Just connected a Linksys plw400 extender to my wifi network & IPad 2 looses Wifi connection

Just connected a linksys plw400 to my wifi network and now my ipad2 can see the network but cannot connect.  When I disconnect the linksys plw400 my IPad2 will connect albeit a weak signal which is why I bought the extender which works fine with my Dell laptop and Galaxy S3 can anyone help me with this issue?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Just connected iMac to HDTV

    Hey guys, Just connected my iMac to my samsung HDTV via a mini dvi to HDMI adapter, picture is awesome, i just have a question, i am basically in a DUAL SCREEN mode, both my LCD and my iMac screen work together at the same time, moving my Mouse cursor all the way to the left enters my LCD screen and i can do whatever i want on the LCD screen! its really nice, but i have a question, when i watch a video or something on the LCD TV side , my iMac's screen stays ON, as in the screen doesnt turn off as it should , i have it setup so the screen turns off after 3 mins of inactivity but heres the thing, how do i tell the iMac to turn the screen off when im using the LCD side in the Dual Mode?

    Go to System Prefs/Displays/Arrange and set the iMac in Extended Desktop mode (you are calling it Dual Screen) then drag the two display icons into your preference order and drag the menubar to your HDTV to make it the primary display.
    Now if you use Front Row to view all of your media; DVD, Photo, Video, etc, when FR appears on the HDTV the monitor on the iMac will darken. Media that you view with iTunes should do the same. Some 3rd party multimedia apps may also darken the secondary displays when in Extended Desktop mode with multiple displays. I only use FR.
    Dah•veed

  • Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
    Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
    You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
    The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

  • Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

    I am a big fan of both the Airport Extreme and Airport Express.  In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters.  We have a good quality wired Cat5e ethernet network extended between the buildings and offices now.  Is this possible and does it seem like a good practical solution?  I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas. 

    Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
    Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

  • So, i just connected my ipod touch 4g to my laptop and there is an update 4.3.3  available  i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!

    i just connected my ipod touch 4g to my laptop and there is an update 4.3.3  available  i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!

    Try a direct download:
    iPod, iPhone and iPad Firmware Download
    Manually install it by holding your "Option" key down when clicking on the "Restore" button in iTunes and select the firmware file you downloaded.

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I just connect one monse to my MacBook Air and now my keybord is not working

    I just connect one monse to my MacBook Air and now my keybord is not working
    What to do?

    lrfrustrated wrote:
    I just downloaded Adobe XI onto my macbook air and now I cannot save or print any PDF files. Will not let me do Print-Save as PDF, and if i do Save as i get a message saying that the file is corrupted. I had NO PROBLEMS at all doing this many times until i downloaded the new version. I have uninstalled and reinstalled, to no avail. I am super frustrated.
    Print>Save as PDF - uses Preview (part of OS X), so Adobe Reader should have no effect on that at all.
    As to the "damaged file" error, simply uninstalling the Reader app won't affect it. Do the following:
    Mac HD/Library/Internet Plug-ins
    Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
    Mac HD/Applications
    Trash the Adobe Reader app
    [user]/Library/Preferences
    Trash the com.adobe.Reader.plist file
    To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
    Mac HD/Library/Application Support/Adobe
    Trash the Reader folder (the whole folder)
    Empty the Trash.
    Download the FULL installer here: http://get.adobe.com/reader/enterprise/
    Quit your browser and reinstall Reader.
    Launch it from the Applications folder and accept the license agreement.
    You should have no problems downloading PDFs with Safari.
    Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them.

  • I just connected my Mac Mini running OS 10.6.8 to a IG 32' monitor. What resolution should I select from the menu?

    I just connected my wife's Mac Mini running OS 10.6.8 to an IG 32' monitor. What resolution should I select from the menu in order to provide maximum screen appearance? My wife has AMD and a visual acuity of 20/400 with central scotonata.

    In System Preferences:Displays you have an option to show
    Displays Prefs in the title bar above the screen - where she can
    iteratively adjust to her liking. Higher screen resolutions, ironically,
    result in smaller characters so adjust to suit. Below, Displays is
    4th from L.
    All best, Tom

  • Why Apple TV? Can I just connect my iPad to my TV?

    I'm really only using my Apple TV to watch Netflix and purchas the occasional movie.  Couldn't I save the $99 and just connect my iPad to my TV and do the same?  Thanks!

    Yes, assuming you TV has the inputs to handle it. You would need and HDMI cable and an HDMI adapter. However, as the owner of an AppleTV, I can tell you it is much more convenient to use it.

  • Hi,   I just bought a linksys WRT54G Wireless Router. My...

    Hi,
    I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
    While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
    I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
    What is wrong?
    Thanks in Advanced

    Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

  • I have just connected my new apple tv, in the main menu I see only two icons; "computers" and "settings".  Where do I find the icons for internet, movies etc. We do not live in the US..

    I have just connected my new apple TV and in the main menu see only two icons: computers and settings.  How do I access the rest of the icons (internet, movies etc...)  We do not live in the US.  The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.

    Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
    Reading through the threads my take is
    There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
    Power off, reset and factory restore doesnt seem to solve it
    Occasionally its nearby antenna cables etc causing interference
    One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
    Plugging in ethernet works, this is purely a wifi issue
    Sometimes plugging in ethernet temporararily wakes up the wifi
    Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.

  • Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

    Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

    Hi im,
    Thanks for using Apple Support Communities.  This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    http://support.apple.com/kb/TS5148
    Cheers,
    - Ari

  • I get a blue screen by just connecting my Megastick 511

    I have just bought MSI Megastick 511 256 Lite USB 2.0. I use Win XP Pro SP2.
    If I just connect the Megastick to the USB port I get bluescreens (for example
    IRQ LESS OR EQUAL) and after reseting the computer the same thing happened again.
    I tried formating the drive by starting the update utility and then while it was searching
    for the device I connected the stick.
    Even after this I can't connect the Stick to the USB port without crashing the whole system.
    I really hope that I don't have to run the update utility if I wan't to connect the stick.
     

    Quote from: Dr Stu on 12-November-05, 02:46:35
    well, try it on another system, see if the same thing happens. if so, then your Stick may be faulty...
    I have now been able to test it on another system wich also has Win XP.
    Result there was no such problem whatsoever on that system. I could both plug (both the MP3 switched on and off)
    and unplug it without going through the STOP routine via the icon shortcut and all this without crashing the system.
    On my system I get in most cases bluescreen with the message IRQL_LESS_OR_NOT_EQUAL when I plug it in. There has been one exception and then I had the stick switched of. If I just unplug it without first STOP it I always get bluescreen.
    But when I plug in it the sticj shows a computer logo and the text connected so it seems to intiallally communicate with the computer.
    I have tried USB port on both the Motherboard USB ports and USB ports on a separate PCI card wiith the same result.
    I wonder is a MP3 player just a USB memory device from the computers point of view? My experience with pure USB memory is that they are just to be plugged and unplugged without any software like the STOP utility. How does this MP3 player differs from other MP3 players regardinf how it's seen from the computer?

  • Do I have to use my computer for my ipad or can i just connect to itunes through the ipad?

    Do I have to use my computer for my ipad or can I just connect to itunes through the ipad only?

    Vague.
    What are you trying to accomplish?
    The ipad is not a stand alone device.  It is designed to be synced to your computer regularly.
    You can buy itunes content from your ipad, but you need to transfer it to your computer and included it in your regular backup of your computer.

  • I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.

    I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.

    Try Settings > General > Reset > Reset Network Settings.

Maybe you are looking for