

    I cant get my home sharing to work on my mac book, apple tv or iphone. Just wondering if someone could help. It used to work now it does not. Thanks

    The helpfulness of answers is limited by the details provided.  Just saying it does not work, or I got an error does not provide much to go on.  How is it not working?  What happens or does not happen?  Is an error returned?  If so what error.  Are you sure you are logging in with your home sharing ID?  It is not the same as your Apple ID or iCloud ID.

  • 870A-G54 - Cool'n Quiet not working

    Hi folks,
    I've just got an 870A-G54 ( http://eu.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2057 ) and have a Athlon II x3 450 in there. I've tried to get Cool'n Quiet working but it's simply not throttling the CPU. Both AMD Overdrive and windows system-panel show the speed to be 3.2Ghz on all three cores despite the PC idling.
    - The power-management is set to minimal.
    - Cool'n Quiet is "enabled" in the Bios - also tried "auto" to no avail.
    - I've installed the drivers from the website. Whenever I try to install them again I get a message saying they're "already installed". I can't seem to find a way to uninstall them (nothing in add/remove panel). I've even uninstalled all my other AMD processor drivers/utilities (i.e. Overdrive), but it /still/ says I have the drivers installed.
    Using Windows XP SP3 32 bit.
    Note: I have not, overclocked, nor do I intend to.
    Any suggestions on how to remove the driver and re-install it? Or, what else may be wrong?
    Thanks.

    Ok, fresh install of XP SP3 on a separate partition. Absolutely nothing changed from the base install (apart from the mouse-buttons swapped). I try and install the Cooln'Quiet drivers from the MSI website (bottom of - http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2057 ).
    When I try and install it, it gives an error saying:
    "The machine does not have a supported AMD Athlon 64 Processor".
    This happened with this partition of XP too, but I couldn't replicate it so thought maybe it was my memory or I was going crazy. CPU is still reporting 3.2Ghz.
    The download page states: "• AMD Athlon™ 64/Sempron™/Turion™ 64/Opteron™ systems". My processor is an "Athlon II". Looking at the date and the version number, the drivers are very out-dated. The other version I aquired from who-knows-where is XP 1.3.2 for XP and almost a year later. The MSI page has 1.2.2.0. The Athlon II's date from 2009 onwards according to wikipedia.
    So where do I get current Cooln'Quiet drivers?
    Also, as mentioned I've tried both "Optimized" defaults and "fail-safe" defaults in the BIOS with CoolnQuiet enabled. No change.

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • HT5312 I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
    Thanks.

  • My friend got a new iphone 5. when he was setting it up and the icloud questions came, we couldnt get past one it was almost like it froze but it didnt he just cant get past it. what do we do?

    my friend got a new iphone 5. when he was setting it up and the icloud questions came, we couldnt get past one it was almost like it froze but it didnt he just cant get past it. what do we do?

    What question?
    What did you try?
    Was the device connected to Wi-Fi or Cellular data?
    Do you really want help?  If so, stop being vague and provide some details.

  • I cant get my push notifcations to work on my iphone 5

    I cant get my push notification to work on my Iphone 5 it says i am noty registured for alerts i tried everything and still wont work...none of my apps alerts are working.espn, facebook, ebay ,ect any ideas that might help me or am i missing something

    and it says connect to itunes to use push notifications what am i missing?

  • I cant get my adjustment brush to work!

    I cant get my adjustment brush to work like it use to .. it keeps paiting red and not doing any adjustments

    The red is the mask overlay.  Turn that off.

  • I cant get my hp 5550 to work

    i cant get my hp 5550 to work i need the pkg of the hp drivers that comes with mac osx 10.5 installtion disk to see if that works

    HP has drivers for the 5550 on their site for download.
    Exactly which 5550 is yours?
    Joe

  • Cant get server for msn to work on iphone 4

    Hi I cant get my MSN SERVER for MSN to work on my Iphone to receive and send mail I have tried the out going and incomming port codes but NO luck does anybody know how to make my MSN work on my IPhone 4 .
    thanks

    Again the operator CAN create the config file and send as an SMS . This config file contains the correct settings.
    You just open the SMS and it auto installs in the phones config bundle
    You then boot the phone down and reboot .
    It really is simple however many MVNO services can't be a**ed -that why their cheap!
    Not in dispute with you on the problem - yes it's the APN defaulting to ATT and being blocked as a non- subscriber. And compounded by the MVNO Sim card not having the correct protocols to view the APN menu item.

  • Cant get airplay and remote to work again.

    So im currently having problems getting airplay to work and remote to connect to my itunes again. I have the iphone 5 and iv been using airplay and remote on it since i got it untill couple of days ago i cant seem to get the airplay icon to show up when my reciever is on and i cant get it to connect to my itunes using remote. I already try restoring the phone but i dont think that was the problem. I get get airplay to work from itunes though. Bascially all the hardwired things can access airplay but not the wireless stuff like my iphone 4 and 5. I tried using my laptops itunes on the wifi and it didnt work but when i connected it to the router it works. Anyone having the same problem as be cause i dont know why is just stopped working all of a sudden when i didnt even change anything.

    Dave Cohen wrote:I solved by not downgrading.  Instead, install community/php52.
    genius, I'm back in business, many thanks

  • I cant get my Axiom 25 to work with my MacBook in Logic Pro 8. Anyone ?

    I have an M-Audio Axiom 25 and I cant get it to work in logic pro 8. Its plugged in... I have a new project open... I have an instrument assigned to a track...when I press the keys on the axiom Logic recognizes it because on the bottom of the window I see the note I'm pressing as well as it's velocity... This is exactly as I do on my roommate's MacBook Pro every day with the same keyboard... But none the less I don't get sound... even if i just click the piano roll... The levels for the track remain at zero all the time... Whereas on my roommate's computer I would be jamming... What is wrong??? PLEASE!!! SOMEONE HELP ME!!!
    O Yeah! I tried to download the latest drivers from M-Audio but there website just led to a dead end... And 10.5.1 was there latest version anyway... Can some send me a hyperlink to a location where I can actually download it from??? It would be greatly aprechiated...

    According to M-Audio's website you don't need a driver. If you click on the link that they have there this message pops up:
    'This device is class compliant and does not require driver support for OS X.'
    As for your other problem.....Dunno. Make sure you check the audio device preferences in Logic. Your roommates might be set for that piece but yours might not.
    Good Luck!

  • Cant get Apogee Duet/Masetro to work on my brand new MacBook Pro

    Alright.. maybe someone can help me here?? I just bought a new 15inch macbook pro, logic pro 9, and a apogee duet interface.
    After installing everything, I cannot get the Duet to work at all!! Maestro doesnt pop up when I connect. I have to manually open it...and when I do, there is nothing on the controls...its totally blank, and I cant click on anything. I also cant get my guitar to record in Logic, or find the right inputs...is that because Maestro isnt working right? I assume yes.. anyways...I just want to know how to fix the Duet so it works properly.. I uninstalled and reinstalled, and that did nothing...

    It all depends on how long the duet you purchased was sitting on the shelf. But by all means go ahead and ignore the advice you are offered on this forum.

  • Cant get Fast Track USB to work

    HELP!!! Please!!! I just bought the M-Audio USB Fast Track, and I cant get it to work!!! I have an iBook G4, and I wanted to connect my guitar directly to the computer, but the iBook doesnt have an audio-in. The problem, is that I cant get GarageBand to recognize the M-Audio. I already set it as the input audio in the system preferences, but I cant record my guitar and I feel really stupid.
    Someone knows what is going on?? Please help me!

    Try starting Garage Band, then go to preferences -> audio/midi and setting the fast track as your audio in and out device.
    You should quit and restart GB after you do this so it initializes properly.
    You will have to plug your speakers into your fast track to monitor your recordings so you might need to buy some cables.

Maybe you are looking for

  • BUG: Power Manager fails to autostart

    Alright, this topic is a continuation of my conversation with Lenovo support on Twitter, as it has been a while and we were unable to resolve this problem. Until recently I had Windows 7 x86 running perfectly normal with a number of ThinkVantage tool

  • There is a lot of hang time opening and during the running of firefox. I only had 4 tabes open and it just hangs at different intrivals. It is really annoying.

    Hang time for Firefox 16 every time I open the browser it hangs. Then it hangs intermittently while i am trying to work. It does this about 5 to 6 times during my work load. It only has 4 pages opened up. I normally like using firefox. However I am a

  • My itunes library and ipod playlist disappeared?

    i'm not sure what happened, but i intentionally deleted a bunch of mp3 files from my library (about 75% of my music folder) after uploading them to my 30 gig new generation Ipod. I believe that after this action, my Itunes library disappeared - inclu

  • G6-2277 5.1 sound system

    hi there. i have g6-2277 laptop. i want to know if my products supports 5.1 sound systems.  it has dolby feature on it and hdmi output but i want to have 5.1 on it.  if i buy one,and connect it to my laptop properly, will i be able to recieve 5.1 qua

  • GI Issue !!

    HI 10 ea of material X issued to a cost center 1001. Next day the guy comes and wants to return 2 ea of X back to store. I try to do 202 in MB1A for same material X from cost center 1001 then I get this error "Update control of movement type is incor