Just downloaded the new IOS for my Iphone 3gs and now i cant get connected to the network. It only states "searching".  How do i fix this?

I downloaded the new IOS last week and my phone can no longer find the network it only states "searching" How do I fix this for the 3gs?

If you have important files that haven't been backup then you can try this by holding down power and home till it restarts and release when you see apple logo.
If you have nothing to lose, you can do a fresh restore by holding down power and home for 10 seconds and after 10 seconds release power but keep holding home till iTunes recognize it is in recovery mode and restore iphone.

Similar Messages

  • Ive just reinstalled both my pc's and now i cant recreate my sync acount cause its already in use how can i fix this

    Ive just recently reinstalled both my pc's and now i cant recreate my sync acount.
    How can i work around this ??

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • TS1398 I have a little symbol in the upper right side of my iPad that looks like a lock and now I cant get connected to the internet. Can anyone help me ( my granddaughter was playing on my iPad before this happened)

    I have a symbol in the upper right hand corner of my iPad that looks like a lock.  Now I am unable to connect to wifi.
    Does anyone know how to fix this?

    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button
    For the WiFi issue try Settings>General>Reset>Reset Network Settings. You can also power cycle your router, Unplug it for about 30 seconds and then plug it back in.

  • TS4268 I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help

    I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help

    I would go to Settings - General - Reset - and Reset Network Settings
    Try it again after the phone restarts

  • I just transfer the new software to my iphone 4 and now it has no network. Please help me

    I just transfer the new software to my iphone 4 and now it has no network. Please help me

    I don't know what really happened and why and how it 'came back to normal again' but thank you so much you guys. I'm new at this, as you may seen, and i'm portuguese, and my english is terrible. you reallyyyyy helped me, i has just almost having an heart attack. This was my b-day gift and here in portugal apple stuff are very expensive (at least for me)

  • Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    I have the same problem and haven't been able to figure it out either

  • I downloaded the new software on my IPhone 4, and now my APP store is nowhere to be found......?  Any suggestions?

    I downloaded the new software on my IPhone 4, and now my APP store icon is missing.......any suggestions?

    never mind!  I found it; had accidentally "restricted access" to it - did not realize that would make the APP icon disappear! 

  • HT6147 iPhone 4S updated to IOS 7.0.6 and now my Photo Stream doesn't synch photos to my Camera Roll - how do I fix this?

    iPhone 4S updated to IOS 7.0.6 and now my Photo Stream doesn't synch photos to my Camera Roll - how do I fix this?

    seems like your phone isn't activated properly. try doing a hard reset (hold power+home until phone restarts).
    if you have a CDMA carrier, this might not fix it for you. call the carrier and ask them to reset the activation.

  • I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

    I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

    1. Turn router off for 30 seconds and on again.
    2. Settings>General>Reset>Reset Network Settings.

  • I have keynotes on my iPad2 and keynotes remote on my iPhone 3GS and I have them both connected to the Bluetooth but my iPad states that there's no connection between them how do I fix this

    I have keynotes on my iPad2 and keynotes remote on my iPhone 3GS and I have them both connected to the Bluetooth but my iPad states that there's no connection between them to use the keynote remote how do I fix this?

    Have you tried deleting the songs from Settings?
    Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

  • Since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    Yes... remove your finger from the camera lense.

  • I Just downloaded itunes 10 and now i cant get in to the itunes store!

    I downloaded itunes 10 and now I cant get on to itunes it tells me to make sure my internet is working. ITS WORKING . So I restart the computer. Nothing . Then it tells me there is an error 11222 how can I get I working because I also want to get my brand new ipod touch working, but I cant because itunes is not working. It is really getting on my nerves!
    Message was edited by: sonicmcboom

    The prime suspects for an error 11222 are proxy issues and certificate issues. In the course of your troubleshooting to date have you worked through the 11222-specific advice from the *Specific conditions and alert messages* section of the following document?
    [iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod|http://support.apple.com/kb/TS3297]

  • I dowloaded the new os for my ipad 2 and now i cannot bookmark! Help!

    I downloaded the new os for my ipad 2 and cannot bookmark now! Heip!

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • I for got my password and now i cant get into my ipad

    hello,
    i have a ipad 32g, my boyfriend has changed my password and now i cant get in it. can you please help me.

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
      4. What to Do If You've Forgotten Your iPhone's Passcode
      5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I have downloaded the new update for Firefox 3.6 and now cannot connect to the internet. I've checked my firewall and have uninstalled and reinstalled firefox, but nothing works.

    After installing the new update for Firefox 3.6, no matter what I do, I cannot connect to the internet using Firefox. I can get on the internet using my other browsers (Google Chrome and Internet Explorer), so Firefox is the only one that doesn't work. I have already checked my firewall and have added and removed Firefox from my firewall to no avail. I've also already uninstalled and reinstalled Firefox, but so far it hasn't helped.

    I have already tried removing firefox from my firewall. Even when I do that, my firewall doesn't detect firefox and prompt me to add it. And when I manually add it, it still doesn't work anyways. I've already tried the link as well, but it has been unhelpful. :/
    I'm not sure if it matters, but a few weeks before this, I did download Microsoft Security Essentials.

Maybe you are looking for

  • How to create SR Queue and Custom User Role for technician only see which SR assigned Him/Her and Resolve

    Hi  I have created workitem SR advance and Criteria with ID [Assigned To ME] and created user role in Advance operators. But in technician Console showing which SR he/she created not service desk assigned to him/her. Please suggest... Regards Sheetla

  • Uneven Core usage on dual core processor

    Hi there I noticed today whilst doing some video encoding (.TS files to .MP4) that my Mac Mini is not spreading the load over both of the cores in my dual core processor. Whilst Core 1 is showing nearly 100% Core 2 is hardly being used. Also I notice

  • Web Broadcasting Error

    Hello Experts, Our users cannot use the broadcasting function in Web reports to distribute reports by email.  They are getting the error message that they do not have the necessary authorizations (authorization object S_OC_SEND).  Where do I assign t

  • Define parameters in a LOV

    Hi How can I change the parameters of a LOV? For example the buttons 'find', 'ok' or 'cancel'? It's possible to modify the word 'Find' that appears at the top of it? Thank you

  • Adding motion to words

    Does anyone have any tips or suggestions on how to make words tumble off of the stage, kind of like a leaf in the wind. I know this doesn't make much sense, but I'm not exactly sure how to make words look like they are blowing away. Any tips are appr