Just done the latest i tunes update and after a restart i tunes will not open
just done the latest i tunes update now it wont open
For the most thorough discussion of the iTunes issues see the user tip: https://discussions.apple.com/docs/DOC-6562
Similar Messages
-
Just installed the latest iTunes software update (iOS 5.0.1) on my MacBook Pro, and the extra images i had placed on my album covers in the selected item box have disappeared, leaving just one image per track. Any ideas on how to restore would be most appreciated...
Installing an iTunes update does not remove your media or personal files.
Are the files actually missing off the computer, if so, you have a serious computer issue... not a software update issue.
Regardless, use the backup of your media and other important files to put everything back. You do have a backup, correct? -
I have optimise my system and have 16GB of ram and am only running lightroom, any ideas? I have re installed the program
An Apple Tech have helped me by mail and solve my issue. Below, the copy of the mail :
Can you try resetting the SMC on your Mac ? Please follow the instructions here:
http://support.apple.com/kb/ht3964
I have also pasted the instructions below for your convenience:
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosingSleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications.
Resetting the System Management Controller (SMC)
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
In case this does NOT work, then try this:
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
Recently installed java script and after that now Adobe 11 will not open. What should I do?
Anybody have any problem with Adobe 11 after java is installed?@
Can you explain what you mean by "installed JavaScript"? There are a number of possibilities and the details may matter very much.
Also, what does "will not open" mean -- any messages? -
I did iPad update and now my Adobe pdf files will not open!
My update on iPad now wont open Adobe pdf files. Help...
So far just realtracs email pdf. I can try a stand alone. I think that will open. I will try to send you a screen shot.
Joni
Joni Miller, ABR, SFR, MDI, Realtor
Parks
4025 Hillsboro Road, Suite 601
Nashville, TN 37215
615.383.6600 (Office)
615.383.2151 (Fax)
615.390.1496 (Mobile)
[email protected]
http://www.bobparks.com/agents/jonimiller -
I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
I just loaded the latest version of itunes and now I cannot sync my notes from Outlook 2010 to my iphone. Notes no longer appears under the advanced section of the info tab. Since I have not had luck syncing in the cloud I always check the boxes and tell the sync to sync from my computer to my phone. Does anyone know how to get this to work.
When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod -
I just purchased the latest iPhoto to update my 7.1.5.I have run the Library upgrade tool 2x, each saying installed successfully.But, each time I try to open iPhoto, I get the msg,"To open this version of iPhoto,the library needs to be prepared"OSX 10.9.3
each saying installed successfully
It looks like you installed the Library Upgrader, but did not run it. It is installed in "Applications > Utilities". Launch this tool and click the "Choose Library" button to direct it to your iPhoto library. -
I can't make my sleeve pictures big anymore. (just downloaded the latest I-Tunes software)
I cannot show the sleeve pictures big anymore (just downloaded the latest I-tunes software)
If you mean the Cover Flow, that was removed when iTunes updated to version 11(through to the latest version 11.03.42)
-
I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.
All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.
-
I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video. -
I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.
Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!
-
hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?
Can you see them in Disk Utility?
If so, can you select and Mount them?
If not, disconnect them, reset the iMac's SMC and then reconnect them.
Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.
Maybe you are looking for
-
The date modified date for documents does not change
All my documents except for today and yesterday (whenever that happens to be) shows the date modified as being a random date of last year that is not when they were last modified. Does anybody know how to fix the problem so as the documents accuratel
-
BO 4.1 WEBI reports are not refreshing and FWB 00032 error while login
Hello All, First, We are not able to refresh our WEBI reports its hanging in between and throwing errors sometimes. Second, while login its giving below error. Account information not recognized: Invalid confidential channel. (FWB 00032) found releva
-
Hp laserjet p2055dn network problem
I am experiencing a problem getting my new hp laserjet p2055dn to work as a networked printer. I can print fine via usb. My girlfriend's laptop can print using printer sharing. But when I print via the router, the command arrives in the print queue,
-
MSxpsPCL6 filter failing on Win 8 with Binding and Punching
Hello, We are currently developing a print driver for Windows 8+ based on v4 model. The development and basic testing process takes place on Win 8.1 Pro machine where everything works just fine. During testing on Windows 8 Enterprise, a serious probl
-
Considering Consignment stock for planning
Hello all, My client wants to consider consignment stock ( vendor status K) also to be considered for planning purposes. That is we need to have total stock= Available stock + consignment stock. Is there any way that we can achieve this only for cer