Just encountered a serious problem! Immediate help required!!

Hi there,
I've been using iTunes for quite some time now, and I've never experienced any major problems. But just today, I started up the program, and it was the weirdest thing I've ever seen. My entire iTunes library has reverted back to the way it was some point around two years ago! I am now down to 500 songs where there should be 2000+! Also, my playlists are gone, and there are ones that I deleted a long time ago. The files are still on my computer so it shouldn't be hard to get them back up there, but still I want to find out the cause of this, or if it will happen again!

I thought of that at first, but no I havn't done anything like that.
I checked around the rest of the computer to see just in case, but everything else was the same.

Similar Messages

Adobe premiere has encountered a serious problem

Hi, i have a new macbook 15" pro with retina and whenever i am working in premiere pro it crashes and comes up with a message that says "adobe premiere has encountered a serious problem"
please help, it's killing me!

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
CS6 (I don't know what number/update)
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Yes.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Mac OSX v10.7.5
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
MPEG 4 - Movie
If you are getting error message(s), what is the full text of the error message(s)?
Sometimes an error message doesn't even pop up anymore, it just shuts down. But it was saying "Adobe Premiere has encountered a serious problem and needs to shut down immediately."
What were you doing when the problem occurred?
Dragging video into the timeline.
Has this ever worked before?
I've had no problem with it up until this point.
What other software are you running?
I've shut everything else down when I'm working on this.
Do you have any third-party effects or codecs installed?
No.
Does the problem only happen with your final output, with previews, or both?
It's just when I'm working on it. I haven't been able to finish the product because of how much it keeps shutting down.

HelpMac mail sends emails prematurely while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

Help. Mac mail sends myemails prematurely while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

HP support assistant encountered a serious problem and need to close.

Hi, When i install windows 10 upgrade from windows 7 64bit on July 29, my HP support assistant works perfectly until few days it wont open and says "This application has encountered a serious problem and must close. Click OK to automatically restart this application." But it wont open. Do i need to uninstall and reinstall the problem or do i have to download HP support assistant for windows 10. Pls advice. HP pavilion DV7 quad core 1.6 ghz 64bit 8 gb ram 64bit model 4080us windows 10 upgrade 64bit from windows 7 64bit. thanks

oh yeah and when i go to uninstall it from add\remove programs when the wizard comes up and is running i get that same error and needs to close message, but i doenst effect the uninstall wizard(i dont think)........PLEASE HELP

FCE Beginner having SERIOUS problems. HELP

I am a FCE begginner and I am having a serious problem and is in need of serious help.
I am trying to capture video clips into FCE from my Panasonic video camera which is only a Standard Definition video camera using a mini DV tape.
When I connect to the FW400, it looks okay when I opened up FCE. So, I clicked FILE > CAPTURE.
I can see my video is being played in the capture window. I then click the Mark-In button. About 15 seconds later, I clicked the Mark-Out button. Then I clicked the Capture Clip button.
About 10 seconds after clicking the Capture Clip button, a message appear saying that "Dropped frames were detected during the last capture". I clicked OK and an icon appeared on the browser window.
My problem is this:
1) What can I do to prevent the dropped frames ?
2) Why is the icon appear as a red colour background with a red diagonal line ?
3) Why is it when I drag this icon into the timeline & try to play the captured video, I can only see the word UNRENDERED in blue colour appearing on the canvas ?
4) I also try to view what I have captured by putting the icon into the viewer window. And what I saw was the word MEDIA OFFLINE. Why can't I viewed what I have captured ?
Other questions:
5) After finish capturing, what is the best way to end the capturing ? When to pull of the FW400 cable ? How & when to close the capturing window ?
6) When the video was playing in the capture window, how do I fast-forward and see the video moving faster at the same time ? (I only know there is a fast-forward button but when I clicked it, the STOP button is automatically activated and I cannot see the video moving)
Thank you very much. Any help is appreciated.

Tom Wolsky wrote:
2. That's because the clip isn't really captured. It's offline.
3 - 4. Because the clip hasn't been captured.
5. When you finish capturing close the capture window. If you want you can pull the camera out or leave it connected.
6. Use the J-K-L keys. J backward, K pause, L forward. Press L a bunch of times and you go fast forward. Remember cameras are not very responsive devices. They're not like decks designed for shuttling tape.
1. What's the cameras exactly? What's the drive? How's everything connected? What settings are on the media? What settings are you using in FCE?
Thanks Tom for your answer but I apologise I don't quite understand some of the thing because I am really green in FCE. I use iMovie 09 previously.
2-3-4 What does offline means ? I mean why is the clip hasn't been captured ? I tried to follow capture clip as indicated in your book pg 59 to 66. But I think what I obtained were something like Fig 4.13 & 4.14 of page 67 in your book.
Maybe I relate what I did. I am able to see my video playing on the capture video without any problem. So, when I reach a certain part of the video I click the Mark-In button and the Time indicator on the Left hand side change from NOT SET to a certain number. After about 10 to 15 seconds I clicked the Mark Out button and the Time indicator on the Right hand side change from NOT SET to a certain number.
Then I click the video to stop. Then I clicked the Capture Clip button. After that a black screen appear with a small apple logo at the centre with the bottom saying "Cueing for Source Material" just like fig 4.11 in page 66 of your book. Then I have the same black screen but this time it says "NOW CAPTURING" just like Fig 4.12 in page 66 of your book.
After that, a message appear saying "Dropped frames were detected during the last capture". I just clicked OK and an icon appeared on the browser window. So, how come the clip hasn't been captured ? The fact that ican warn me of some dropped frames means that something must have been captured, right ? Or is it that ALL frames have been dropped ?
So, where did I go wrong ?
5) Ok thanks, I got that
6) Ok thanks, the J-K-L keys on the keyboard really works !! Yay !!
1) The model of my video camera is Panasonic NV-GS230. It is only a Standard Definition video camera using mini DV tape.
I am using a Lacie FW800 external Hardrive to store the media files.
I connect the Panasonic video camera to the iMac FW400 slot. So far, I have no problem capturing with this video camera in iMovie 09 and iMovie HD 06 using the same slot.
How do I check the settings on the media ? If you are referring to EASY SETUP, my settings are:
FORMAT: (all format)
RATE: (all rates)
USE: DV NTSC
Except for System Settings where I set the scratch disk to my external Lacie and changing the Level of Undo in User preference to 32 (just like you suggested in page 43 of your book), the rest my settings on the FCE are all default settings because I did not change anything except the 2 mentioned. Is there any setting in particular that you want to check ?
Thanks & sorry for being a real slow beginner. Really appreciate your help.
Thanks

Serious Problem. Help!!!

Hi. Im having some serious problems. Some of my programs refuse to load. None of the Microsoft Office programs will open. Omnidisksweeper wont load, nor will Windows Media Player. I used Microsoft Word this morning. Now nothing. I ran Monolingual and have no idea if that messed it up or not. Pleeeease help!

I did the same thing with the same results- only native intel apps, no rosetta. I installed in place via the disc one of the system discs and everything was back to normal.
btw, I only saved 360 mgs with monolingual- seems somewhat shy of what I was expecting- having heard there were close to 2 gigs worth on other posts regarding monolingual.

Query- Personnel Cost Planning-Immediate Help required

Hi,
I have a query.
I am trying to Assign Percentage to Cost Item ( Personnel cost Planning)- Bonus which is a dependent cost item to Direct Cost Item-Base Salary but when I run the
T. Code:- PHCPADMN the Bonus Percentage is not getting reflected and if I run the report-Plan data it is not showing any calculation of percentage.
Kindly any immediate help is highly appreciable as I need to resolve it ASAP.
Regards,
Happy

Hi Soniya
I think you should look into following links:
help.sap.com/printdocu/core/Print46c/en/data/pdf/PACMCP/PACMCP.pdf
help.sap.com/saphelp_46c/helpdata/en/fd/45a4f79d6411d189b60000e829fbbd/content.htm
Thanks
Yash

Ref: Immediate help required Approval Page problem / Task filter /

Hi...
I m facing the same problem wat Ryan has faced,..
Problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. <b>The approval notification never appears in the Recruiters approval page, but appreas in Maintenance page...and in the maintanance page i dont see any option to appove the requiistion</b> The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Raghav..

Any Help plz

JavaMail Installation Problem-Further Help Required

Hi everyone, I am trying to install and configure JavaMail API and java activation framework so that I may start to try and write a Java Mail application, the problem I am having is that I am unable to get the sample program to work, I am compiling the sample program msgsend.java but I keep getting the following errors (I am using Jbuilder 2):
Error (36): cannot access directory javax\mail.
Error (37): cannot access directory javax\mail\internet.
Error (209): class message not found in class msgsend.
Error (210): class MessagingException not found in class msgsend
Error (134): class Session not found in class msgsend
Error (134): variable Session not found in class msgsend
Error (139): class Message not found in class msgsend
Error (139): class MimeMessage not found in class msgsend
Error (141): class InternetAddress not found in class msgsend
Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (146): Variable InternetAddress not found in class msgsend
Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (149): Variable InternetAddress not found in class msgsend
Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (152): Variable InternetAddress not found in class msgsend
Error (162): Variable Transport not found in class msgsend
Error (170): class Store not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (189): class Folder not found in class msgsend
Error (195): Variable Folder not found in class msgsend
Error (197): class Message not found in class msgsend
Error (197): class Message not found in class msgsend
I have installed JavaMail and java activation framework into the following directories on my hard dirive:
JavaMail: C:\jdk1.3.1\lib\javamail-1.2
java activation framework : C:\jdk1.3.1\lib\jaf-1.0.1
My CLASSPATH is set to
C:\jdk1.3.1\lib\javamail-1.2;C:\jdk1.3.1\lib\jaf-1.0.1
I think that I have set this correctly, If not could somenone tell me what the CLASSPATH should be.
If I have set it correctly, could anyone tell me another reason why I cannot run the sample programand tell me how I may be able to fix it.
I have done a search on my computer for a file named javax\mail but it just says that javax is not a valid folder.
Any help would be appreciated
Thank You
Noel

>
Noel, I have said it twice now... your classpath is
supposed to be:
C:\jdk1.3.1\lib\javamail-1.2\mail.jar;C:\jdk1.3.1\lib\j
f-1.0.1\activation.jar
/MichaelI have set the classpath to what you suggested but when I compile the msgsend.java sample I am still getting the same errors as before, the folder where javamail and JavaBeansTM Activation Framework are still in the same location also (C:\jdk1.3.1\lib\javamail-1.2 & C:\jdk1.3.1\lib\jaf-1.0.1).
Can you tell me what is wrong?
Thanks
Noel

Is this just a LVDS cable problem? Help please

http://img.auctiva.com/imgdata/1/1/3/1/9/0/5/webimg/371736702_o.jpg
I was told that this could just be a LVDS cable problem, but I've also read it could be a logic board problem. Any help would be appreciated.

OK, the above was the report after the MacBook had been plugged in for a few days. I decided to see what came up when I started on the battery, but the first time I tried it, as soon as Safari launched (it's a login item) it went down. So I let the battery get back up to 100%, and restarted, bypassing login items. System Info reported this:
Battery Information:
Model Information:
Manufacturer:          DP
Device Name:          ASMB013
Pack Lot Code:          1
PCB Lot Code:          0
Firmware Version:          102
Hardware Revision:          300
Cell Revision:          200
Charge Information:
Charge Remaining (mAh):          4120
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          4273
Health Information:
Cycle Count:          37
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -2054
Voltage (mV):          10705
I note that those last two items are quite different, and indeed, the voltage had been reduced to < 11V. Dunno if that's significant.
I then tried launching Safari and it promptly went down. It occurred to me that the issue might involve Safari specifically in some way, so I let the battery charge back up again, de-logined Safari, and restarted. I was able to launch a few smaller applications; then I launched Backup, so far so good, but when I tried actually starting a backup, poof.
It's too bad I can't either find a MacBook to borrow to try with my battery or borrow a battery; no one I know has an appropriate model MacBook.

IPod Classic (160 gb) Serious problem, need help!

a day ago, i was playing some music (with iPod speakers), after an hour of playing i connected my ipod to headphones and resumed playng, but my ipod started "lagging" like when i pressed music it took 1 min to enter Music menu. after 15 minutes it returned to normal, and after playing some music for 30 minutes it just froze.
i was not at home so i had no computer to restore it with itunes, so i tried to reset it, when i reseted it ipod logo appeared and nothing more happened. i tried to reset it again but again, i got stuck on apple logo. i decided to let it rest for a while and i wanted battery to die and charge it back up. after an hour it started reseting itself it went on and off again but nothing more than apple logo appeared. every 15 minutes or so it did that. when battery died i recharged it but i couldnt get past apple logo.
i restored my ipod with itunes today. it gave ema an error 1453 (or sth like that) but first when i connected ipod my computer didnt recognize it. i put my ipod into disk mode and then itunes started recognising it. i restored it it kind of started normally sycnronised songs but when i disconected it, bang apple logo appeared. i tried restoring it again but the problem didnt go away. i tried scanning my ipod for viruses. (i have a good anti-virus) so after 40% of scanning was done it gave me an eror that there was no disc. and the scan button never appeared on ipod again after that...
so can anyone help me?
or am i doomed? oh and by the way i bought my ipod 1 year ago and i had dropped it only once throughout the whole year (it was 5 months ago) and nothing happened to it.

I've had that problem before, reboot your pod. hold down the center button and the menu button at the same time till you see the apple logo. That should clear it up.

Immediate help required with decode statement in scheduling jobs

Hi
Iam trying to change a job that runs my procedure using dbms_job.. Here is the output I got.
Can someone help me why this is giving me errors.
<code>
SQL> exec dbms_job.next_date(395,decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),-1,'trunc(sysdate) +18.5/24',1,'trunc(sysdate)+1+6.5/24'));
BEGIN dbms_job.next_date(395,decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),-1,'trunc(sysdate) +18.5/24',1,'trunc(sysdate)+1+6.5/24')); END;
ERROR at line 1:
ORA-06550: line 1, column 30:
PLS-00204: function or pseudo-column 'DECODE' may be used inside a SQL
statement only
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
</code>
Thanks in advance

A possible solution:
declare
v_next_varchar varchar2(30);
v_next_date date;
begin
select decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),
-1,'trunc(sysdate) +18.5/24',
1,'trunc(sysdate) +1+6.5/24'
into v_next_varchar
from dual;
execute immediate 'select ' || v_next_varchar || ' from dual ' into v_next_date;
dbms_job.next_date(22, v_next_date);
commit;
end;Bye, Aron

SERIOUS PROBLEM - need help! flashing lights!

my ipod has turned into a strobe light machine.
it started when my ipod's battery died. i tried to charge it through a usb hub and power cable. that is, i powered the usb hub directly from a wall socket, then used the ipod cord plugged into the hub to charge it.
*the battery fried*
i went to batteries plus and got a replacement battery. i installed it myself. about a minute later, the ipod heated up veyr rapidly. i feared it would melt the hardrive so i disconnected it and reconnected it. i did this about a dozen times, each time it still got dangerously hot.
then i broke the ribbon cable to the battery.
i didn't do anything to the ipod after that for about 6 months.
i got a new battery today. i retried it, everything worked fine. no heating up. i went to go charge it by plugging it into the computer and itunes popped up saying that the ipod was corrupted, i may have to restore it. so i hit restore, and then it said it couldnt restore because of an *unknown errpr*.
dammit.
the screen had gone a dark grey. i disconnected the battery and reconnected it. the ipod hissed - like a cockroach or somthing - when i did and it began to flash on and off again like a strobe light.
whiteblackwhiteblackwhiteblack thats all it does.
this is the same problem that happened when i fried the first battery
now im INCREDIBLY frustrated. imi praying that someone can please help me!!!!!
thanks and sorry for the long post. this is my first one by the way.

Exactly. Try http://www.iresq.com or http://www.ipodmods.com or one of the other 3rd party repair sites.

I have serious problem,please help me.....

Hi all;
i have a big problem.... i can't connect to my database orcl2. whenever i write
c:>sqlplus "/as sysdba"
it does not do anything. The following row is
c:>
if i write c:>sqlplus /nolog
it goes to another cmd screen
sql>..................
but i get errror while sql>conn sys@orcl2 as sysdba
tns could not resolve service name... i'm in trouble.. whenever i attempt to do;
i looked in TNSNAMES.ora file, and host name with sid names are true.It is no doubt that there is no problem there.... please i have to connect to my database as soon as possible.Thanks for your help now on..Best regards......

You can use tnsping to "ping" the listener, or something else that occupies the port (with various results), but it will not tell you if a service/sid is available or not on that listener.
C:\>tnsping (description=(address=(protocol=tcp)(host=localhost)(port=1521))
(connect_data=(sid=nothing_here))) 3
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 13-NOV-2006 21:56:31
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Attempting to contact (description=(address=(protocol=tcp)(host=localhost)(port=1521))
(connect_data=(sid=nothing_here)))
OK (30 msek)
OK (0 msek)
OK (10 msek)Message was edited by:
orafad

Dynamic ALV Layout - Immediate help required

I have a Summary and a Detailed ALV layout screen. Now when i get to detailed screen from summary screen; I choose a layout say L1 here. Then I press F3(back) this would get me back to the summary screen.Now my requirement is when i click on detailed view from here now; the previously chosen layout L1 needs to be used for the report output. Can this be done?
Note : This needs to be done without choosing layout from selection screen.
Require help urgently on this.
Regards
Swamy

Yes you can do that.
When you are backing out of detailed screen, store the name of the layout in a variable. When you are coming in the detailed screen again, pass this layout name in the IS_VARIANT-LAYOUT variable along with other values.
Before backing out of the detailed screen you can get the layout chosen using the function REUSE_ALV_GRID_LAYOUT_INFO_GET or calling the method GET_FRONTEND_LAYOUT of the class CL_GUI_ALV_GRID, depending on how you are displaying the report.
Regards,
Ravi
Note - Please mark all the helpful answers

Just encountered a serious problem! Immediate help required!!

Similar Messages

Maybe you are looking for