Just did software update, now mail won't open!!

I just ran a software update and now may mail application won't open. These are the five updates that I installed:
Backup 3.1.1
iPhoto 6.0.6
Airport Base Station 5.1
iTunes 7.2
Mac OSX Update Combined (PowerPC) 10.4.10
I don't think I needed to install that last one, about the Power PC....Anyone know if that is enough to keep my Mail App. from openenig? I can still check my e-mail via .Mac, just not through my Mail Appliacation.

Did you download the correct Combo for PPC, since it
appears you do not have an Intel Mac?
If the correct Combo version, then I think you should
run Disk Repair from the original Tiger install disk
to check out your hard drive.
How much free disk space do you have on your hard
drive, or if partitioned, on the boot partition?
Ernie
Ernie,
thanks for the suggestions. I'm not quite the Mac expert I'd like to be, so bear with me please. How do I know if I downloaded "the correct Combo for PPC, since it appears you do not have an Intel Mac?" Wouldn't my computer automatically download the correct one? How can I check if it's the right one? ALSO,
How do I "run Disk Repair from the original Tiger install disk to check out your hard drive"? Do I need to insert the original startup disk again, or can I do it without it?
When doing info on my mac, it says I only have 6.1 GB left available. THANKS FOR YOUR HELP!!!!
Wade

Similar Messages

  • Latest updates now mail won't open

    Down loaded the latest updates today now mail won't open??

    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, reinstall any updates that may not have been installed properly. It may also be necessary to reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with your computer:
    Mac OS X 10.3.9 Combo Update
    Security Update 2007-003 for Mac OS X 10.3.9
    Take a look at the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

  • Just did software update now "must restore" with itunes but am being told it can't be restored

    did a software update on my 5 now it says it needs to be restored but itunes says it can not be restored. "unable to continue withactivation" Does anyone have suggestion s?

    In defense of original poster, I have had so many issues with hacking and bots, etc. - & I am certainly not jailbroken - that it has become ridiculous. There's tons of information out there about this growing problem.

  • Security Update....restart.....now Mail won't open!

    I just installed the latest security update, restarted and now Mail won't open. What's going on?

    John,
    There is something strange about this update notice by means other than Software Update -- the one I saw was on MacMinute. Neither of my Macs running 10.4.5 had this one presented by Software Update. It is very close to the same version number as the one presented yesterday by Software Update. I have been trying to find whether there was a specific "fit" for it, but have not found the key.
    Downloading and installing an update of this type, that is not presented by Software Update may be problematic. I will keep researching.
    Ernie

  • I updated the maverick and now mail won't open at all

    i updated the maverick and now mail won't open at all

    Have you tired opening it from the Applications folder?
    What happens when you try to open Mail?

  • I did software update, now java in Safari doesn't work.

    I ran software update, now Java in Safari and Firefox doesn't work. How do I fix it?

    I already tried that.
    I am running OS 10.6.8.
    I did a "normal" software update (under the Apple icon).. didn't update the OS to a higher level, it's still 10.6.8. But now certain websites tell me that Java is missing or not working. When I go to the Java site, they say that you can only download the newest Java for OS 7 or higher... that Java is automatically part of OS 6 and should have automatically updated when I do a Mac software update.
    Java used to work. Now that I've "updated" my Mac software, it doesn't work. And there's no way to download and install Java (according to them).
    It's a never ending circle with no solution.

  • Downloaded lastest update now itunes won't open

    downloaded lastest itunes for windows. now itunes won't open getting error massage

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Downloaded update now itunes won't open

    I downloaded the new update and now itunes won't open.  I bought a new computer and was trying to transfer my library from my ipod to the new computer but now the program doesn't respond at all.

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Itunes updated, now it won't open.

    Itunes was updated and now it won't open. A box appears reading "New Itunes Library". What's going on?

    I had this and managed to fix it:
    Download iTunes from https://www.apple.com/itunes/download/
    Open the Terminal
    Run "sudo rm -r /Applications/iTunes.app"
    Re-install iTunes

  • Accepted the software update and now mail won't open.

    I allowed the software update and now I'm getting an error message when I try to open mail.  I went into applications and there a strange icon for mail but when I click it, it doesn't open.  Help!!
    Thanks,
    Cindy

    What version of iPhoto?
    What format is the disk?

  • Just upgraded to Maverick, now mail won't automatically upload new messages

    My 93 year old father just upgraded his operating system to Maverick and now his new Mail won't automatically upload to his inbox.  I don't use Mail in this way and have no idea what adjustment needs to be made so it will work again.  It keeps asking for his email password but that doesn't help.  Any suggestions?  I'm sure it's an easy fix...somehow they just aren't communicating...  Thanks!

    OS X Mail: Troubleshooting sending and receiving email messages

  • HT4623 I DIDNT HAVE A PASSWORD ON MY PHONE BEFORE I DID THE NEW UPDATE. I PUT ONE IN AND THEN DID THE UPDATE NOW IT WON'T ACCEPT IT. HELP

    I didn't have a password in my phone before the new update and a friend told me I had to. I put one in before I did the new update, now its complete but won't accept the password. Help?

    Try this help article:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • Updated Quicktime...now Mail won't open

    I updated quicktime yesterday and immedately afterwards Mail would not open anymore. It just bounces (usually just once) and then nothing. Anyone know how to fix this or how to revert to the previous version of quicktime?

    Actually, I have it on very good authority (Apple
    person) that you can install the combo 10.4.6 update
    and it will not step on SecUpd 2006-003 components
    I cannot believe this. The Mac OS X 10.4.6 Combo Update would certainly overwrite files installed by the Security Update 2006-003 (e.g. Safari). Could this be a misunderstanding? The Security Update 2006-003 does not touch anything in the Mail.app bundle, could this be what that person really meant? I'm pretty sure reinstalling the Security Update 2006-003 is necessary if the Mac OS X 10.4.6 Combo Update is reinstalled on a system where the Security Update 2006-003 had already been installed.
    Also, I don't think that the Combo will alter the QT status.
    EDITED: I agree with you on this, but I'm not sure, so I thought it would be appropriate to be on the safe side and take that possibility into consideration.
    I suspect it is the Mail program that got damaged
    I don't think so. According to the Console error messages, Mail crashes right upon start up because there is something amiss in /System/Library/Frameworks/.
    Not sure QT re-install is needed.
    It could very well be that properly reinstalling the QuickTime update fixes whatever went awry in /System/Library/Frameworks/ during the first attempt. If not, then reinstalling the Combo Update will be necessary, indeed.
    I'll try installing the QuickTime update myself tomorrow (today here :-)) to see what happens.
    Regards.

  • Software update now phone won't synch!!!

    Hi!
    Can anymore please help me!
    So i have the latest iPhone 5S, it stated it needed updating in software, so I updated it to iOS 7.1 today, but not via my itunes, it was just updated on the phone.
    The software updated without any problems at all, but when I have gone to link it to my Macbook, it has stated that it is unable to start synching, this has happened every time, has anyone else had problems with this!
    Thank You!!!!

    Actually, it would explain why the battery depletes. If the device is constantly trying to search for the network it will run the battery down quite quickly. I'm skeptical that the sim card will fix it since Verizon doesn't use a sim card in the US. The sim card is only for international roaming. I don't know what happened during the update but you may need to reload the OS on the device.
    And, "POS?" I've had my Z10 since launch day and love it.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Software Update now program won't recognize my camera

    Monday, I installed the latest software update from apple and when I launched final cut pro, it no longer sees my camera. I am using a sony HDR-FX1 hd camera. What can I do to fix this issue?

    I just had a similar issue with a different piece of equipment. Could it help to go to the Sony website or google search to see if there is a driver or other software for the camera to install to be compatible with the update??

Maybe you are looking for

  • How to give Selection Parameters text in Standard SAP reports?

    Hi, I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen. But I am not able to give text to the selection parameters. I checked with Modification overview, its not allowing me to put text to cu

  • Reading Sybase Text data in java

    I am trying to read sybase text type column from my java code, I appreciate if you any one could help me out on this with code thanks mathew

  • Weblogic JMS Error

    Hi All, I am using JMS adapter fro weblogic queue... process working fine....but some times geeting below error... WSIF JCA Execute of operation 'Produce_Message' failed due to: ERRJMS_TRX_BEGIN. CCI Local Transaction BEGIN failed due to: ERRJMS_GET_

  • Working with Adobe Muse and BC?

    Hi there, I have been working with Adobe muse for a little bit now and I am wanting to take my website to the next level. I am specifically looking at the webCommerce Business Catalyst package. I just want to know how hard it is to embed things like

  • Help needed with server essentials 2012 R2 client backup failing

    Help please.  I have installed WSE 2012 R2 on a new Lenovo TS140, everything seems to be working fine (I can map drives, browse folders, copy files back and forth to clients, run the server through dashboard from a client, run the server through remo