Just did System Restore/did element10to11 under free Revel/decline/can't re-install with ser/num
just did System Restore/did element10to11 under free Revel/decline/can't re-install with ser/num
And what exactly? Sorry, you need to explain better. Just spitting bullet points is not going anywhere. In particular provide some system info and describe the exact problem. Does the installer launch at all? Are there error messages?
Mylenium
Similar Messages
-
My daughters iPad has just been factory restored from the apple shop, she was using my iTunes account with her email. When trying to create her own iTunes as she is the correct age it has come up that her email is already being used. How do we do this with he same email address
Hello spooner68,
Thank you for the details of the issue you are experiencing when trying to create an Apple ID for your daughter. Because her email address is associated with your Apple ID, you are receiving the message that the email address is in use.
To remedy this, you will have to first remove her email address from your account using steps 1-3 of the section titled "How to add an additional email address that is already associated with another Apple ID" in the article below and then attempt to create her Apple ID with her email address:
How to add an additional email address that is already associated with another Apple ID
If you have an email address that is already associated with another Apple ID, you may need to remove it from your other Apple ID before you can add it to your preferred Apple ID.
Sign in to My Apple ID with the Apple ID that has the email address already associated with it.
Find the email address that you want to move to your preferred Apple ID, then click Delete.
Click Save Changes, then click Sign Out at the top of the page.
You can find the full article here:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I just updated my iPad to IOS 7.02 and unfortunately can no longer sync with my MacBook running OS 10.5.8. I'm wary about updating to Lion as this may cause any number of apps on my Macbook not to work at all or malfunction. Also my MacBook is 5 years old, and I was thinking about purchasing a new computer. I would like to decide when rather than be forced though. Does anyone have any suggestions for a work around? At the moment I do not subscribe to the cloud, and it looks like that is the only way I can back up my iPad now.
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILLHmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now? -
Just did an Archive and Reinstall - what can I delete??
Hey!! I just reinstalled to 10.4.8 after all my issues with 10.4.10. I now have the "previous system" folder and I am wondering what I can safely delete.
It looks like there are two copies of all the mac software, but all my software is on the current os. So can I just trash that whole previous system folder? Or do I have to keep anything out of it?
Incidentally, the dude at the apple store did it, and he said he used a different disk for the OS I have now and I should install the Front Row application from my own disk at home. That's totally cool with me but what do you all think of that? And/or could I just drag it from that previous systems folder? Thanks for your help!!
kathyYou may want to check for any items in the /Library/Applications Support/ folder for any specific folders you may want to transfer to the new installation. Otherwise, you can delete the PSF.
-
Is there any way i can restore itunes to an earlier time/date, just like system restore? Thanks!
Hi..
Is there any way i can restore itunes to an earlier date/time? I accidentally lost a previous backup and now the file showing up is not the backup i want? Can i restore itunes to an earlier time like system restore on windows? Thanks!Actually i had my iphone os upgraded so i made a backup prior.. After the upgrade, instead of restoring data back the iphone made a new backup, overwriting my last backup, so now all my data is gone and when i went to appdata, oldest backup made is the one made after the upgrade! So i am looking for an undo of that backup, kind of a system restore for itunes.. Any suggestions? Thanks!
-
Just did the 2.1 SW update, can no longer connect to Exchange Mail Srvr
Just Updated to the 2.1 iPhone SW. Now can not connect to my email account on Exchange Server 2007 which I had no problem with prior to the SW update.
Can not send or receive email and all email previously in account on iPhone is now GONE!
After SW Update phone threw off message that it was now activated. Then got a notice about email not recognizing certificate came up when I tried to access my email account on the Exchange Server.
When I try to get or send email get message Cannot get Mail, the connection to the server failed.
What do I need to do?I had similar odd actions, such as the iPhone Activated message. Now, cannot do anything with the exchange account. Cannot delete it, turn it off, get to account info screen. Each time it freezes in transition requiring either home screen button or shutting down.
-
I am a new apple user...sorry it took so long. I did a recovery from my time machine but I can not find any of the filesI was saving on my desktop. Are they gone for good or is there some way I can get them back? I am desperate...should I save my regular used files somewhere else other than my desktop?
Can I get the old desktop files back????When you open TM you should see all of the desktop items right away. If they are not there, go back a day before you made your last retrieval. (Look for the dates on the time line on the right hand side of the display)
Ciao. -
Just did the most recent update, now I get no notifications with messages
Just updated to ios 7.1.1. now when I get text notifications in messages, I get no notifications, no sounds etc. Have checked all the settings and they are correct.
If I want to go back one update, whats the best way to do it with out loosing my info etc?It's too late now, if you want to use the iPhone, you need to restore.
It's very Important to backup iif you have important stuff you want to keep, do it more often, especially a IOS updates.
Message was edited by: ckuan -
The program no longer will open or respond in any way.
Hi, Well Bob, that is certainly good news!!
You did very well, glad it is working for you. That was tricky, getting all those ducks back in their row:-)
You might try www.ESPN3.com. If you have any problems read the system requirements and especially the FAQ part.
Thanks for posting the steps you took. Hope you didn't have a difficult time following the procedures on the Uninstall or Install sites.
No more betas for you!! LOL,
Regards,
eidnolb -
I might be buying a new macbook air to go traveling with.. i have a macbook pro already and want to restore from the backup onto the new macbook Air but am not sure if there is enough memorie on the air... Can i restore from the back up and only put on certain files and programs.. I only really want my photoshop and dont have the serial code anymore..
When using Migration Assistant or Setup Assistant you can only choose all or none of the Applications. You have a little more flexibility about the files in your account(s).
What I did when I had to migrate from my MBP to the MBA was to use SuperDuper! to create a clone backup of my MBP. Then I deleted the programs and files (mostly music and video) I didn't intend to put on the MBA. Then when the MBA arrived I used Setup Assistant to migrate everything. -
When i was at school I left my Ipad at a table and forgot it but i realise it when i got out of the room it was in the cafeteria it only took like five minutes for them to stole it. i had find my iphone app but it seems they turn it off or restore my Ipad. is there a chance i can track it with just the serial number?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
Cheers, Tom -
How can i re-install with my system discs withou a working cd dvd
I had to wipe my hard drive and I thought i could re-install my system with the original discs, but my superdrive isnt working. I have the original CDs, I have my new macbook pro attached by firewire and I have a usb external drive with a time machine backup for the older laptop on it. The dvd installer wont let me select anpother disc, and the system on it doesnt seem to be recognized by the new laptop. help?!?
Take a look at this link, https://discussions.apple.com/thread/1564917
-
IMac won't reboot after system restore from Time Machine
I just installed a wacom intuos pro tablet on my imac running snow leopard. The system clock reset to 1st Jan2000 and system prefenerces were no longer accesible. I performed a system restore from my time machine but now can't reboot. The restore completed succesfully (or so the it told me). When i restarted the imac i got the usual 'bing' followed by grey screen and spinning wheel swiftly followed by a light blue screen with the cursor in the top left hand corner.
There is sat for an hour befoe I switched off and tried again......same result.
The installation disc is still in the optical drive.
Any advice please on how to remidy this?
ThanksI have/had a similiar problem. What I did was reset the SMC and PRAM. You can also do a safe boot. For the PRAM, I had to do three times, and my computer finally booted up. Afterwards I verified my disk and repaired my permissions. So far so good. I guessing that Spotlight needed to re-index the system.
http://support.apple.com/kb/ts2570 -
Network Error in Client Full System Restore
Hi,
I've been attempting, as a test, to restore a full system backup to a client computer using a boot flash drive. When I attempt to do so, I get a "Unknown Network Error" at the point where the client has attempted to contact the server, been unable
to and offered the opportunity to enter a name or an IP address. When I enter either one, I immediately get an "Unknown Network Error". There's no error number or other specific identifying informations.
Details:
The client computer is a UEFI motherboard PC running Windows 7 Professional. It connects with no difficulty whatsoever on a normal basis to the Windows 2012 R2 Essentials server. It gets backed up every night by the server over the network with no problem.
When I boot from the Network Client Computer Restore USB key, everything works fine except that it is unable to find network drivers. When given the chance to load missing drivers, I use the "Drivers for Full System Restore (from the full system backup)"
on another USB key and they are found just fine.
Then when we get to the point of searching for the server, it appears to look for 30 seconds or so, then a dialog comes up asking whether to search again or if I want to enter a IP or name. Searching again doesn't yield results, and when either an IP or
the server name is entered, I get the "Unknown Network Error".
I feel certain there must be some logging that is either available or could be turned on if I knew how. I feel concerned that I would not be able to restore my client computer if something were to happen. Any ideas would be greatly appreciated.
JeffHi Justin,
Thanks for your response. I'm sorry that I didn't see it sooner - I guess I assumed I'd get an email if there was a response...
Anyway, at the time when the error occurs, the OS is not running. We have just booted via PXE over the network and started the "Full System Restore" Wizard, so it is not possible to "ping" the server. However, the fact that we successfully
booted via PXEs tells me that basic connectivity exists to the server, because otherwise the PXE boot wouldn't work.
Thanks for the pointer to the logs - I'll check them.
What I have done since I last updated was to do a few experiments. I added a Windows 7 boot image and install image with the Windows Distribution Service, so that on PXE boot I'm given 2 options - a Full System Restore and a Software Install.
I also roped another PC into service, one that is running from BIOS rather than UEFI. On that PC, both the System Restore and Software Install via PXE boot work fine. This tells me the server is at least nominally working, and that the problem is related
somehow to the specifics of the PC being connected. Could be server setup still, could be something on the PC.
On the computer with the UEFI, neither Full System Restore nor Software Install works. However, there is at least a clue in the error response from the Windows Setup - I get a lengthy error message that essentially says that \Windows\Boot\EFI\bootmgr.EFI
is corrupted. I'm not clear whether at this point we are referring to a file extant on the PC or one that is being downloaded that's being claimed to be corrupted.
This took me down a path in which, to eliminate variables, I changed the boot drive on the UEFI system from MBR to GPT. No joy. Also broke up my mirrored drive and changed the SATA from RAID back to AHCI. Also no joy. But everything I am reading is leading
me to believe that the problem has to do with the fact that my target PC has a UEFI BIOS. I continue to investigate - and will look through the logs you mention.
Jeff
Update 8/24/2014
Made some progress yesterday. I'm now able to use Windows Deployment Service to deploy Windows 7 over the network to the UEFI computer. I had to do two things to get that to work.
Turn off driver signing in the UEFI bios. That got me past the error screen complaining about a corrupted driver (which I'm pretty sure I don't have). But then it got hung up saying it couldn't find a driver for the network.
To fix that, I added the driver package to the boot image using the tools in the Windows Deployment Service applet.
After that, it found the server just fine, allowed me to authenticate, and would have proceeded to install Windows 7 if I hadn't aborted.
I then added the exact same driver package to the Full System Restore boot image, but it made absolutely no difference. Exactly the same symptoms as reported previously.
So, where am I and what do I know?
I can do both a Remote Windows 7 install and Client Full System Restore using Windows Deployment Services on an X64, BIOS based computer.
I can do a Remote Windows 7 install to my X64 UEFI based computer.
When I attempt a Client Full Restore to the X64 UEFI computer, I get all the way to the Full System Restore Wizard, which tells me that it can't find network drivers (even when they've been installed to the boot image). It finds network drivers when provided
via a USB key, but then when the Wizard looks for the server, it's unable to find it. When a manual option is presented, and I enter the server's IP address, I get an "Unknown Network Error" popup message, and I can't proceed further.
On the UEFI computer, I've tried all combinations of Compatibility Support Module (CSM) settings, but they make absolutely no difference to the Full System Restore process.
I've also tried converting the boot disk from MBR to GPT, didn't make any difference.
I "unmirrored" my mirrored RAID drives and changed the SATA bios from RAID to AHCI. Made no difference.
So, at this point I'm kind of stuck. I'm out of ideas for things to try for now. I did look at the logs as suggested, but didn't see much of anything relative to WDS. Possibly logging has to get turned on?
As always, any help or ideas would be much appreciated.
Jeff
Maybe you are looking for
-
How to get a name of the current marker?
I have two director files with same identical marker names (2 language versions). How I can make a button that changes the language (goes to the same marker of the other file). Something like... go to "current marker name here" of movie "language_2".
-
I am working on porting an plugin from CS5 to CS3 on a MAC, this plugin uses some features of boost libary. So when i try to compile the plugin in CS3 i get a no of linking errors related to boost, however the plugin builds successfully in CS5. So i
-
I am getting error messages on several different pages that my cookies are blocked but checking the Tools - Options - Privacy accept cookies and accept 3rd party cookies are both enabled and the web sites are not listed under the exceptions button ==
-
Use of Filter by in P6.2 Web Causes Auto Logoff
When I select any of the filter by icons the filter window opens but never populates with the filter selections. Then when I close the window and try to select the filter again, the application performs an automatic logout and returns me to the signi
-
Usage of Segment instead of Business Area
Hi, I wanted to use Segment as a separate field in New G/L without its derivation from profit center but as a separate field filled up by the user at the time of accounting entry so that I can use it in place of business area. Is that a possibility??