Just got the Iphone 6 and it paired BT with the car phone system okay. But it will not pair with the audio part where I could play my recorded music with my 5-C. The system will not connect with the phone and the message is that the settings
My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player". Message says for me to adjust the player. On the phone it is searching for other devices but not connecting. Now same phone is paired with the car multimedia system and will take and make calls. Help!
I very much doubt it if you consider how much data Apple release to App developers
to allow them to create apps that work under iOS
Audi being lazy like most of the other motor manufacturers
They will be registered developers and as such get all the info and data they need
Similar Messages
-
My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.
At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.
-
I just got an iphone and am trying to connect it to my itunes account. Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started. How do I start it? Have already been back to the store with it and no change.
http://tinyurl.com/3hs3g2u
-
I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?
Contact iTunes support. There's a link to it on the bottom of every page in the iTunes store.
-
Hi, Help need I just got an iphone five and it will not connect with my 2008 Range Rover Vogue, my Iphone 3 no problem.
I'm having this same issue with 2009 Range Rover Sport. Since upgrading to the ios7 my phone connects via bluetooth but the address book does not display...Any Suggestions?????
-
I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings>general and settings>general>restrictions. Can anyone help me out?
That model is an iPhone 4, not a 4S.
http://support.apple.com/kb/HT3939 -
I just got an iphone 4s and I need to sync it to my itunes on my pc, but I do not want all the music and apps to be synced to my phone, can I change the settings in itunes with out hooking up my phone?
Open itunes, connect iphone,select what you want, sync
-
I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?
Connect your iPad to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?
You must be signed into the mobile iTunes Store using the same Apple ID you used to originally purchase iTunes Match. On the iOS device go to Settings > iTunes and App Stores and tap the Apple ID. Log out, then log in with the correct ID.
-
i just got my iphone 5c today and i tryed to connect it to my windows 8 computer and connect it to itunes but its not showing up on either on. what should i do? i already uninstalled and re-insstalled itunes and its till a problem
Hello, bluebelle95.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I just got an Iphone and I am trying to get my Itunes music as my ringtone. I already got an app and made a ringtone. I even got the tones tab to appear in my Itunes library. I cannot however get a tones tab to appear on my Iphone sync area. Also I cannot get any of my ringtones into the tones folder. They are no longer than 30 seconds so that is not the problem. Any ideas?
Does this app not provide a video on how to sync it with itunes and then sync it to your phone.
If you have transfer the ringtone to your computer, play the ringtone - then it should move to your tones folder in itunes. Just make sure when you play the ringtone it's plays in itunes. -
My husband just got an iphone. I've had mine for a while. We use the same email address so I thought we could use the same apple id and password. But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes." Not good. How do I unlink them?
Read this planning tips:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.
OK, I think I fixed it.
After trying to restore with an old backup from the phone (it estimated it would take 4 hours) I cancelled and went through the setup menus again, but set it up as a new phone. It then appeared in iTunes and I restored it from the computer, not the phone. It appears to be working, it's syncing my old apps right now.
Summary:
1. Reset settings on phone (hopefully you backed up fairly recently)
2. Set up as NEW iPhone in setup menu on phone
3. Restore from iTunes on computer when it recognizes the phone
4. Cross fingers -
just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the password so I couldnt delete it. I need help deleting it without a password.
If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
http://iforgot.apple.com
If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
If that's not the "password" you meant, please post back and clarify.
Regards.
Maybe you are looking for
-
Multiple iPhoto Libraries and iPhone syncing
Hi- Thanks for reading. I recently used iPhoto Library Manager from Fatcat (highly recommended) to take a 23,000 photo library and chop it down into several iphoto libraries. It seems that my phone by default wants to sync photos with the original li
-
Paging File Size requirement for Windows CE7.1 on Windows 2008R2
Hello , We are installing the SAP CE7.1 Java on Windows 2008 R2. The SAP installtion guide recommends paging space for SCS as 1 Times RAM + 1 GB. However some of SAP note says Paging space is now required for Java only systems. what could be the bes
-
DVD Stutter with Satellite L series
DVDs have been playing just fine for the past year, but last night they started to stutter, audio and video. I've compacted the HD and freed up as much memory as possible by turning off AV etc, but this wasn't necessary before. Any suggestions as to
-
Hello. I'm a newbie in this forum, and I could'nt find a proper forum to post any requests for additional features that could be implemented to the iPod. After giving some thoughts about it: How about the iCam? A 160GB iPod with 2MP video cam with fl
-
Recover datafile in no archivelog mode
Hi, i have always done media recovery using RMAN and this works nicely. However im doing some testing on a database that does not use RMAN and is not in archivelog mode and im confused.(11.2 - aix) My testing is as follows; With the database shutdow