Just got an ipod cant get it to work please help

hi i just got an ipod nano it came with the apple ipod + itunes cd, is that the only cd you need? ok so i installed everything on the computer (win xp) plugged the ipod into the usb slot it charged, but all it will say is do not disconnect thats it ive uninstalled everything and reinstalled everything i did the update driver thing, but still all it will say is do not disconnect and it doesnt show up in itunes, and my computer just sees it as a mass storage device, but if i unplug it and turn it on by holding the 2 buttons it works fine but no music so i plug it back in hold the buttons to turn it on it comes on then goes right back to saying do not disconnect, anyone have any ideas?

Welcome to Apple Discussions!
It sounds like you are doing things basically fine.
The "Do Not Disconnect" screen is normal for your iPod to say to you if you connect it to your computer. When you want to disconnect your iPod from the computer, all you'll need to do is a simple "eject" of the iPod:
Look at the bottom-right corner of your screen, and there's the system tray icons there. If the "Safely Remove Hardware" icon is there, click on it, select your iPod, and click "stop".
As for your iPod not being recognized by iTunes, does it show up in "My Computer" or not? If it does, try formatting your iPod:
Format your iPod via "My Computer":
Go to "My Computer".
Right-click your iPod there.
Click on "Format".
Does the iPod format correctly? Check if it works in iTunes after this.
If your iPod doesn't show up in "My Computer", then try formatting your iPod via "Control Panel":
Open Control Panel.
Click the "switch to classic view" link, if necessary.
Double click "administrative tools".
Double click "computer management".
Under "storage" click on "disk management".
Find your iPod's listing.
Right-click on it and click "format".
Select "FAT32" and start the format.
See if your iPod it recognized by iTunes now.
Any more questions? I hope this helps!
~~Kylene

Similar Messages

  • Cant get port forwarding working, please help :(

    I bought an airport extreme yesterday, and since then ive been trying to get port forwarding to work. I've set it up before on other routers, and while its always been a hassle, this is the first time where I might just give up and take the router back. I've been searching the boards for solutions, and ive implemented several of them without success, and a call to apple's tech support got me nowhere. Im sure im just using the wrong number or setting somewhere, but I just cant seem to find it.
    One suggestion i read was to set up the routers connection to my modem manually, instead of through dhcp. When I switched from dhcp to manual, i noticed all the prior numbers except dns servers stayed entered, so i wrote down the ones from when it was set for dhcp and typed them in. My manual setup is:
    I.P.: 68.197.191.59
    subnet: 255.255.224.0
    router: 68.197.160.1
    dns: 167.206.245.68
    167.206.245.69
    every other setting i left on the default.
    the dhcp range is 10.0.1.2 - 200
    One entry recommended a static ip. I originally set one up with the dhcp reservation feature, but then another post said your ip should be outside the dhcp range. Not sure if either method is better, but ive set my system with the following static ip:
    i.p: 10.0.1.201
    subnet: 255.255.254.0 (i was unsure what to enter here, so i chose the same as the routers)
    gateway: 10.0.1.1
    in port forwarding i made an entry with 60000 for the 4 public/private tcp/udp and an ip of 10.0.1.201 (i have tried many other port numbers in the odd chance that the one i picked at random might have already been in use)
    I left every other setting on the defaults. The nat settings (a setting im not familier with) is current set for enabled with the default host box above it empty.
    I should mention, my pc is wired to the router. I am using utorrents port checking site, as well as canyouseeme.org. Neither can ever see my port, one simply says not open, the other says connection refused.
    I hope someone out there can help me with this, as the router is great with this one exception, and I'd rather not return it.

    For starters, it's probably not a bad idea to "factory reset" your device since it sounds like you've had a lot of people giving you different advice. This isn't to say that you've been given *bad advice* but, it may make things easier for a trouble-shooter if you start over from a "known" state.
    That said:
    You need to setup manual port mapping. The problem is, when somebody from the outside tries to access your computer, the Aiport (for lack of a better analogy) isn't expecting any visitors; so it turns them away. ---That matches what you are seeing from canyouseeme.org etc...
    Your error was when you "made an entry with 60000 for the 4 public/private tcp/udp and an ip of 10.0.1.201" Essentially all that will do is make a mapping for one port. Port "60,000" which to my knowledge, isn't used by anything.
    You have to tell the Airport specifically what "outside" ports (each and every one) that you want routed to what "inside" ip address.
    I use:
    Public TCP: 22,80,443,27900,13405
    Public UDP: 123,7777-7783, 13405,6881-6999
    Private IP Address: 10.0.1.201
    Private TCP: 22,80,443,27900,13405
    Private UDP: 123,7777-7783, 13405,6881-6999
    This enables: telnet, http, ssh, bittorrent and unreal tournament from the outside and routes ANY AND ALL TRAFFIC from those ports to my PC at 10.0.1.201 on the inside.
    If I ran AIM, or ICQ or one of those things, then you need to add the ports that that system uses to the list also.

  • Cant get voicemail to work. please help.

    I had a RAZR from at&t and voicemail was fine.
    Got my 3g.
    When people call me it states "user has no activated voicemail."
    When I try clicking on the "voicemail" icon on the phone area it wont let me click it.
    whats going on?

    This is discussed less than 10 threads below -- welcome to the forum, but it is customary to read first before posting the same question again.
    Here is a link to the discussion on this same problem:
    http://discussions.apple.com/thread.jspa?threadID=1598877&tstart=0

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • I just got another ipod 5th generation and its working like a 4th generation. Help please?

    Origionally i cracked the screen on my 5th generation ipod. Apple gave me a new 5th gemneration and when i reatored the backup dat it startred working like a 4th generation. i downloaded iOS 7 and know i wont let me update. it says error code 3014. what do i do? i cant do anything on my ipod all it says is that the symbols that say connect to itunes. I dont know what to do? someone please help!

    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
    Also:
    https://discussions.apple.com/message/20200092#20200092#20200092
    https://discussions.apple.com/thread/4845581?tstart=30
    https://discussions.apple.com/thread/4947296?tstart=0

  • Cant get into my messages - please help

    Hello
    I cant get into my messages. I press on messaging and the screen looks like it will go through but then it just returns to my main screen again. My handset is also not receiving texts my friends send me! yet i can bluetooth pics to my handset off other phones - but then it wont let me into the inbox to open them. I have put my sim in another handset and it works fine.
    What are my options? if I reset will I lose all the saved picture messages in the sub-folder i have set up in the inbox? Is there anyway I can get to these and save them! please help

    My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
    Used nokia pc suite to back everything up off the phone.
    We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
    We then entered *#7370# to reformat the phone, and messages were than accessible.
    As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
    We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
    Hope that helps.

  • Just got firefox yesterday, can load Adobe Flash Player, please help

    Just got Firefox yesterday. This morn I tried to "Listen Live" or "Live Stream" from a radio station. It said I need to download Adobe Flash Player. It won't let me download it. Can you help please,
    Thank You

    This may not be a Firefox problem as such. It may well be that you do not have administrative rights to install FlashPlayer, or for some reason security software is causing a problem. Exactly what do you mean by ''It won't let me download it.'' possibly any error or warning messages you get will be meaningful; what are they ?
    See
    * [[Managing the Flash plugin]]
    Presumably you could use Internet Explorer, does that work with the radio stations ? <br/> note IR & Firefox are likely to need separate installs of flash Player, and certainly you will need to test each browser separately for flash Player functionality.

  • Ipod touch 2g speakers not working Please help me!!!!!!

    ok so i got my ipod for christmas the loud speaker has been working great. I dnt use it that often. Just 2 days ago, it stopped working. Like the clicking sound fro the keyboards, alarms, and even music wouldnt work. Today the clicking sound came back but went again. I tried a reset and restore. still nothing. I noticed that everytime i turn off the volume and i go to music or anything that involves volume, the volume automatically adjusts to full. i dnt know if this is normal. Please help me!!

    I'm sorry for that but I guess you have to say good buy to your old friend...
    I have just received my third iPod touch that already has some new problems just to annoy me(of the conection-prolems sort).
    This is definetly a hardware problem! But you could try to be sure that nothing is left in your headphone jack. And your volume problem is weird but not unusual.
    (Excuse my bad english please)
    Oh and try to set the volume settings to adapt to one level.
    Another reason could be a faulty volume rocker switch.

  • Cannot get itunes to work please help

    When I double clik on ITunes it takes ages to start then when i plug my ipod or shuffle in the window opens showing the drive ie. E:\ for my shuffle and i get the following message in itunes " The software required for communicating with the Ipod s not installed correctly. Please re-install ITunes to re-installthe Ipods software"
    I have uninstalled and re-installed, clean out the registry tried selective startup.
    Been without itunes for over a week now any help would be much appreciated.
    I also installed Itunes on my works laptop and this operates fine and sees the ipods, all be it without my library.

    this is what i get when i run diagnostics in itunes with shuffle connected
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gericom Ego
    iTunes 7.7.0.43
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.0.0.33
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 00C44CCC186A10D9
    Current user is an administrator.
    The current local date and time is 2008-07-30 10:56:04.
    iTunes is not running in safe mode.
    Video Display Information
    ATI MOBILITY RADEON 9700
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.7.0.43 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 2.0.28.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
    Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
    Serial Number: 5E643ZULVTE

  • HT201210 i want to restore my ipod but it doesnt any work ,please help me

    hi my ipod is under passcode lock and i dont know passcode,and i restore it but it dosent work ,having problem to restore it,please help me

    What happens when you try to restore?
    If it is asking for the passcode then
    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod says it is connected to my wifi but I cant get on the internet Please help

    Can somebody tell me how to connect to the internet?  All of a sudden I cannot connect!

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Just got daughter ipod touch, no home screen...HELP

    we turn the ipod touch on and it has the plug in cord going into a blue lit up ball that says itunes....WHAT do i do!!! HELP...my ipod touch did not do this

    Try a Restart and a Reset...
    Restarting your device
    1)   Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2)   Press and hold the Sleep/Wake button until the Apple logo appears.
    Follow these steps to reset your device
    Note: Reset your device only if it is no longer responding and the steps above do not work.
      Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • I just got my printer to day and can not get it to work please help p.s. email nsdolan@comcas

    THIS IS A HP DESKJET 3050A ALL-IN-ONE J611 SERIES

    Hi NEDJDOLAN4,
    What functionality is not working for your Deskjet 3050A:
    -Printing from the computer?
    -Printing from a mobile device?
    -Scanning to a device?
    -Copying by stand-alone?
    -Sending an ePrint job?
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • A page called...txtapplynowbulletsgif came up on my mozilla, i tried everything including uninstall and reinstall i cant get rid of it, please help is this a virus

    using mozilla just getting on face page. a strange page popped up called...txt apply-now bullets-gif. i tried everything to get rid of it including uninstalling mozilla and reinstalling it. same page appeared. is this a virus, how can i get rid of it . thank you

    Please proceed as follows.<br><br>
    #Click the small down arrow in the Search Bar (''that's the small one to the right of the location bar where normally type in web address'') to get the list of search engines and then click "'''Manage Search Engines'''" at the bottom.<br><br>
    #Find '''Questscan '''in the list, click it to highlight it and then click the '''Remove '''button.<br><br>
    #Close Firefox and then restart it again.<br><br>
    #Go to Facebook, or somewhere else where the problem usually occurs and see if it still happens. If it does, proceed with step 5.<br><br>
    #In the location bar where you normally type in a web address, type '''about:config''' and hit Enter.<br><br>
    #If you see a window which says "This might void your warranty!", click the button which says "I'll be careful, I promise" so you can continue with the next step.<br><br>
    #In the filter at the top, type: '''keyword.URL'''<br><br>
    #Double click it and remove whatever's in there and replace it with http://www.google.com/search?q= and then click OK.<br><br>
    #Close the tab
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''To reset your home page, do the following'''.<br><br>
    * Go to the site you want to set as your homepage.<br><br>
    * Click the Firefox button, go to '''Options '''| '''Options '''| '''General'''.<br><br>
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.<br><br>
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.<br>
    After you complete the above steps, download the free version of Malwarebytes from http://www.malwarebytes.org/products/malwarebytes_free and run a full system scan as precaution.

  • Bbm symbol is on screen i cant get rid of it Please Help

    My bbm was working fine until last week but now i have a symbol saying i have 2 new bbm messages i have deleted all conversations and contacts and also all emails, facebook notifications and txt messages and i have tried taking the battery out, nothing works and its driving me crazy! can i uninstall and re install or what do i have to do to get rid of the icon??

    Have you looked to see if you have any new BBM contact requests?
    Any new Group Chat Requests?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • How do i get my contacts to sync so they are the same on my computer, Iphone and Icloud?

    from over the years I had a lot of information in my address book that was not relevent anymore, was incorrect or incomplete or a dupluicate. I went through all of them on my mac computer and updated all of the information. As soon as I pluged my iph

  • Whenever I try to open the iTunes store, it won't load.

    Whenever I try to open the iTunes store, the page will load about halfway and then a blank white screen will appear. I don't receive an error message or anything. The only thing that I can view is my iTunes account settings. I have tried uninstalling

  • How to deploy the Workspace Agent Services as a Window Service!

    Hi all, does anyone know how to install the Workspace Agent Service back as a Windows Service after i re-installed an reconfigured the workspace completly i do not see the Agent anymore in my Windows Services. I sure would like to avoid to have to un

  • Alignment Issues with Creating Crop marks

    I am doing some very basic print layout and creating crop lines at the tops and sides of the page for the printer. Unfortunately my crop marks are not aligning. For example when I specify a line to appear at the top of the page (which btw is 8.5" x 1

  • HP Photsmart 7510 not printing black

    All of a suddent the printer is not printing black.  I have replaced the cartridge, run the report (all colors except black show) cleaned the cartridge, and aligned the cartridge (it failed the alignment).  Any suggestions?