Just FYI, new blog post "Deploy Border Gateway Protocol (BGP) with the RRAS Multitenant Gateway"

This is just FYI about the new blog post for Windows Server 2012 R2, "Deploy Border Gateway Protocol (BGP) with the RRAS Multitenant Gateway," at
http://bit.ly/OfDkty
James McIllece

Hi,
Thanks for sharing and it would be greatly helpful to anyone who has requirements for that.
Best regards,
Susie

Similar Messages

  • Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell"

    Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell" at
    http://aka.ms/le85n3
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

  • Just FYI, new blog post "Windows Server Networking Resources"

    Hi there -
    Just FYI, new blog post "Windows Server Networking Resources" at
    http://aka.ms/vrigwx
    Thanks -
    James McIllece

    Hi James,
    Thanks for the sharing.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery"

    Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery" at
    http://aka.ms/Sqatv1
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing!
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Just FYI, new blog post "New Posterpedia Content Now Available"

    Just FYI, new blog post "New Posterpedia Content Now Available" at
    http://bit.ly/1IYdFMA
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

  • Just FYI, new blog post "Windows Server 2012 Server Certificate Deployment Guide Now Available in TechNet Gallery"...

    ...At
    http://gallery.technet.microsoft.com/Windows-Server-2012-Core-e0970aa7
    James McIllece

    Hi,
    Thanks for your sharing, the guide will very helpful for the network deploy and troubleshooting!
    Best regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "New Version of Posterpedia Now Live in Windows Store"

    ...At http://bit.ly/1kMe7S6
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing! This is a greate guide which can give us a global network view.
    Best Reagrds.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "Windows Server 2008 Networking Guides Now Available in TechNet Gallery for Download"

    ...At http://aka.ms/Siafr9
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing! This is a greate guide which can give us a global network view.
    Best Reagrds.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "New Windows Server Cloud Networking Technologies Documentation"

    ...At http://aka.ms/b2dtsw
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing .
    Best Regards,
    Elton JI
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Presario cq57 just had new mother bored and now there a problem with the sound.

    I just got my the laptop back today , after sending it off for repair because it would not boot up so they put a new mother bored in.
    but now when i play music or go on bbc iplayer online , when i play the music of video, the sound starts juttering or staying in one part , this is very iritating and i got this laptop for a present for my 21st only had it 2 months today yet after having it fix i am still having problems with it.
    does anybody now how to fix this problem and what i should do?

    The newest iTunes won't work unless iTunes and supporting applications are completely uninstalled first.
    After you have uninstalled everything Apple tells you to (http://support.apple.com/kb/HT1923) using the uninstall feature in the Control Panel,  these are the folders you may need to manually delete the contents of:
    C:\Program Files\Common Files\Apple\Mobile Device Support
    C:\Program Files (x86)\Common Files\Apple\Mobile Device Support (if it exists)
    You have to delete the contents of the Mobile Device Support folders before you can delete the Mobile Device Support folders or you will get an error message.
    If you don't have the Mobile Device Support folder in either location, reboot and try to install the software.  This has worked for lots of people so far.  I hope it works for you, too.

  • Just FYI, new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide

    New! Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide
    This new guide is available on the Web at
    http://technet.microsoft.com/en-us/library/dn641937.aspx. It is also available for download in Word format at TechNet Gallery at
    http://gallery.technet.microsoft.com/Windows-Server-2012-R2-37eb8e17
    If you work for a Cloud Service Provider (CSP) or an organization that's planning on deploying cloud technologies, you might be interested in the new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide.
    You may already know that in Windows Server® 2012 R2, the Remote Access server role includes the Routing and Remote Access Service (RRAS) role service. (It also includes DirectAccess and Web Application Proxy, however those role services will not be discussed
    in this article.)
    The new deployment guide demonstrates how to use Windows PowerShell to deploy RRAS as a virtual machine (VM)-based multitenant software gateway and Border Gateway Protocol (BGP) router that allows CSPs and Enterprises to enable datacenter and cloud network
    traffic routing between virtual and physical networks, including the Internet.
    You can use the gateway with VM networks by using either Hyper-V Network Virtualization or Virtual Local Area Networks (VLANs) - but using Network Virtualization is recommended due to VLAN limitations such as difficult management and a limited number of
    available VLAN IDs.
    If you're using System Center Virtual Machine Manager (SC VMM), you can use SC VMM to deploy Windows Server Gateway; however even if you are using SC VMM, you can manage the gateway with the same Windows PowerShell commands that are used for the RRAS Multitenant
    Gateway. (Some Windows Server Gateway features are configurable only with Windows PowerShell.)
    For information on deploying Windows Server Gateway with SCVMM, see the Test Lab Guide: Windows Server 2012 R2 Hyper-V Network Virtualization with System Center 2012 R2 VMM, at
    http://www.microsoft.com/download/details.aspx?id=39284
    With the RRAS Multitenant Gateway, you can create site-to-site VPN connections between your tenants' physical locations and your cloud datacenter. You can also provide tenants with point-to-site VPN connections that allow tenant Administrators to access
    and manage their VM resources from anywhere. The RRAS Multitenant Gateway also allows you to configure Network Address Translation (NAT), so that tenant VMs can access the Internet, and you can deploy dynamic routing by configuring the gateway and tenant gateways
    with BGP.
    Thanks -
    James McIllece

    Hi,
    It is very useful , thanks for your sharing .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I watched the new itunes tutorial, and if you double click on the  blank part of the bar that says music, videos, apps, etc, a button will show with your ipod's name.

  • I just got new iphone 4 but it tells me to restore the phone wen i plug in my computer.. then half way thru the restoring on the "firmwear" part it stops an says error "9?? wats the go there?? its driving me insane...

    i just got new iphone 4 but it tells me to restore the phone wen i plug in my computer.. then half way thru the restoring on the "firmwear" part it stops an says error "9?? wats the go there?? its driving me insane...

    Let's first define what "new" means. Was it purchased from Apple or your authorized carrier, and it came in a shrink wrapped box? Or is it only new to you, and you don't know its history?
    Assuming it truly is a new, never used phone, Error 9 means that the USB connection to the phone is intermittent. Do the following:
    Make sure you have the latest version of iTunes (10.4) - if not, download and install it from htp://www.apple.com/itunes
    Reboot your computer
    Disable your antivirus and firewall software
    Disconnect all USB devices except keyboard and mouse
    Connect the cable to a USB port directly on your computer, not to a hub; do not connect the other end to the phone yet (If your computer is a desktop or tower and has ports on both front and back us a port on the back)
    Launch iTunes
    Connect the phone to the other end of the cable
    If the phone is recognized in iTunes proceed with the Restore
    If the phone is NOT recognized by iTunes:
    Disconnect the cable from the phone (leave connected to the computer)
    Hold the HOME and SLEEP buttons until the screen goes blank, then IMMEDIATELY release the SLEEP button but continue holding the HOME button
    Connect the cable to the phone while holding the HOME button
    Wait for iTunes to recognize the phone, then release the HOME button (this may take several minutes of holding)
    If you still have a problem after these steps take the phone to Apple for exchange.

Maybe you are looking for

  • BP new field update is not possible

    Hi Experts, I work in CRM 4.0 which is connected to R/3. I have created a new BP field with EEWB. I would like to replicate this field into a standard R/3 field. Without any enhancement the new field is replicated in "Insert" mode but in "Update" the

  • Motion & Unexpected Quits

    Well, I'm sure there's something that has transpired to affect my machine in the last few days since the advent of OS 10.4.4. I upgraded my Quicksilver machine to a dual 1.73MHz Sonnet Duet processor, an ATI 9800 Mac Edition (256MB) AGP video card an

  • Mac OS 10.6 and ID 2.0

    Bacjgroiund: My old trusty Mac crashed and I now have a new iMac running OS 10.6 (Snowleopard). Problem: After what appears to be a successful insallation when I try to open InDesign I get an error message -- InDesign 2.0 Unexpectedly Quit. Question:

  • Error popping up even after VI stopped

    Hi, i am running to LabVIEW code, which is already developed. A error window is popping up "VCAN Error: 75" after pressing Quit/stop button in that VI. even after the clicking the OK/cancel buttons, the error pop up is reappearing. i observed that th

  • Animate Text using AS3

    Does somebody know how to animate text (mx.controls.Text) for color change? Thanks