Just downloaded latest Apple update, can't connect to internet

I downloaded the latest update for Iphone 5 and now cannot get on internet via WiFi.  Wifi is on and it shows strong signal, but I get timed out while trying to connect.  What do I need to do?
Hank

Have you reset the wireless modem to which you are trying to connect?  Unplug the wireless hotspot and wait about a minute or two, then plug it back in.  Let it reconnect to the internet (and confirm through another device that the internet is in fact working) and then see if your iPhone will connect.  If not, reset the phone by holding down the lock button (top right) and the home button until the phone turns off and the white Apple logo appears on the screen.

Similar Messages

  • HT5271 Downloaded latest Apple updates that informed me old versions of Adobe Flash Player were disabled and advised me to go to Adobe and down load latest version of Flash Player. Did that, but Flash Player won't play swf files, which it did before.

    Downloaded latest Safari update that informed me that older versions of Adobe Flash Player were being disabled and then advised me to go to Adobe and down load latest version of Flash Player. Did that, but Flash Player won't play swf files, which it did before. (Instead of opening, it comes up as a page of code).

    Hi..
    Quit Safari.
    Open System Preferences > Flash Player then select the Advanced tab.
    Click:  Delete All
    Now select the Storage tab.
    Click Delete All
    Relaunch Safari to test.
    edited by:  cs

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Just downloaded ITUNES 64 UPDATE CAN'T OPEN i TUNES ANYMORE??

    I just OK'd a download from apple for itunes, 31 Jan 2014. I get the message that it didn't install properly. I'm lost in tha sauce Bubs. I can't access my iTunes Library. What have they sent me??

    Hey erndog55!
    There is an article here that I would like for you to take a look at that can help you troubleshoot iTunes installation on your Mac:
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/HT2311
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Safari,  Software Update can't connect to Internet

    Small home network. Mac was configured as PPoE. I purchased a LinkSys Router Wireless G router. Configured it so I don't have to enter username and password for internet any more. My windows computers work fine. My Mac connects to the to the internet with Firefox. However, software update, itunes and Safari can't connect. Any thoughts

    I am having a similar problem, but only sometimes.
    Did anyone ever get back to you on this?
    No one got back to me but the problem is fixed. I made a new network connection to work with the router and then every thing was ok.

  • Problems downloading latest apple update 11.1.3.8

    This is my problem.  I have seen other posts as well about same problem.  I get as far as uninstalling Itunes and then a block up window comes up stating "Unidentified Publisher - unidentified program wants access to your computer.  The details displayed are - UPDATE - 11.1.3.8 - Apple, Inc.
    This is what started the problem in the first place.  Do I allow it to continue?  What is going on with this?
    Thanks for any advice.

    Doublechecking. Have you tried working through the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Apple devices can't connect to Internet on an iMac PPPoe DSL connection

    Hi, I am using a time capsule and have it connected to the DSL using PPPoe. I have Internet access on my iMac desktop. I have also set up the airport utility with the same configurations and password that the PPPoe required. My iPad and iPod Touch both can see and connect to the airport wireless configuration that I set up. However, these two devices cannot connect to the Internet. Can anyone shed some light on this issue? I have looked on several forums but could not find a solution. The backups are working fine. About this Mac - version 10.5.8.
    P.S. Can't wait until the Lion OS comes out!

    You want the device that is directly connected to the modem to furnish the PPPoE service.
    This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
    But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
    Open AirPort Utility - Click Manual Setup
    Click the Internet icon
    Your settings should look like this:
    Connect Using = PPPoE   
    Account Name = Your user name with your ISP
    Password = Your password with the ISP
    Verify Password
    Service Name.....leave this area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings and the TC will restart
    Either delete the PPPoE connection on your Mac, or if  you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
    If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
    Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
    Wait a moment or two, then start the modem and let it urn for a moment by itself
    Start the TC and wait for a green light
    Then start each device one at a time until the network is back up

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

    Never mind, I finally got it working, thanks!

  • Can't download latest software update on my iPad 2

    Can't download latest software update.  Settings
    Tells me its available but can't download.

    What iOS are you currently running?
    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

    I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

  • VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    hi Yojoeyo,
    i have the same problem.  did you figure it out?  it looks like no one replied to your questions. 
    Derek

  • HT204150 The latest apple update erased all my contacts! Can anyone help me please?

    The latest apple update erased all my contacts

    I tried to restore from back up but this was the first time I connected my phone to my computer so when I ran backup my contacts did not return.  When I go to mobileme.com my calandar shows up but not my contacts.  I could cry. 

Maybe you are looking for