Just got new hard drive and now itunes wont work

I had my hard drive replaced in April and started having problems right away. I finally had a chance to bring it in today and they replaced the hard drive again. I don't have an external hard drive so I couldn't back up my music that way, so I tried using CDs and that didn't work either. At the store, the guy that was helping me suggested I use a flash drive. So, he did that for me. He said when I set up the computer I should open the flash drive first and drag and drop the saved music into the music folder and then open itunes. I did the first part but when I opened itunes I got a message saying "The file 'itunes library' cannot be read because it was created by a newer version of itunes.
Does anyone know what that means? itunes wont open at all and I can't even listen to my old music. Any help would be appreciated.

Did you try using the File>Add to Library option? I would dump everything you put in the music folder, since it's not recognizing it, and then try to re-import it using that option.
Technically, the prompt means that you're using, for example, iTunes 7 to try to open a file that iTunes 9 created, and it won't be able to do it. Do you know what version of iTunes you used to create the original file, and which version you're using now? It's hard to imagine the one you're currently using is older than the one creating the file.

Similar Messages

  • I moved my itunes library to external drive and now itunes wont work.

    I moved my itunes library to an external drive and now itunes cannot find the library. I followed a youtube video and all seemed to work fine until i deleted the old library and emptied the trash. Prior to deleting and emptying the trash I checked preferences to verify the path of Itunes was to the external drive. It seemed to work even when I moved the original library to the trash.
    Now when I launch itunes the song listings show but the songs cant be found. I checked the volume of my itunes that I moved to the external and it was about 4 GB that i moved. I have approx 2000 songs.
    Any suggestions?

    Hold down the alt/option Key when you start iTunes a dialog box will open
    Select Choose Library and select the itunes library on your external drive

  • Just got new hard drive installed from apple and my old password doesn't work and it won't let me change it

    just got new hard drive installed from apple and my old password doesn't work and it won't let me change it.cant install anything ,pls help,thx

    Camera works. Now gotta find out about this mic thing

  • HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
    Then, install OS X.

  • Updated music files on my hard drive and now itunes can't find path.

    I updated my music files on my hard drive and now iTunes can't find the path. too many to manually do. can itunes refresh or should i delete all itunes music files and re-import?

    Once a track is in your iTunes library, you should not touch it except through iTunes. But I guess you know that now.
    iTunes, to answer your question, cannot "refresh." If you re-add those files to your library, iTunes is unable to match them with the existing library entries, and will create a bunch of duplicate entries. This is a longstanding shortcoming of iTunes (and the source of lots of traffic on this fourm).
    If there are "too many to manually" reassociate, then starting over, in the sense of deleting and then re-adding, may be a good plan.

  • I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly.  It was connected to one windows 7 pc about a week ago and worked but now I tested it on 2others

    It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
    I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly.  It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected.  I tried the whole Apple Guide and it was no help.

    install the latest version of itunes

  • I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
    For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • I had to get a new hard drive and now iPhoto is gone.  Can I get it back?

    I had to replace my hard drive and now my iPhoto is gone.  Is there a way to get it back?
    Thanks

    reinstall from the original source
    Could be
    1 - the restore disks that came with the computer - if it came with CDs and you do not know where they are then contact Apple to see if they can be replaced
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    LN

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • I had a computer crash and Hard drive data lost, so I reinstalled Itunes on my new hard drive and now cannot locate ALL of the purchases I had done in the past.

    I thought that ALL itunes purchases were held on the Apple server for itunes.
    When I reinstalled my itunes on my new hard drive, there were NO histoical purchases on my itune account.
    Any thoughts to a solution.
    Thanks

    Make sure you have at least iTunes 10.3.1, then go to the iTunes Store, log into your account, and click the new Purchases link under the Quick Links. The new iTunes in the Cloud service may allow you to re-download your purchased content (music, videos and TV shows not available for re-downloading in all countries at this time; movies and audiobooks not available for re-downloading at all yet). You can also do this from an iOS device.
    For more information, see:
    http://support.apple.com/kb/ht2519
    Regards.

  • Time Machine restore on new Hard Drive and now my login password not working

    I just had a new hard drive installed and they put in a clean version of 10.6.
    I got home and used my TIme Machine to restore from my other computer. It finished, but now I am locked out, bacause its not accepting my password. I know its my password, the hint is the same as I have always had. It just won't work,
    Since the repair place installed the software, I don't have any other disks to boot from. Does anyone know a way to fix this or reset the computer again? I don't care if the files are lost, I can copy them over later. I just need to get past the login screen. Thanks!!

    Do you have any OS disks you can boot from? If so, boot from the disk, look in Utilities, and see if there is a reset password option.

  • New hard drive and now can't get library back!

    Hi,
    My hard drive recently crashed and I did not have a backup (I know, I know!). Anyway, new hard drive installed and some of my files were saved including some music files. However, when I try to add them to iTunes, they do not add. I have everything on my ipod but when I connect it, it says that I have already synched it with another computer. How can I get my music back in the library as it was before? And do I do this with the music and podcasts stored on my computer or can iget my music from my ipod to the library?

    *can i get my music from my ipod to the library?*
    Connect your iPod to your computer. when you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

  • I had to get a new hard drive and now illustrator says i need to reactivate by license - when I go to do it over the phone i get a recording saying my reactivation number is invalid

    I had to get a new hard drive, now illustrator says my license is expired and I have to get reactivated.  When I used the phone support and entered in all the numbers, a recording comes up saying that my reactivation numbers are invalid.  What can I do so I can start working again in illustrator

    Where did you purchase illustrator. It sounds like it was from a shady dealer. I would contact Adobe and see what you can do.

  • I installed a new hard drive and now can't open Adobe Photoshop Elements - what do I need to do?

    My hard drive on my iMac crashed 2 wks ago, and I now have a new SSD harddrive. I had an image of everything from my old hard drive, but Elements won't open. What to do?

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • I installed a new hard drive and now my sound is real tinny

    I am using the snow lepoard OS.  Everything else is working great just the sound quality stinks and is not what it was previous to my hard drive crashing...I am a real novice and just happy and could install the hard drive!!! please help be patient and real detailed in any steps that i may be able to do. Thanks

    No reason to. I always a cloned copy of my operating systems so I can reclone it back in case the the one I use dies.

Maybe you are looking for

  • Deploying Java Applet in IE 5.0

    Please help!! I want the secret to loading up my applet in IE 5.0 with permission to read and write to the clients local drive. If you know anything (the SECRET, articles that may help me discover THE SECRET, ANYTHING!)- please share!

  • Populating List Item

    HI ! I want to populate List item , from table using SQL query, e.g. select * from dept_name,dept_no from dept; and want to save deptid. i.e list item disply only dept_name and store/save dept_id as it is foreign key. Thanks & Regards !

  • Exporting from SE11, Number Format Problem

    When looking at data in SE11 from a table, the number format is XXX.XX,YY ..basically a number 900.65 is represented as 900,65 in the R/3 system. I want to export the data in a more meaningful format into Excel ie. 900.65 as 900.65 instead of 900,65.

  • SSD and Traditional Disk on Early 2011

    Hi, I am planning to replace by Disc Drive with SSD Drive. So at the end would have 1 SSD and 1traditional drive. My question: - How to replace Disc Drive with SSD? - What kind of SSD do I need to buy. I read there is SSD with bracket. Do I need SSD

  • Way to check stats on bit rate versions streamed?

    Does anyone know if Flash Media Server has a function that allows you to see statistics on which particular streams are being delivered?  Seems like that would be a handy tool in determining which bitrates are important to continue providing, and whi