Just got new ipod after old one got stolen. NEW ONE WONT WORK!!!!

So my old ipod got stolen. Yesterday I bought a new nano. I get home, and it turns out my computer cant even find the new ipod. I am using the new one with the same itunes account as the old one. What do I have to do to get the new nano hooked up??

What model was the old iPod?
Have you installed the latest version of iTunes as the Nano needs the latest version.
Are you using a USB 2 port?

Similar Messages

  • Impossible to update to new itunes -- after old one stops working and refuses to update

    I'm trying to load a new version of itunes onto my wife's computer after the old one hasn't been able to update or even visit the music store. I tried following the recommendations from the site to delete (through control panel/add and delete programs) and was unable to successfully delete the older programs. The same goes for quicktime.
    It was recommended that I delete the following programs on the apple site...
    itunes
    quicktime
    apple software updater
    apple mobile device support
    bonjour
    apple applications support.
    being unable to delete these programs successfully, the installer halts and says I need to delete completely the old programs.
    Any manual delete tips from you guys? The operating system is XP

    What's the precise text of the error messages that you get when you try to uninstall applications please, dv?

  • Boot failure after installing new cpu, old one wont work either!

    Hi
    Got a KT4V-l which was running an Athlon XP 2100+ happily
    bought a Sempron 3000+ which i installed, but on power up the board just gave a 2 tone alarm and powered off the system.  so put the Athlon XP back in, booted ok, looked on the MSI site and found the correct bios update.
    Installed the bios update, rebooted ok, went into the bios, all seemed fine.  Powered off the machine, out the sempron in, but system gave the 2 tone alarm and powered off.  took out the sempron and put the Athlon XP back in, but the same happened.
    now i can't get either cpu to work, and the machine powers off after 2 seconds of being on, with this 2 tone alarm just bleeping until you remove the power.
    any ideas on whats happened!?
    thanks
    Chris

    thanks for that suggestion , but it's something to do with the cpu(s), if theres no cpu at all the machine powers on ok, obviously you dont get anything, but it powers on without any beeps or tones
    but with either cpu in, it powers on, and about 1-2 seconds it powers off, but theres this 2 tone alarm going on which continues until you unplug it, everything else fans etc.. are off at this point , but just this low, then high tone, not a beep as such which just repeats, low/high pause, low/high etc..
    thanks

  • My ipod is not recognized on a new computer after old one crashed.  I have painstakenly restored all songs and playlists.  I deautorized all, and the reauthorized new computer.  It won't sync.

    My ipod is now recognized on a new computer after old one crashed.  I installed itunes on the new computer, and have painstakenly restored all songs and playlists. I also purchased several new songs from the itunes stores.  Now my ipod will not sync with the new computer.  I deauthorized all computers, then reauthorozed the new one.  My ipod still won't sync.

    ...after running diagnostics through itunes, itunes says  "device not found"  Seems there are a lot of others having this problem,and it seems to be related to new version of itunes.  Apple should do something to fix this.

  • HT4113 I bought a second hand ipod 4 touch my other one just got stolen how do i get this passcode off and set it to factory?

    Hi I bought a second hand ipod touch 4th generation it has a passcode on it I have tried to hold the on/off button and the home button for 20 sec but never goes to the plug and cord thing symbal I want to factory reset it my other I pod just got stolen a whole lot nicer one but dang this one was affordable please help thanks

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

    just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad.  any help would be greatly appreciated.

    Double click the home button (square)  and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
    Good luck hope it works.

  • Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro?  The internal disc drive broke after apple care expired, natch.

    Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro?  The internal disc drive broke after apple care expired, natch.

    No, sorry. it won't work with the 2007 MBP. You can replace the optical drive yourself - just go shopping at OWC.
    Good luck,
    Clinton

  • Reinstall Photoshop Elements 13 and Premiere Elements 13 on new PC after old one crashed ?

    How can I reinstall Photoshop E 13 and Premiere E.13 on new PC after old PC crashed? Obviously I was not able to disinstall prior to crash.
    Thanks for your help. EME

    Many thanks !
    De : Peru Bob
    Envoyé : vendredi 20 mars 2015 23:38
    À : Elizabeth Mac Eachran
    Reinstall Photoshop Elements 13 and Premiere Elements 13 on new PC after old one crashed ?
    created by Peru Bob in Photoshop Elements - View the full discussion 
    Scroll down and use the chat option from this link to get the old installation deactivated:
    Activation & Deactivation Help
    Then download and reinstall from here:
    Download Photoshop Elements products | 13, 12, 11, 10
    Download Premiere Elements products | 13, 12, 11, 10
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7322374#7322374 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7322374#7322374
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Whats the best way to transfer all my music and i tunes library from an old xp pc to new one when the old one wont take the latest version of itunes

    whats the best way to transfer all my music and i tunes library from an old xp pc to a new one when the old one wont take the latest version of iTunes.

    iTunes- How to move the library to an EHD

  • Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?

    Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
    I updated itunes and everything but nothings working and i just can't figure it out?
    Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!

    Loop
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Had security questions changed a few days ago...now the new ones wont work...

    changed security questions a few days ago now the new ones wont work...anyone have this problem?

    hi, try all what these guys say, as they make sense (my bet is on a slug of kebab guys ). 
    you list bits you have tried but don't say if you have tried a new lead?
    i'm not being tricky, as an electronics engineer of some 40+ years who repairs consuls, iPhones, iPads etc. i have some experience of what gets overlooked. Some of the cheap after market leads aren't the best quality,and some darn right lethal, likely to catch fire while your asleep. you might have bought of them.
    i find it tends only genuine Apple leads lock in, but there might be fakes of them to. either way worth a go. perhaps se if your family or mates have one.
    Alan

  • How do I delete my old iMessage email and change to my current one, that Im using when I buy apps and so on. The old one wont go away when I turn iMessage on and of again. pls help

    How do I delete my old iMessage email and change to my current one, that Im using when I buy apps and so on. The old one wont go away when I turn iMessage on and of again. pls help
    Anyone had the same?

    How do I delete my old iMessage email and change to my current one, that Im using when I buy apps and so on. The old one wont go away when I turn iMessage on and of again. pls help
    Anyone had the same?

  • Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    AIR give you classes to detect an on-line or off-line status, it's in 
    this way for the sake of flexibility for instance what happens if you 
    only what to sync  data only on Saturdays at 2 am? If it were done 
    automatically that'll be a problem. And it isn't so complicated.
    You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
      it's an application that does everything you have in mind.
    I don't understand your question abou file types.
    An AIR app can communicate with almost every backend served tech 
    CF, .Net, PHP, RoR.
    Sincerely,
    Michael
    El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
    >
    I have to say that I'm loving the picture! well cool!
    >
    Sorry but I don't quiet understand. I thought AIR did the updating 
    automatically? I didn't realise the developer had to program the 
    logic of how the updates take place?  Is it a case in most AIR apps 
    that when online the app updates the server and once every intervel 
    (of however long) the local SQLite DB is synced to the more updated 
    server DB. Then when offline the developer has to sense that the app 
    is offline and store a log manually of the updates without any help 
    from AIR itself, and then update once it comes online again?
    >
    Can AIR link to anything more than a database on the server side 
    apart from webservices, for example .as files or any other file types?
    >
    What type of server is a Flex app stored on, is it a specific Adobe 
    server rather than a Java or .NET server?
    >
    Thank you so much for your last comment!
    IrishAIRMax
    >

  • I have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    i have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    You will have to ask Vodafone to do it for you.
    Here is a link to their online form http://campaigns.vodafone.co.uk/UnlockCodeRequestForm/

  • Got new iPod - Giving old one to dad

    Ok, I just recently bought an iPod Nano 3rd generation, and I want to give my dad my old one (1st generation). So far, I've connected the new one to iTunes and put all my old songs and stuff onto it. What I want to do is let my dad erase what's on my old one and use his own iTunes. We have Microsoft Windows XP. This is the one with the Welcome and Log-in screen (with different accounts to view different desktops), so I'm pretty sure that the iTunes on his desktop/account is separated from mine.
    What my main question is... How do I fully transfer the ownership of the old one to him? I want it to have his name, his information, and his songs. I don't want our iTunes libraries to be connected in any way, shape, or form.
    I'll await your replies! Thanks!

    Yes his iTunes library will be different than yours if he has his own account. All he has to do is plug the iPod into the computer while logged into his account and iTunes will inform him that the iPod if synced to a different library (yours) and does he instead want to put his library on it. He says yes, and that's all he needs to do. His library will be put onto the iPod and your stuff removed.
    He can change the name of the iPod in iTunes if he wishes.
    Patrick

Maybe you are looking for

  • CX_SY_MESSAGE_IN_PLUGIN_MODE Exception

    Hello.  I am getting an BSP error and can anybody tell me what I am doing wrong?  Below is detailed error I am getting on the web application: "SAP Note:  The following error text was processed in the system: Message E DBMAN 882 cannot be processed i

  • 2008 1099INT output

    Has anyone successfully created 1099 INT output for 2008? I am trying to create the form for a vendor who received interest income from us. The configuration is done and we have applied the 2008 note (1279366) for the new form. The base amoutn appear

  • Creating 2 custome dependent value sets for party_number and customer_numbe

    Hi, I want to create 2 custom value sets XX_PARTY_NUMBER and XX_CUSTOMER_NUMBER When i select the value for Party_number from XX_PARTY_NUMBER, the corresponding customer_number should populate from XX_CUSTOMER_NUMBER This is what i tried 1ST VALUE SE

  • HELP! iMovie Not Detecting My Webcam

    My Webcam Is A Panasonic NVGS-60 Camcorder Connected Via USB To My MacBook White And I Can Not See Why It Isn't Working. It Works With Photo Booth But Not iMovie '08. Please Help ASAP As I Need It For My Vodcast. John Coles

  • No design view for titlewindow in gumbo beta 1

    I created a titlewindow component in gumbo beta 1 and nothing shows up in design view. Anybody no the reason? I think its a bug. Refreshing doesn't work.