Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Similar Messages

Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
http://aka.ms/xb9l0w
Thanks -
James McIllece

Hi,
Thanks for your good sharing.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?

i bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?
plz help me

Hi Jaimie,
To install Windows via Boot Camp you will need to have a copy of Windows on a physical dvd disc.
If your purchase provides you with an ".ISO" file then you can simply burn this to a DVD and then follow the standard Boot Camp installation instructions.
Boot Camp instructions: http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
If you get stuck, just let me know the website you purchased Windows 7 from and I might be able to help you out.
Cheers

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the same result. Any advice?

Try downloading the offline installer from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
Make sure you follow the Very Important Instructions on that page.

Removing Server 2000 DC and adding Server 2008 DC.

Removing Server 2000 DC and adding Server 2008 DC.
From: Server 2000 Sp4 (not leaving in place, no plans to demote)
To: Server 2008 Sp2 (will be a single DC and hold Global Catalog)
Single forest domain. Only one DC.
Problem: The old server 2000 is still a primary DC and the new server 2008 is not taking over.
Completed the following tasks:
NIC binding (connected NIC at top of list on new server)
New server is also DNS server. This role is working and it points to itself 127.0.0.1 and clients have been moved to use the new server for DNS, they are working.
New server has some shared folders. Clients are connected and this is working until we remove the old server, then they cannot authenticate to the mapped drive.
Both servers show the role of Domain Controller
Adprep /forestprep and /domainprep and /domainprep /gpprep were run on the server 2000 (as it was the existing DC) with a successful message. (not sure if enough time was allowed for replication)
All five Flexible Single Master Operations (FSMO) roles were transferred using GUI.
Schema Master, Domain naming master, Infrastructure master, RID master, PDC Emulator.
And have been verified. All roles transferred and the new server 2008 and new server is also the global catalog.
Then to verify new server is handling the role we unplugged the Ethernet cable from the Old server 2000, then went to client stations and re-started them and they would not find the new DC and connect to it.
On the new server when we opened active directory users and computers the domain did not appear.
Verified in DNS manager the A record and reverse pointer were correct.
For some reason the new server is looking to the old server. Even though all roles are moved over and DNS appears to be setup correctly it won’t exist independently.
What’s missing?
If something was missed or performed wrong, do we have to remove the roles and start from scratch? Or can we re-run adprep and walk the steps again leaving all as-is?

Hello,
as first step please post an unedited ipconfig /all from the old and new DC/DNS server and one problem client.
It seems that your installation from the new DC wen't well and as described in
http://msmvps.com/blogs/mweber/archive/2010/02/06/upgrading-an-active-directory-domain-from-windows-server-2000-to-windows-server-2008-or-windows-server-2008-r2.aspx Just check again yourself.
A DC should NEVER be shutdown or just disconnected from a domain, it MUST be demoted correct, as you ruin into replication errors in the event viewer without that steps and you will never be able to install a additional DC with using the same name.
See the end of my article about removal steps.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

HT202157 just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so !

just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so ! How can I get the iMac and apple tv to sync the itunes ? i have a internet connection between them , I have signed in to the itunes store on the apple tv and it shows that the apple tv is sharing my library from the IMac , but it wont sync and the apple tv has no content !

Welcome to the Apple Community.
The Apple TV (with the exception of the Apple TV 1) does not sync, it streams everything from your library on your computer or from the internet.

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
I get this error message every time:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-05-28 02:28:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.4.130416
Crashed Module Name: Microsoft Word
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x00938638
Blame Module Name: Microsoft Word
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x00938638
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
I tried to remove the plist files, but it hasn't worked! Please help!

What version of Microsoft Office for Mac do you have?
Pete

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Sorry, don't know what you are asking. You have an old iPad Mini 3 and a new iPad Mini 3? How did you set up the new iPad? Did you restore it from a backup of the old iPad? What photos are you not seeing?
Cheers,
GB

I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?

I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?

http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently. Can I get my document with all my information back?

I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently. Can I get my document with all my information back?

I suggest the easy stuff first:
1) quite Numbers and restart Numbers
2) reboot the computer
After that try opening the same document in another user space

TS1702 I just updated numbers to newest version and found that numbers quits to home screen when I tap the information icon on "function help", it starts to load the "help" then quits this happens on both my ipad3 & iphone5

2/3/14: I just updated numbers to newest version and found that numbers quits to home screen when I tap the information icon on "function help", it starts to load the "help" then quits. It happens on both my ipad3 & iphone5. I tried restarting the devices but it didn't help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

Will SCCM 2012 R2 , SCOM 2012 R2 and SCDPM R2 2012 support SQL 2012 AlwaysOn Availability Group ?

Hi,
It is listed here:
http://technet.microsoft.com/en-us/library/dn281933.aspx
Configuration Manager 2012 r2 and DPM 2012 r2 does not support AlwaysOn.
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Unidentified network" with Server 2012 R2 and windows 8- Domain & NIC teaming

i have problem with my network ,before that i had just my domain but now some servers specially win 2012 detect a network (name:network 4)
my 2012 windows server cannot be joined to doman also windows 8,but sometimes this problem solves without any troubleshooting and i can join again
what can be problem
S.Sanadi

Hi S.Sanadi,
According to your description, my understanding is that “Unidentified Network” causes problem with joining domain, and this problem will be resolved automatically.
If there is no default gateway or the default gateway is useless, the network will be identified as unknown. Check to see if the IP configuration is correct when the network identified unknown. Open command prompt and type:
Ipconfig /all
If the parameter is correct, try to ping IP address of default gateway and check to see if it works well.
Besides, if the connection should be identified as a Domain network and is not, then the likely causes are failure to contact DNS servers or domain controllers on that interface. Ping the IP address of DNS server and DC to make sure that these resources
are available.
Regards,
Eve Wang

DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
Matthias

Hi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

Similar Messages

Maybe you are looking for