Just did the new Windows XP update and Fireworks CS# doesnt recognize the fonts

Can anyone help me out? this affects all my previous work all the old layouts just dont recognize the font that is still installed in the system, however if I rewrite it recognizes the font. Just dont want to rewrite all the text in all my past work which is a lot.
Thank you

I got ITunes and my IPHone talking to each other again. First off my Iphone was linked with the usb cable to my iphone. Also my PC could conect with my phone and transfer files.
This may be too simplistic, but I restarted my PC with the Iphone still conected and turned on. When the startup was complete I opened ITunes. Iphone was still not recognized. Then I unpluged my Iphone and plugged it back in.
The Iphone then became visible and the auto sync started up. All Good.

Similar Messages

I just got a new windows 8 laptop and I am trying to install the version of photoshop elements I bou

I just got a new windows 8 laptop and I am trying to install the version of photoshop elements I bought at Costco on it, and it will not accept the serial number on the package.

Hi Jglowney,
Please let me know what error you get while using the serial number to activate.
You may want to refer : http://helpx.adobe.com/x-productkb/global/error-serial-number-invalid-try.html

I just did an Time Capsule firmware update and now my Time Capsule is dead. What happened?

I just did a Time Capsule firmware update and now my Time Capsule is dead. What happened?

tresbaileys wrote:
it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility). Ideas??
That is very bad.. how old is it??
The Gen4 TC can die this way.. it is not usual but it happens.
Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
Tell me exactly what the LEDs do throughout this process.
Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
I kind of doubt you are going to get this going again... but we can try.

TS3212 i just got a new windows 8 commuter and cannot auth to use my i tunes

I just got a new hp with windows 8 and was able to down load my itunes but cannot auth my computer to allow me to listen to music . any ideas ?

Hi Jglowney,
Please let me know what error you get while using the serial number to activate.
You may want to refer : http://helpx.adobe.com/x-productkb/global/error-serial-number-invalid-try.html

Ive just got a new windows 8 laptop and can play games cause it says i new adobe flash player but its already installed?

.........bkhb

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Just got my new iPhone 3G home and iTunes won't recognize it

My phone was activated at the Apple Store. I was even using as soon as I got out of the store (for email and such). It won't show up in iTunes. In fact, when it's connected to my Macbook, it doesn't even show it's charging. There's nothing wrong with the USB ports - I've got my old iPod connected right now, and it's showing up just fine in iTunes. My phone gives the charging message only when it's plugged into the USB adapter into an electrical outlet. I've everything the troubleshooting document says - except for uninstalling iTunes. Both my iTunes and computer are fully updated. I checked just to make sure.
Any ideas? Phone works fine (well, haven't tried to make a phone call) - it just won't show as charging when connected to Macbook or show in iTunes.
Any ideas? This is a little disappointing.

No, iPod is not connected when iPhone is connected to computer. I plugged iPod in later to check USB ports.
ETA: This is very odd...I decided to try the cable for my 2nd gen Nano with the iPhone - and I'll be darned! The iPhone now works just fine with iTunes! Synching now...Guess I'll have to go back into the Apple Store tomorrow to get a replacement for the cord that came with my iPhone!
Message was edited by: Tradd

I just got a new Windows computer and need the download the airport utility for base station model A1408. Where do I find the download?

I just got a new Windows 7 computer and need the download the airport utility for airport extreme base station model A1408. Which download is it and where do I find it?

If you Google AirPort Utility for Windows 7......this is the first item that comes up:
AirPort Utility 5.6.1 for Windows - Apple

Help! Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week, and now my Mac won't let me past the log in screen even with correct password.

Help! Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week and the shop didn't update it back to Mavricks which I had previously done...and now my Mac won't let me past the log in screen even with correct password entered. It just spins like I'm logging in and then goes back to the user log in screen. I did the process where I restarted and pressed control S and created a new user and password, but once created same issue and can't get passed that screen.
Super frustrated and any help is appreciated!

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexi

I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexion. When I am entering my password for the connexion the software crashes. How can I fix the problem?

Migrating, transferring or copying is DEMANDING trouble, not just asking for it.
Always install from scratch, from the original media,

My iphone/itunes just did the complete new update with Icloud but the icloud icon doesn't show up anywhere on the iphone or my computer even though the install said it is all done and complete.

The Itunes and Iphone just did the complete new update addiing on Icloud and new applications. After all was done and it said all was completed - the Icloud icon is not on my iphone screen anywhere nor is it on my computer after I did go to the control panel and set up. I tried repairing the download and it said all was fine. What needs to be done to get this all to work.

Hi there,
Thanks for the reply. I did think that could be the case but then other books would also show up as apps on phone but not counted as an app. Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
Would you think that's the case too?
Thanks
Adam

Help! I just did the new OS update and all my photos & albums from iphoto are GONE!

I just did the new OS updated last night. When I opened Photos this morning, there was nothing. NOTHING! Not, photos in weird order or unlabeled. There were no photos period. Where did they go? What can I do? This is my work! I cannot have a decades worth of photos completely lost. Can I do something with timemachine to get them back. HELP!!!

This looks like Photos opened a new, empty library, because it could not access your iPhoto Library or Aperture Library.
Where are you storing your iPhoto Library? In the default location in the Pictures folder or on an external drive?
For Photos to be able to open your iPhoto Library, the library needs to be on a drive formatted MacOS Extended, and directly connected. It will not be able to open the library on a NAS or any network volume.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

I have CS6 and I just got a new Leica D-LUX and can not view my RAW (.RWL) images in Bridge what do I do? I already tried updating Bridge from the Help menu.

I have CS6 and I just got a new Leica D-LUX and can not view my RAW (.RWL) images in Bridge what do I do? I already tried updating Bridge from the Help menu.

Did you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing!

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips?

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))

In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html

Just did the new Windows XP update and Fireworks CS# doesnt recognize the fonts

Similar Messages

Maybe you are looking for