Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my images

Try restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

Similar Messages

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library

Error: The installed graphics card does not meet the minimum system requirements by Aperture

I have a Mac Pro 3.1 10.5.8 and Aperture 2.1.4. My NVida 8800gt with 512 mb was over heating so I brought and install the ATI radeon hd 5770 to replace it. Now when I try to start Aperture I get this message "Error: The installed graphics card does not meet the minimum system requirements by Aperture". All other software works fine, ie photoshop elements and Safari. When I install my old card aperture will open with no problem, but of course the card will overheat within 10 mins and I will have no video. I have search on google with no luck. Will upgrading to Aperture 3 fix this problem?

5770 requires 10.6.5.
The 8800GT - there is the 350* bake in over 10 minutes - 50% or better chance
you can find 8800GT on http://myworld.ebay.com/macvidcards/
http://www.macupdate.com/info.php/id/23049/smcfancontrol
http://www.bresink.com/osx/HardwareMonitor.html
Fan control helps with FBDIMMs which need to be kept under 70C too.

HT4007 The installed graphics card does not meet the minimum requirements for Aperture.

The installed graphics card does not meet the minimum requirements for Aperture. I have not used Aperture in a while and just got this error message. I tried applying OS updates and reinstalling Aperture and still get the same message. Does anybody have a solution or work around.

Are you using a non-standard Graphics Cards? Then this may be the reason.
You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
Reboot and make sure that you this time will boot into regular boot mode.
See: Mac OS X: What is Safe Boot, Safe Mode?
If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
Merry Christmas!
Léonie

Error: the installed graphics card does not meet the requirements for Apre

I had Aperture working fine, and then I did an update on Jan 9, that added support for the Nikon 810 and some RAW format. Nothing else changed, but Aperture now will not open, and give me the error message that my graphics card doesn't meet requirements. Also, now when I open Photoshop, when trying to use the liquify tool, it says that my graphics accelerator has been turned off (not by me). I tried to turn it back on, but it is grayed out in preferences and don't see any other place to enable it. Also, now, my machine will only start in safe mode, and won't let me access the restore version prior to update. Help me please.
Also of note, scrolling of anything is very jittery, but this may be because accelerator is turned off.

You have probably accidentally booted into Safe Mode. Then the advanced features of the Graphics card will be enabled. See this help document:
Mac OS X: Starting up in Safe Mode
Restart your mac and make sure it boots in normal mode.
Sometimes a Mac may boot accidentally in Safe mode, if you are using Bluetooth devices -mouse or keyboard, and turn them on during the startup. Always make sure, your bluetooth devices are already turned on, before you start your Mac.

Error: The installed graphics card does not meet the minimum requirements for Aperture.

I have been using Aperture for nearly 5 years on my MAC Book Pro. I suddenly am getting this message and Aperture will not launch. Any ideas?
This is my graphics
NVIDIA GeForce 9400M:
Chipset Model:    NVIDIA GeForce 9400M
Type:    GPU
Bus:    PCI
VRAM (Total):    256 MB
Vendor:    NVIDIA (0x10de)
Device ID:    0x0863
Revision ID:    0x00b1
ROM Revision:    3427
Displays:
Color LCD:
Resolution:    1280 x 800
Pixel Depth:    32-Bit Color (ARGB8888)
Main Display:    Yes
Mirror:    Off
Online:    Yes
Built-In:    Yes
Display Connector:
Status:    No Display Connected

There are actually two graphic cards in the system, the one you show in your post and one part of the motherboard.
This is done on laptops to help save battery, when the system does need need high performance graphics, when it is doing text it uses the integrated graphics card, when it needs to do high performance graphics like when running Aperture it switches to the other card.
It is possible something is wrong with your system preventing it from switching. What OS version are you running, is it really 10.6.4?
See MacBook Pro: How to determine which graphics processor is in use to determine which GPU is in use. But if it is not switching you most likely have a hardware problem.

The installed graphics card does not meet the minimum requirements

Not true...
I have been successfully running Aperture on a G5 dual 1.5 with an ATI x800xt video card. After a card failure (and a few restarts on the stock video card) Aperture refuses to identify the newly replaced ATI card.
I have tried with and without the ATI software but no luck
any thoughts?

Is OS X recognizing your video card correctly? What does System Profiler think your video card is?

Installed graphics card does not meet the minimum requirements for AP...

2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
23" ACD connected to the HD 2600 card.
Ideas? I perused the threads and found similar reports but no solutions.
TIA
-Allen Wicks

Answering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
Comments appreciated, TIA.
-Allen Wicks

After updating to lion installed graphics card does not meet minimum requirements for aperture

Hello,
I updated to OSX lion yesterday. and Apterture is given me this error message. "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database. But nothing happens when I try opeing the app using those combo key's So I removed the app using mackeeper and tried reinstalling it. still same issue.
I have following machine
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B0E
SMC Version (system):          1.69f1
Serial Number (system):          C02F94ETDMGG
Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
Sudden Motion Sensor:
State:          Enabled
Chipset Model:          AMD Radeon HD 6750M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x8
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x6741
Revision ID:          0x0000
ROM Revision:          113-C0170L-521
gMux Version:          1.9.23
EFI Driver Version:          01.00.521
Displays:
Color LCD:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
VX2245wm:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          QD0064002266
Mirror:          Off
Online:          Yes
Rotation:          Supported
Adapter Type:          Apple Mini DisplayPort To VGA Adapter
Adapter Firmware Version:          1.03
Display Connector:
Status:          No Display Connected

HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

I want to install imovie 10.0 but keep getting message : your computers video card does not meet the minimum system requirements

i want to install imovie 10.0 but keep getting message : your computers video card does not meet the minimum system requirements ? what should I do ?

There are some suggested solutions in this thread:
https://discussions.apple.com/message/23486450#23486450

Software problem? Installed graphics card does not meet minimum requirements

Ok - I seem to have just met the same problem that others have experienced. MB Pro, less than 3 years old, graphics card NVIDIA GeForce 9400M 256MB. I have been using Aperture up until about 1/2 hour ago with no problem. Just now trying to sync my iPad, and Aperture (which launches automatically) responds with "installed graphics card does not meet minimum requirements". All software is fully up to date, running latest versions of all Apple software. What is going on please? I have restarted several times, tried Command/Option/P/R on restarting, but nothing seems to make it work.

You might try to reboot again, this time with the Shift-key hold down to boot into safe mode. This will clear some caches and reset the graphics card. Aperture will not run in safe mode. You will have to reboot a second time.
Do you use an external Monitor? Then disconnect it, before rebooting.
Regards
Léonie
P.S: Do you use a blue tooth keyboard? If you turn it on while booting, you may accidentally boot into Safe mode without noticing it, and then Aperture will give exactly the above error message.

Imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer's video card does not meet the minimum system requirements.

imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer’s video card does not meet the minimum system requirements. What to do? Thanks for any help in advance.

I am not 100% sure this is the issue, but I saw a different thread about the ATI Radeon HD 2600 not being OpenCL compatible for another program and that a newer compatible graphics card would be required to solve the problem. I am getting the same message with my 2007 iMac 24".

I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

Geoff2T wrote:
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
It is just as the message says. Your video card is not compatible.
You can add a compatible graphics card and use FCP X with your mac. I can't suggest which one, but maybe other people on this forum can guide.
And you may also get good suggestions in the Mac Pro forum.

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

Similar Messages

Maybe you are looking for