Just downloaded LR3 trial - how do I save changes after editing?

Can't see any ref to it.
Thanks, ot

clvrmnky wrote:
areohbee wrote:
I lock my photos after editing is complete ...
The beauty of non-destructive editing and snapshots (and, now, publish services) is that, just like negatives of old, your editing never has to be "complete."
When I say "complete", I dont mean "finished forever", I mean "finished for now".
I dont know how I do it, but sometimes I end up with AutoSync turned on by accident - last time it happened I hadnt even used AutoSync recently, it turned on by itself, upon restart after a crash I think. Even if my analysis is wrong and its entirely due to operator error - the result is the same: massive inadvertent edits until I detect the condition.
Also, I make another mistake sometimes (I think its me): when fast typing, I end up normalizing exposure across a whole sh-load of photos... - still havent figured out how I do that since I dont even see a shortcut for that. Sometimes I catch it right away, sometimes not until much later.
Another frequent mistake made by newbies a lot and seasoned users upon occasion: forgetting when edits will target multiple photos vs. just one.
I could go on and on... - I love that I can tweak edit settings on a whim, non-destructively, but I dont love it when changes are made inadvertently. Locking does not keep you from editing, just reminds you that it had previously been considered "finished for now" - you can proceed to edit if you wish, or revert to locked state after viewing a detalied list of changes. "Save Metadata" has now become obsolete for me, replaced by "Snapshot & Lock". I dont know about you, but my workflow is:
- After import, spend a good while editing, until done for now (at which point I snapshot & lock), then optionally at some point in the future:
- Revisit for re-editing until done for now... If thats just one change: say Exposure +.1, and it was intended, I confirm intention then move on. If I plan to make a few more changes, I unlock until I'm done with it, then relock).
To each their own, but ChangeManager has become my all-time favorite plugin. - Gives me a very warm and fuzzy feeling knowing that my photos will never be changed inadvertently - only intended changes... - I hope Adobe builds this into Lightroom proper in Lr4, but even if they dont, I'm covered. I never realized how much stress it was trying to be ultra-careful all of the time when using Lightroom, to not make inadvertent changes, until that stress was gone...

Similar Messages

I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4) and attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and need assistance

I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4). The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices. Please advise.

I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened. Does anyone know how I can fix this? I tried rebooting my computer and reinstalling photoshop. Thank you!

i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

I just downloaded the trial version of photoshop.

I just downloaded the trial version of photoshop and now I do not know how to open it. Can someone help me???

Hi there
When you say that you can't open eps files, are you getting an error message?
Photoshop CS6 has the ability to open both .eps and .ai files. However, opening by going to File > Open... will rasterize the image - meaning that it is no long a vector so you can't scale it up and down without losing quality. To open an .eps or .ai file in Photoshop and maintain its vector capabilities, try the following:
Create a new canvas in Photoshop. Then, go to File > Place...
After selecting your file from the Place dialog box, your image will be placed into your canvas. Resize accordingly, and then hit Enter on your keyboard.
The image you just placed is a Smart Object, meaning that it has retained its vector capabilities and can be resized without losing image quality. If you ever need to rasterized this image, just right click on the layer and select Rasterize Layer.
If you are still having trouble, please post here again so that we can provide additional assistance.
Cheers!
Kendall

I have stand alone LR 5.7 and just downloaded LR cc how do I update the 5.7 catalog to CC?

I have stand alone LR 5.7 and just downloaded LR cc how do I update the 5.7 catalog to CC?

Just launch CC and point to the older catalog. CC will update it and save the original intact. Might want to keep the older catalog and LR 5.7 for awhile, once you update the catalog for CC, it cannot be read in the older version.

I have just downloaded free trial versions of photoshop, lightroom and illustrator. Photoshop and lightroom working perfectly, illustrator saying the licence has expired and I my now purchase it. Help.

I have just downloaded free trial versions of photoshop, lightroom and illustrator. Photoshop and lightroom working perfectly, illustrator saying the licence has expired and I my now purchase it. Help.

http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

I just downloaded a trial for LR. But I can't import my pictures from iPhoto? any suggestions?

I just downloaded a trial for LR. But I can't import my pictures from iPhoto? any suggestions?

Hi Mohan,
Please ensure you have followed the instructions correctly.
Adobe Photoshop Lightroom Help | Import photos from iPhoto (Mac OS)
If yes then post the screenshot of the problem.
Regards,
Sumit Singh

I downloaded the trial, how do i start using it?

i downloaded the trial, how do i start using it?

What trial? What system? What have you done so far? You need to explain better and provide more details.
Mylenium

How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?

I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
axAcroPDF1.LoadFile("myfile.pdf")
axAcroPDF1.Show();
MessageBox.Show("Showing...");
This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.

I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
Thanks again.

How do I save changes to about:config?

I change the keyword url in about:config but don't know how to save this change. If just close the tab or the browser, the old settings reappear.
How do I save changes to about:config?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

TS3276 how do I save changes in mail accounts preferences?

how do I save changes in mail accounts preferences? I add and delete mail accounts but when I close and then reopen mail, my changes are not saved, despite messages within the mail window saying that my changes are saved.

You can use an add-on to set the zoom level for all sites. For example, [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint] and [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level].

How do i save data after daughter forgetting her pass code without backing up???

How do I save data after 12 year old daughter forgot pass code before any back up???

Then there is no way, a reminder why passwords (and backups) matter. Sorry.

I just downloaded the newest update for mountain lion. After downloading and restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version

I just downloaded the newest update for mountain lion. After downloading any restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version 6.0.3, which the update was for. Does this mean that the update is iinstalled and the message was incorrect?

Brian Gallagher wrote:
I just bought the Imac on Monday, which was placed on the shelf on Saturday. Its now Thursday and I have to update the machine. Heck I haven't even bought the printer or the new desk for all this stuff....ha ha.
Good timing! Oh well, at least you shouldn't have to update again for a while. It will be nice kickstarting your Mac with the very latest System Update knowing any hiccups from 10.8.2 would have been ironed out if they were going to affect your workflow at all.
Cheers and Happy Computing
Pete

How Do I Save All My Edits

How can I save all the edits (Presets?)I made to my pics? It might come in handy to know which changes I made in the near future to maybe come back at them. I need to save the original (unedited) pics too I guess. If possible can some1 explain how to save them as a batch since I have thousands of pics.

Any edits should be saved automatically with the images. Open any edited picture and select the history panel and all the changes for that picture should be listed there. This data is contained with the other catalogue data.
All edits are non destructive and the origional image is left untouched. You can verify this by openning an image from the LR catalogue in another image viewer and see that the image has not been edited. BUT if you open the edited image in LR, the edited image will be displayed.
Your images will only be edited in LR unless you export the edited images to a new file. The new images will contain all the editting.
If you print an edited image from LR, your edited image will be printed but if you print it with another program you wil get the origional unless you exported the edited image to a new file and rinted from the new file.
If I need to use the edited images for a project, I export them as jpg's or psd's if using PS. These new exported images will be the edited versions of the selected images from this file even if opened with ay other image viewer.

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Just downloaded LR3 trial - how do I save changes after editing?

Similar Messages

Maybe you are looking for