Just got a time capsule with my airport base station.

I am trying to use it as a backup but keep getting an error message, i have other backups using time machine on my imac, but on different hard disks that are all dis-mounted. I want to use the Time-capsule as my main backup for our different mac's. not sure what to do?

Is the TC available as a TM target?
You sometimes need to reset the TM to allow a new network destination to be chosen.. but it will usually work with multiple destinations .. you just need to select where you want the backup.
Is the TC plugged into the airport extreme by ethernet? If not, I would certainly do that.
Reset it and run the airport utility 5.6 from Lion to do the setup.. v6 in lion does make a mess of this often enough we recommend don't use it.
Apple made a version of the utility from previous versions available to Lion since v6 was featureless.
http://support.apple.com/kb/DL1482
Ignore what it says .. just load it into the computer and use that instead.

Similar Messages

  • Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

    Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

    There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

  • Time Capsule with (2) AirPort Express connection problem

    I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

    The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
    The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
    Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

  • How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

    I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

    The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
    You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
    Is your broadband cable or adsl or fibre or ???
    If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
    Setup the TC in DHCP and NAT mode.. (depending on broadband type).
    You must reset the TC to factory to do the setup.. no files are lost at all.
    Here is my current recommended setup.. with Yosemite life has become harder than ever.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Here is why Yosemite has fundamental issues.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

    how do you set the airport time capsule as the primary base station rather than as a network client?

    The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
    So, the first logical question here would be......
    What is the make and model number of the device that you call your "modem"?

  • Time Capsule Disappears from Radius Base Stations List after adding

    I'm running a Mac Mini with 10.7, Lion Server, and Server Admin Tools along with a Time Capsule 802.11n (1st Generation).
    After I add the base station (you can see my steps below) the base station restarts and then disappears from the list. The base station is then ignored:
    Sat Jul 23 11:47:41 2011 : Error: Ignoring request to authentication address * port 1812 from unknown client 10.0.1.1 port 65530
    This is because it's not listed as a known base station in the radius config (as far as I can tell). No other errors (than the one above) listed in either radiusconfig Log or radiusd Log. I cannot figure out how to add the base station to the list! Do I need to just manually add it to the clients.conf? If I do that, I feel like I probably won't get any of the special features that come with the Server managing the base station. Has anyone else experience this?
    The base station does get the configuration from the server when I set it up, it switches from WPA 2 Personal to WPA 2 Enterprise with a shared secret, the correct IP and port 1812.
    The server does not have a firewall configured or enabled (for simplicity while configuring this...)
    Here's how I set up Radius:
    Selected the Time Capsule from the Hardware list in Server.app
    Checked the box for "Allow user name and password login over wi-fi"
    Opened up the Server Admin.app and selected my server
    Expanded to choose RADIUS
    Chose Configure RADIUS Service
    Allowed all users
    Selected my Base Station and entered the password
    Used my default certificate
    Accepted the default options
    Let the Time Capsule restart
    After the Time Capsule was back online, Base Stations lists 0 base stations.
    Clicked on the Base Stations Tab and Chose Browse, selected the base station, entered the password, let the Time Capsule Restart, it shows up in the list, but when the list is refreshed, the Time Capsule no longer appears in the list.
    Clicked on the add button ("+") and Added the information manually, set a shared secret, and let the Time Capsule restart, it shows up in the list, but when the list is refreshed, the Time Capsule no longer appears in the list.
    Using Terminal, manually tried to add the Base Station: radiusconfig --capture-base-station 10.0.1.1 10.0.1.254
    Entered a shared secret
    Time Capsule restarted, was never listed in the radius config

    Hello, I am having the same exact problem. Have you figured out a solution?
    Please let me know!

  • I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick.  How can I get my system to recognize the base station again?

    I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick.  I can still see the Internet, but the Time Machine cannot backup now because it cannot locate the AirPort base station.  How can I resolve this issue?
    Steps already taken with zero success:
    1. Restarted the AirPort Base Station multiple times.
    2. Restarted the Mac Pro multiple times.
    3. Looked online for AirPort update for 6.3.2 version.
    Other Apple products in my house can still see the AirPort Base Station, however my Mac Pro and Mac Book Pro cannot.
    Please advise.

    That information helps. If you want to use one of the SmartStor's disks as a repository for sharing your iTunes Library, then do not configure that disk as a RAID. Format it with Disk Utility using the Erase tab. Mac OS Extended (Journaled) is the correct choice.
    Connect it to your Time Capsule, then use AirPort Utility to configure access requirements for sharing it on your network. It should appear as a shared volume in the Finder, available to all your Macs as you thought it should.
    I also thought maybe the extra HD space would be added to the existing Airport Disk.  It isn't.
    Correct. There is no way to do that. The only way to increase the capacity of a Time Capsule's hard disk is to replace the Time Capsule (or its disk, if you are amenable to disassembling it) with a larger capacity model.
    If you also want to use the SmartStor as a RAID, that is another story, and you should probably attack that problem separately.

  • Just installed new Time Capsule now my airport express range extender will not work any suggestions

    Just replaced my Time capsule that died with a new one now my airport express range extender won't work.  Any sugesstions?

    Thank you William, I reconfigured the Airport Express and it works perfectly.  Sorry I did not get back to you sooner but I came down with a bad cold.
    Thank You, and Merry Christmas and a Happy New Year.
    raiderron

  • Using Time Capsule With Existing Airport Network

    Hi All,
    I already have an Airport connection and would like to setup TimeCapsule on that network. Do I need to plug in an ethernet cable? Will it conflict with my existing airport base station?
    Thanks in advance,
    Tim

    Hi All,
    I went through the setup on the Airport Utility but honestly I'm very confused as to how to set this up. It's being recognized by the Aiport utility but when I got to configure it, the airport utility says "Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)" I've connected it to my Ethernet port even though I thought I shouldn't have to and it still gives me this message. Thoughts?
    Thanks in advance!!
    Tim

  • I just got a Time Capsule, and when I try to use it to extend my Airport n type network, it seems to take it over instead.

    Could I be doing something wrong to cause this? The Time Capsule is hanging off the network on an ethernet cable and can be accessed by all the Macs over wireless, but I would like to use it to strengthen the signal at that end of the house.  When try to set it up the extend the network, It seems to take it over and knock off the Airport Extreme and Airport Express currently on it.  When I initially set it up, I selected "Extend network" but it changed it on its own to create network.  I later changed it back to extend, but it then took over and I had to turn off its wireless to get the Epress and Extreme back onto the network.  I had just updated the Airport Utility to the latest version on my Macbook Pro and Mini, but I have an iMac still on Snow Leopard that I believe is still running an older version.

    Actually I am not sure how much it is able to export of the old settings but worth a go.
    The file is xml format .. so it could be possible to extract info anyway.
    ?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    You can always load 5.6 utility onto any version of the OS from Lion following.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

  • Time capsule with older Airport

    I just got Time Capsule wireless network up and running, and my newer ibook 2 GHz Intel Core 2 Duo with Leopard connects just fine to the network, which I established using that ibook.
    But, I also have an older ibook G3 with wireless Airport card, and would like it to connect as well for use around the house. If finds the networks but says "The password you entered is not correct for the selected Airport network." I am certain the password is the same and correct.
    Will this older ibook and Airport card connect to Time Capsule or are the frequencies somehow incompatible?
    Thanks.

    ...my newer ibook 2 GHz Intel Core 2 Duo...
    That is a MacBook or MacBook Pro... not an iBook.
    What type of wireless encryption are you using? An iBook G3 can NOT connect to a WPA2 protected network.
    The iBook G3 can connect to a WPA protected network IF the iBook is running 10.3 or beyond.
    The iBook G3 can not connect if your Time Capsule is configured to use 802.11n only.
    BTW, the Multicast rate has absolutely nothing to do with it. This is the minimum rate at which the base station should drop the wireless connection.

  • Time Capsule with existing Airport Extreme--Help

    I just bought a new 20 inch iMac with a Time Capsule for home. I have an existing Airport Extreme and there are a number of peripherals (2 iBooks, Playstation 3) which feed off of this airport. What I want to do is make the Time Capsule accessible only to my new iMac and keep the other network intact. I disconnected my DSL from my Extreme and connected it to the Time Capsule. It works fine. My thought was then to run an ethernet line from the back of the TC to the Extreme. I did this, got a green reception signal on the ethernet from the TC, but am unable to make the Extreme work as it did before. I know I'm doing something wrong--possibly the config on the Extreme--but I'm clueless as to making this work. Any help would be appreciated.
    Thanks

    Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

  • Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

    I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

    ... Which is the best way to configure this?
    The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
    If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
    As you can see it's quite versatile.

  • Can I extend the range of my Time Capsule with an Airport Express?

    I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

    i think you have the same concern as mine....
    would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
    my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
    i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
    by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
    this is all in preparation to buy a new TC...... is my understanding correct?

  • Time capsule with a airport extreme n router

    Question I already have a Airport Extreme N Router and it works very well. But now I would like to have the Time Capsule and some how I don't know, have both hooked up maybe the older extreme N router as a extender? Can any one tell me how I can do this or if it can even be done.

    Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

Maybe you are looking for