Just downloaded logic 8.1 update from my auto updates and its done damage

Hey guys im pretty sure the update was a 8.1 or 8.0.1. whatever it was its done some kind of damage because when i play back arrangements that i had previously not had problems with the cpu usage goes into the red on the right side and the audio is crackling!
No idea how to fix this or what to do so anything would be much appreciated!

There are a lot of things you can do to optimize your system and Logic. Do some searching around and you'll find lots of suggestions.
Here are some to get you going:
Turn off your Airport card and other programs. Some people are reporting really bad performance with their Airport cards on after downloading the latest Airport update. Just turning the card off seems to do the trick.
Go to Core Audio in your Devices tab of your Audio preferences, and try playing your projects with AND without the I/O Safety Buffer. One might do better for you. Some have had good results with it checked, but for me personally it kills my performance.
In that same window try to set your Process Buffer Range to LARGE.
Download a program called Nicer.
http://www.versiontracker.com/dyn/moreinfo/macosx/9473
It allows you to set priority processing power to certain apps. Open Logic, then open Nicer, select Logic, and set the slider to HIGH. Some report no difference in performance, but some swear by this method.
Good Luck!

Similar Messages

Hi, I have an iPhone 5s. I just downloaded the Hulu Plus app from the app store and it says that I can open it while I'm in the App Store however, it won't open and the app icon is not anywhere on my actual screen. What can I do to fix this?

Hi, I have an iPhone 5s. I just downloaded the Hulu Plus app for my iPhone and in the app store it's as I can open it however when I hit open, it does not open in fact, nothing happens. Also there is no icon for Hulu Plus on my home screen so I'm confused as to what exactly to do I'm going to settings and there's only one thing that you can do which is reset. I tried that. nothing.

Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa

I just downloaded iPhoto 9.1.5 from App store. Now iPhoto does not open. Mac is an OS X, version 10.6.8. What now? by Joan E

I just downloaded iPhoto 9.1.5 from App. store. Now iPhoto does not open. What now?

Same question.
Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

I recently bought logic pro x from the app store and now i want to update to 10.0.4 and its saying it wasnt purchased here!!! sort it out apple very annoying!!

I recently bought logic pro x from the app store and now i want to update to 10.0.4 and its saying it wasnt purchased here???!!! sort it out apple very annoying!!

Although there will be many here that will sympathise with your situation, this is a user to user forum. Apple don't come here. The store (if you go to apple.com) now do real time chats. Failing that you'd need to call them to sort your issue out.
Hope this helps

I just downloaded a lot of PDF textbooks to my ibooks, and now it crashes within seconds of opening the app. I have tried restoring the iPad and just updated the iBooks to 3.1. Any ideas? I have the new iPad.

I just downloaded a lot of PDF textbooks to my ibooks, and now it crashes within seconds of opening the app. I have tried restoring the iPad and just updated the iBooks to 3.1. Any ideas? I have the new iPad.

What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs.

Update showing up in "Compliance 5 - Specific Computer" Report even after removing the update from the Software Update before creating Group and Package

So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
Thanks

But, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com

Just downloaded a new version of itunes on windows 7 and is not responding

Just downloaded a new version of itunes on windows 7 and is not responding

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just downloaded photoshop elements 7.0 to a new box and it tells me that my serial number is not valid. the adobe support team says the number is valid, but that they can't help me

i just downloaded photoshop elements 7.0 to a new box and it tells me that my serial number is not valid. the adobe support team says the number is valid, but that they can't help me

Which operating system are you using?
When you say downloaded, where did download pse 7 from?
Do you have the original install disk or original download for pse 7?
I believe the serials won't interchange between the disk version of pse 7 and the electronic down load version.

I have just downloaded adobe photoshop elements 13 on a vista laptop and realised it is not compatible.will i be able to download it again on another computer?

I have just downloaded adobe photoshop elements 13 on a vista laptop and realised it is not compatible.will i be able to download it again on another computer?

Yes. There should be a download link if you purchased it from Adobe. You can also find a download at...
PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Hello, I am trying to reinstall os x lion in my macbook pro mid 2012, from my recovery disc, and its imposible because every time I have problems to download de installer or something that is required to do that. what can I do?

hello, I am trying to reinstall os x lion in my macbook pro mid 2012, from my recovery disc, and its imposible because every time I have problems to download de installer or something that is required to do that. what can I do?

When you do get it downloaded, before you do anything else, save the Lion installer - make a copy and put it somewhere safe. you can then reuse, make a clean install and other things.
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
Yes I strongly recommend making a clone you can boot from in addition to use TimeMachine.
Carbon Copy Cloner will also offer to copy and make a Recovery partition on the 2nd drive.

I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple.

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

try general>settings>reset>reset all settings and start up as an new phone.

Just recieved an unlocked iphone 3 from a family member and can't get it to restore it because of an error message

Just receive an unlocked 3gs iphone from a family member and can't unlock the screen. Can't restore iphone because of error message.Now what do I do?

What do you mean by unlock the screen? Is there a passcode set on the iPhone? If so and this is from a family member, can that family member give you the passcode? If it has been forgotten then you must retore from recovery mode per http://support.apple.com/kb/HT1212

I just downloaded the new version of itunes to my PC and now it won't allow me to login

I just downloaded the newest version of iTunes to my PC and I went to login to my account to change some of the settings, but now it will not allow me to do so. I even went in and changed my password and it still will not allow me to log in. I was able to login to my itunes on my iPhone and my iPad, its just my PC that isnt allowing me to do so.

Hello ahermesman,
Thank you for all the information of the steps you have taken. The steps you took rule out a password issue, and it sounds like it is only happening on your PC. I found an article that will help you troubleshoot this issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Follow the steps under the section labeled "Troubleshooting on Windows." I hope this helps get you back on track!
Best,
Sheila M.

I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air because there is no more storage space available. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

Connect your devices to the computer with the USB cable (one device at a time) and import the photos via iPhoto or Image Capture.
If you have not changed any default settings on your computer, iPhoto will automatically launch when you plug in the device. Then follow the import prompts.

Just downloaded logic 8.1 update from my auto updates and its done damage

Similar Messages

Maybe you are looking for