Just got an apple tv and not working with 10.4.1

I cannot download itunes10 so i cant use tv, when i try and download 10 it says it cannot work with 10.4.1 is there anyway around this

Hi Paul, and a warm welcome to the forums!
You must purchase and update to 10.5.x...
Macintosh Software
* Mac OS X version 10.5 or later
* QuickTime 7.6 or later
* Support for HE-AAC requires QuickTime 7.6.4 or later
* Safari 4.0.3 or later
* 200MB of available disk space
http://www.apple.com/itunes/download/
http://fixmemac.com/post/1053125744/itunes-10-requirements
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it!
But if that's an Intel iMac 10.6 is cheaper...
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Message was edited by: BDAqua

Similar Messages

TS1591 i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarte

i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted. Does anyone have any other suggestions?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

My Macbook has died. Mail and Firefox wouldn't boot up today and so I turned it off at the button. Now I've just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick. Any suggestions?

My Macbook has died. Mail and Firefox wouldn’t boot up today and so I turned it off at the button. Now I’ve just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick.
Any suggestions?

Try rebooting while holding down the Command and R keys (two keys).
If you see an icon for Recovery, select it and continue.
Then select Disk Utiltiy and press Return.
Now select the hard drive and the Repair Disk.
Quit DU when that is done and restart.

Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

My apple ID is not working with my apple store

My apple ID is not working with my apple store

I have the exact same problem as "Jan Olsen 1"
I sent them feedback:
"I was given a $25 iTunes gift card.
When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES).
I requested help changing the password through an e-mail. Went through the process, changed the password.
I successfully logged on to my account and entered the gift card information and was given a $25 credit.
When I tried to buy mp3s, I was asked to enter my password - AGAIN.
I got one of the following messages each time I tried to enter my NEW password:
'We could not complete your iTunes Store request. An unknown error occurred (5002).
There was an error in the iTunes Store. Please try again later.'
or
'Verification is required.
You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
Don't know where to go from here."
And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
Ridiculous! Frustrating!

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

HT202157 My apple TV is not working with light flashing after up date

My apple TV is not working with the light flashing after an up date, what can be done?

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
I am getting an error message as soon as I try to connect my Apple TV
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
it was working fine however after the upgrde it is giving me the above error message

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

don't know. what have you done to troubleshoot?

HT3302 my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried to reboot but nothing happens.. pls help..

my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried to reboot but nothing happens.. pls help..

The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way.

Apple Tv does not work with youtube and movies on iphone or ipad

I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
I think it started about a month ago. I can only use Netflix.
If I try YouTube and select a video (even if small) it just keep spinning and never starts.
The same thing happens with my video from iphone 5S, 5, and ipad 2.
Than I went to my sons house with a Apple TV 3rd generation and different wifi,
same thing happens, I can not show a video from my iPhone 5S.
What is going on, did Apple TV change something?
Is this a update that went wrong?
(I have auto update and also checked manually to make sure have latest apple TV FW)
(All iphone and ipads are latest FW).

Hi pcorsaro,
You may need to restore your Apple TV and see if the issue is resolved after that process:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

My apple id will not work with ichat., my apple id will not work with ichat.

My ichat will not work with my apple id. How can I make it work without changing my apple ID?

the error message reads:
your account has been disabled
This Apple ID account has been disabled for security reasons. Tap Reset to reset your account
I have reset my account ID but it still does nit work on my IPAD.
Does work on my IMAC and IPHONE

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

Just got an apple tv and not working with 10.4.1

Similar Messages

Maybe you are looking for