Just FYI: SAP Determines Activation Sequence by the following...

The Activation Sequence of objects in transports is determined by the sequence of the Values Stored in the Data Dictionary Domain Object "RSTLOGO".

Thanks for sharing. I didnt know about this object before but was sure there has to be a sequence. But for some reason, some of my transports used to fail when I wasnt using a transporting sequence. But thanks for sharing anyway.
Thanks,
Voodi.

Similar Messages

Activation failed with the following error: 0xC004B011

I just purchased the Office 365 bundle from Costco and I am using the various office products to do some work. I keep getting a request to activate the software, but when I try I receive the following error message: "activation failed with
the following error: 0xC004B011"
How do I activate the software and fix the issue? It also hows "The activation server determined that your computer clock time is not correct. You must correct your clock before you can activate." What time zone do I need to be set
to activate the software?

I had this issue and fixed it:
Just click the clock, and choose Change Date & time settings > Date and Time > Internet Time > click Change Settings > and finally click UPDATE TIME. I changed the server to time.windows.com and that's
it. It took me two attempts at clicking update time and it then said time updated successfully. Activation works fine afterwards.

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7. Basically I have an iphone 4 and upgraded to v7 and most recently v7.

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7.
Basically I have an iphone 4 and upgraded to v7 and most recently v7.0.2. When I am on calls the phone started to beep and vibrate and sometimes change the call to speaker. It seems to be that the screen is sometimes active whilst on calls and so my ear is actually pressing the buttons and hitting numbers or changing it to speaker phone. It has also cancelled a call a few times.
This is extremely annoying and makes every call a worry.
Any ideas of how to solve this problem?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

I have just installed 10.7 Lion and get the following message when trying to open a Microsoft Office for Mac 2004 product "You can't open the application Microsoft Entourage because PowerPC applications are no longer supported." What needs to be done ?

What needs to be done to regain my Microsoft Office for Mac suite that I lost when I installed Mac os 10.7.3 Lion upgrade?

boyfromoz wrote:
Shootist007 wrote:
Or you could just wipe out Lion and restalled Snow Leopard. Then when you are in the market for a new computer, desktop of notebook, buy something other then Apple.
why would you say things like that here? if you are a windows one then stay there. but you are not polite or helpful and if can't use Apple i wonder why you would come here to tell all about your sad story. I don't understand that it has nothing to do with question asked.
I own, or should I say have owned, several Apple products. Including a new MBP.
I also use Windows.
I will say anything I like in an effort to help people overcome problems they are having with Mac's and computers in general.
Being a Apple Fanboy is not required for membership on this forum or trying to help other Mac users.
And just how is suggesting to remove Lion and to go back to Snow Leopard not helping the OP in his quest to make his already owned and paid for MS Office software work? If it is isn't broken stop trying to fix it. Snow Leopard is a fine OS. Lion is still in Beta, only Apple hasn't told anyone. And yes I run Lion on my new MBP but I also have a partition with Snow Leopard on it.
Thank you and have a great day.

SAP Query:How to add the following tables

Hi,
I want to build a query by joining Tables BSIK, BKPF and BSEG .but when i add BSEG it does not allow to join because its a cluster table. I couldnt find any logical database having these three tables in it. Can you kindly advice how it is achievable?
Thanks,
Faisal

You are trying to add one of the 2 biggest tables in the system.
Try to do a select in bkpf first and then either use for all entries or cursor approach for BSEG/BSIS.

Failover, SO activation sequence and Log

Hi
Wud u please clarify my following doubts :-
1. Failover
If a partition carries 3 failover service objects-. A, B & C - and if service object A fails, I
believe that the whole partition in replicated and reinstantiated. If so what happens to the
non-failed objects in old partition and the newly created clones of those objects in new partition?
Which one wud be used while referenced ?
My unerstanding is that it manages failover by partition than by objects so that failed partiton is
activated on some other assigned nodes.
2. Service object activation sequence
How the activation sequence of service objects are determined ? I have a strange problem. One of my
service object (in its init method) try invoking a method on another service object; but gives
"Attempt to invoke a method on a NIL object" exception. I inserted a loop above this line as
DO WHILE thisSO = NIL THEN
END DO;
flag = thisSO.GetStatus();
Still the exception occurs. The called service object reads from a flat file to populate its data
members. Can I change the activation sequence of service objects ? Both the service objects, talked
about here, belongs to same partition and are of USER visibility type.
3. Partition Log
The partition log generated overwrites the existing file if I specify a file name name using -fl
flag at command line. Is there anyway that I can make it to append to existing log ?
ThanX.. @nthoz
Anil Thomas Samuel(Team Leader)|Voice:(91 - 80)3322139,3324313,3322337
IBC Solutions India Pvt. Ltd. |Ext:40
#2201, 11th Main, A Block |Fax:(91 - 80) 3321369
2nd Stage, Rajajinagar |Web Pager:[email protected]
Bangalore, India - 560 010. |Visit us @ http://www.ibcweb.com
URL:http://members.tripod.com/~anthos/index.htm
***************************** Day's Quote *****************************
Underneath the table Greebo dozed on his back with his legs in the air. Occasionally he twitched as
he fought wolves in his sleep. - >From Witches Abroad by Terry Pratchetteck-up: who am I, where am
I, who is he/she, good god, why am I cuddling a policeman's helmet, what happened last night?stle.
Besides, it'd be sunrise soon. It's red eyes glinted as it looked up at Magrat's window. It tensed-
- From Witches Abroad by Terry Pratchettwho knew neither victory nor defeat." - Theodore Roosevelt
***************************** Day's Quote *****************************
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hi
Wud u please clarify my following doubts :-
1. Failover
If a partition carries 3 failover service objects-. A, B & C - and if service object A fails, I
believe that the whole partition in replicated and reinstantiated. If so what happens to the
non-failed objects in old partition and the newly created clones of those objects in new partition?
Which one wud be used while referenced ?
My unerstanding is that it manages failover by partition than by objects so that failed partiton is
activated on some other assigned nodes.
2. Service object activation sequence
How the activation sequence of service objects are determined ? I have a strange problem. One of my
service object (in its init method) try invoking a method on another service object; but gives
"Attempt to invoke a method on a NIL object" exception. I inserted a loop above this line as
DO WHILE thisSO = NIL THEN
END DO;
flag = thisSO.GetStatus();
Still the exception occurs. The called service object reads from a flat file to populate its data
members. Can I change the activation sequence of service objects ? Both the service objects, talked
about here, belongs to same partition and are of USER visibility type.
3. Partition Log
The partition log generated overwrites the existing file if I specify a file name name using -fl
flag at command line. Is there anyway that I can make it to append to existing log ?
ThanX.. @nthoz
Anil Thomas Samuel(Team Leader)|Voice:(91 - 80)3322139,3324313,3322337
IBC Solutions India Pvt. Ltd. |Ext:40
#2201, 11th Main, A Block |Fax:(91 - 80) 3321369
2nd Stage, Rajajinagar |Web Pager:[email protected]
Bangalore, India - 560 010. |Visit us @ http://www.ibcweb.com
URL:http://members.tripod.com/~anthos/index.htm
***************************** Day's Quote *****************************
Underneath the table Greebo dozed on his back with his legs in the air. Occasionally he twitched as
he fought wolves in his sleep. - >From Witches Abroad by Terry Pratchetteck-up: who am I, where am
I, who is he/she, good god, why am I cuddling a policeman's helmet, what happened last night?stle.
Besides, it'd be sunrise soon. It's red eyes glinted as it looked up at Magrat's window. It tensed-
- From Witches Abroad by Terry Pratchettwho knew neither victory nor defeat." - Theodore Roosevelt
***************************** Day's Quote *****************************
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

SAP HR Active Sync Issue

Hi,
I encountered SAP HR Active Sync issue: The IDM seems can't receive the IDOC but SAP side says the data already passed to port OK.
I enabled the verbose mode of the Active Sync logs and it is repeating:
2009-06-04T17:07:08.750+0800: IDOCs of message type HRMD_A will be processed.
2009-06-04T17:07:08.750+0800: {jco.server.gwhost=10.153.3.20, jco.server.progid=IDMRFC, jco.server.gwserv=sapgw01, jco.server.trace=1, jco.server.unicode=1}
2009-06-04T17:07:08.750+0800: Started IDocServer (IDMRFC)
2009-06-04T17:07:08.750+0800: Done initializing SAPHRActiveSync resource adapter.
2009-06-04T17:07:08.750+0800: SARunner: loop 0
2009-06-04T17:07:08.812+0800: Started, paused until Thu Jun 04 17:07:08 GMT+08:00 2009
2009-06-04T17:07:13.812+0800: Pause completed
2009-06-04T17:07:13.843+0800: Polling
2009-06-04T17:07:13.843+0800: Poll complete.
2009-06-04T17:07:13.843+0800: SARunner: loop 1
SAP side transaction WE02 shows the IDOC:
IDoc sent to SAP system or external program: Data passed to port OK
SAP HR Active Sync resource reference says:
1. Enter transaction code PFAL.
2. Insert the Object Type P for person objects.
3. Enter an Employee's ID for the Object ID or select a range of employees.
4. Click Execute.
5. Ensure that the status is set to passed to port okay.
6. The IDoc has been created. Check the Active Sync adapter log file to verify that
an update was received.
Now why I can't see the IDOC logs in the active sync adaptor log file?
Thanks!

Hi Wushilin,
Did you ever find a solution to this?
Thanks

Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

Hello Community
    "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
domain controller using Active Directory and the UI.
    In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
forest trust with Forest-Wide authentication so that a different forest user(s) or
group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
    But also forestB needs to create a "One-way, Incoming" forest trust so that
I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
in my "forestA" or I can
add user(s) as "domain user(s)" from “forestB” into my "forestA".
    The problem is that when I right click the global group in my forestA and then
properties, when I click "Members" and then the "Add" button when I type
"forestB\username" I get an error message from Active Directory stating:
    "the following object is not from a domain listed in the Select location
dialog box, and is therefore not valid: forestB\username".
    Am I doing something wrong when creating the one-way trust in my
“forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
    Or could I possibly need to select "Change Domain" or "Change Domain Controller"
before adding the users or Groups to my forestA from forestB?
    That is why I am asking
how do you add an Active Directory user from one forest into another forest?
    Thank you
    Shabeaut

Hello Denis Cooper
    That is the end result.
    What I was trying to do was that I was trying to
bring in the user(s) and group(s) from “forestB” into
my “forestA” Global group.
    Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
into the domain local groups on my member servers in my forestA.
    So since the error message is:
"the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
Does your response
mean only Global group(s) from forestB not domain user(s) from forestB have
to been added to domain local groups in forestA?
Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
how without getting the above error message?
Thank you
    Shabeaut

Error The following product(s) could not be activated

Can somebody help me, I received this error while I'm trying to activate the said product.
NI Product Activation
Step 2: Review Your Confirmation
Error The following product(s) could not be activated
National Instruments is unable to provide activation codes for the following items in your request. Possible causes could include: serial number was not found; serial number was found, but does not match feature/version; serial number is found, but is not yet active.
Serial Number Product Version
xxxxxxxxx Vision Acquisition 8.6
Serial number is not found, is found but does not match feature/version, or is found but not yet active

Time to talk to NI.
Sometimes corporate firewalls can cause problems with activations.

SAP standard report for showing the stock at customer location

Hi All,
Can any one let me know if there is a standard SAP report which can show the following
Stock at the customer location on a monthly basis
I tried the following t-code - MB58 but that doesnt have the
From date - Till date
Any pointers on this one will be really helpful.
Regards,
Pandi

Hello,
MB52   -   List of Warehouse Stocks on Hand
MB53   -   Display Plant Stock Availability
MB5B -    Stock for Posting date.
Prase

Bunch of ERRORS after installing SAP BPC 5.1 for the first time

Hi guys
Our basis guy is installing SAP BPC 5.1 for the first time. After the installation, I can get into SAP BPC - Administration screen but I get a lot of errors when I try to do some changes. Some of them are -
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
    Error on uncompressing file: Error : ActiveX component can't create object.
2. Create dimensions -
    Split File Error
3. Delete dimensions -
   OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
4. BPC for Excel (I am logging in as a system admin)
    The dimension information file cannot be created. There may be a network or security issue.
    Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
I am sure I will get a lot of errors once I start playing with the configuration.
Please comment.
Thanks,
Ameya Kulkarni

Hi Ameya Kulkarni,
I sorry I wrong type something,
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
Error on uncompressing file: Error : ActiveX component can't create object.
==>
You should do this step such as:
1. copy file "XceedZip.dll" into the directory SAP BPC
2. register that file into the register window using sintaks: "regsvr32"
3. If the successfully message box appears, You should open the MS.Excel or SAP BPC administration
2. Create dimensions -
Split File Error
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
3. Delete dimensions -
OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
4. BPC for Excel (I am logging in as a system admin)
The dimension information file cannot be created. There may be a network or security issue.
Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
==>
You must solve the problem no.2&3 because you should add new user through SAP BPC Administration for the application.
I wish My Suggestion can help you.
Regards,
Wandi Sutandi

I need standard reports on the following

Hi,
I need standard SAP reports (if any) on the following topic
Sales Order On Hand
Display Order On Hand
Incomplete Order for CUSt & Mat
Deliveries To Be Confirm

Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regards,
Rajesh Banka
Reward points if helpful.

Comments on the following ERP terms

hi
I was going trhough onw of the SAP presentation and came across the following terms
a. High levels of integration
b. business transformation
c. Process re-engineering
I need to knwo are all these the same and can some one explain it to me with a example .
I would also like to have best practice for purchasing(MM),equipment maintainance(PM) and Payments(FI)
Regards

You can find <a href="https://websmp209.sap-ag.de/bestpractices">best practices</a> on service marketplace. There is an excellent set of helps for SCM, Chart of Accounts and the baseline packages cover: Organizational structure
Basic financials
Basic controlling
Basic materials management
Production
Basic sales and distribution
You can find our other terms by doing an advanced search on SDN, if you like.
Here's an article that mentions <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee957e5-0201-0010-9c83-fe14a43cd04a">business transformation</a> in the context of BI.
This doc is on high levels of
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1935fae4-0901-0010-3baf-84a1915f0060">integration</a>. And lastly, this article speaks of
[url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2ca9ef81-0d01-0010-31bc-f984ad99ddeb]process re-engineering [/url].

I have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Just FYI: SAP Determines Activation Sequence by the following...

Similar Messages

Maybe you are looking for