Just how bad is this phone ? (E70 revisited)

I have actually forgotten how frustrating Nokia phones can be as I had confirmed by (then) new E70 to the bottom drawer because with the firrmware on it, it wouldn't work in my bluetooth enabled BMer.
What joy when I learned of the new version. Could it be that version 3.0633.09.04 (where do these numbers come from) would solve my problem ?
Well I don't know. In fact I don't even know why I tried to put it on the phone. First I downloaded the latest PC Suite (the phone I have which actually works is NOT a Nokia, so I didn't have that on the PC ). Then I downloaded the software updater. Then I connected by recharged (and still plugged into the adaptor) E70, and fired up the updater.
Next the USB message that my phone was disconnected from PC-Suite appeared, and as predicted the updater actually told me there was an update. I now had the option to leave or continue. When I continued, I got a message which told me the updater could not verify my phone !
No WAIT !! I got past this by restarting, and while the message to get out was still on the screen, I used the utility in PCSuite to reselect my phone, and when the updater continued it started the download of 48.1M. Great.
Next it came to the update bit. Again the process failed and again the solution was to do the little tinker with PC Suite to get past that point. In fact I got all the way to where the phone reboots, and shows the Nokia test screen. Here the phone seems to reconnect itself, but either its not fast enough or it's not connecting to the updater, because it reports that the update has failed. Sad but true.
Should I have known ? Should I have guessed ? I have a buddy who has had an E61, an E70 and now wants to try the E90. Is he crazy or what ? S60 does for telephony what Locusts do for corn. If only words would describe how bad this series of phones really is...
For those of you still here, who are in the queues for the E90, I admire your sense of endevour ! May the force be with you.

02-Oct-200705:53 PM
joevpt wrote:
You'd think... Eh!
What I found was that at various stages during the upgrade the NSU disconnects from the phone (which allows PC-Suite reconnect). When the NSU needs to reconnect, PC-Suite was holding onto the connection (because, I think, NSU only disconnects it once at the beginning... )
Regards,
Joe
Patheticlly true.

Similar Messages

I purchase iphone from saudi arabia (mobily telecom), can i use this mobile in pakistan and other custires. and how i know this phone is carrier unlocked..

i purchase iphone from saudi arabia (mobily telecom), can i use this mobile in pakistan and other custires. and how i know this phone is carrier unlocked..

It will be locked to mobily telecom, and according to Apple's list of supported carriers and their features (http://support.apple.com/kb/HT1937) they do not offer unlocking. Since only the carrier it is locked to can unlock it, you have bought a useless phone.

HT201328 There's an icon symbol of a lock with an arrow circleing it how can I find out what this is and just how to resolve this issue?

I turned the iPhone on to find out that there's a lock with a circle with an arrow arroubd it! Can any one out there give me any advise on just how to resolve this issue?

Please check your duplicate post for answers already provided.
https://discussions.apple.com/message/24278034#24278034

HT1222 How to update this phone ?

How to update this phone ?

If your on IOS 5 you can update thru your phone via wifi and plugged into a wall charger.
If your not on IOS 5 then plug your phone to your computer open iTunes and then update that way, itunes should automatically see that an update is needed. Suggest you backup your phone first then update.

Just how bad is the HD screen on the T530

Hey everyone. I'm buying a laptop for my father whose main criteria are:
Overall build quality
(backlit) Keyboard and trackpad quality
At least 15" screen
Upgradeability
International warranty and customer service
Whilst it is overkill for what he wants to do, AFAICS the T530 is the only thinkpad that fits the bill.
The only problem is his eyesight isn't what it used to be and he needs eye-glasses to read the screen on his current laptop which has a 15" 1366x768 display. Hence, a higher resolution screen is out of the question (I understand there is dpi scaling but it is never implemented perfectly across all apps).
I see people warning against the HD display all the time, so I'd like to know just how bad is the contrast, colour reproduction etc?

I understand where you're coming from however I don't mean travel like how a businessman travels. My father just spends a lot of time abroad and an external monitor will not be practical. I'm surprised no-one seems to have any experience with the HD screen. Thank you for your suggestions though.

How to configure this phone Grandstream GXP1405

how to configure this phone Grandstream GXP1405 to use with skype i dont know how to set it up the people i bought it from said i have to contact skype for help as they use a different provider,

Hi,
Do you have a Skype SIP account or you are trying to use your regular Skype account on GXP1405?
A Skype SIP account is needed in your case
Best regards,
GSsupport

I have an Iphone 4s that I installed the face button app. After trying to use the first time, my phone locked and stopped working. Does anyone knows how to fix that problem or how to reset this phone?

I have an Iphone 4S that i installed the face button app. After trying to use it, my phone locked and I cannot get it to work anymore. does anyone knows how to reset this phone and get it working again?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

How bad will this hurt?

I have been considering buying a RV for a while. My boys aren't getting any younger. We currently have our house on the market. It seems like it is going to take forever to sell. My question is how bad do you think it will hurt my credit if I were to take out a small loan for approx $10,000 for a RV? My credit scores on fico 8 are around 660-670. I know waiting until after we buy a house is probably the best idea, but it just doesn't seem like it's going to sell anytime soon and I am dying to go camping and enjoy the summer with my husband and two boys.

Kyliemarie85888 wrote:
I have been considering buying a RV for a while. My boys aren't getting any younger. We currently have our house on the market. It seems like it is going to take forever to sell. My question is how bad do you think it will hurt my credit if I were to take out a small loan for approx $10,000 for a RV? My credit scores on fico 8 are around 660-670. I know waiting until after we buy a house is probably the best idea, but it just doesn't seem like it's going to sell anytime soon and I am dying to go camping and enjoy the summer with my husband and two boys.How about teaching your boys the joy of camping in a tent while hiking in the mountains or in a campground? Most boys would rather do this than hang out in a motorhome. (Motorhomes: Think retirees). I have been reading a lot about personal finance and the rule seems to be borrow only for necessities, pay cash for luxuries. Just something to think about. I know RV's can easily cost 60K - 100K or more, so I might be concerned about a 10K RV needing expensive repairs. Your boys won't be boys forever, but the important part is that you spend time with them. They don't need an RV to enjoy their parents. You could also rent a lot of nights in a nice cabin for less than 10K if you don't like sharing your bedroom space with bugs and bears.

So how bad is this?

So today, for the first time in as long as I've owned my 2.0 GHz iMac G5, it just randomly shut down on me. I thought it was a one time thing, a power surge or something maybe, so I started it back up and went about my business. Then a few hours later, it happened again. And about 20 mins after that, again. By this point I knew something was up, so I backed up a couple vital files real quick, shut it down, and cracked it open.
This is what I saw:
http://img.photobucket.com/albums/v12/newtikki/DSC00185.jpg
So, I figured it was overheating because of the symptoms, but that looks really bad. When I closed it back up, I felt the slit in the back and couldnt feel any air coming out the half that the CPU feeds to, however, the other half (which i presume is pumped from the video card) was pumping warm air. So, how can I resolve this? I bought it in probably June of last year, so I don't have any warranty remaining. How much is this going to cost me?
Thanks,
Michael
iMac G5 Mac OS X (10.4.6)

Hi Michael,
My bet is actually that your primary problem is that the power supply is failing, and that your fans just might be running poorly because of dirt buildup or lower power.
Your Mac will cut out before heat doess any damage to the processor.
There are three fans - one for the Hd, one for the processor , and one for the "system" generally. The HD fan is really the one that does the most work usually. Its "base" setting is at 2300 RPM, while the CPU one sits down around only 1500 when its not doing a lot of work. Its only under load that it kciks up higher, and even then it will rarely be running as fast as the HD fan.
So you can almost always expect to feel a bit more breeze from the HD side than the processor side of the slot.
The general system fan usually sits on about 1700 rpm until things really start to heat up.
Cheers
Rod

Just how bad is these blocked lock chains for performance?

I had the pleasure of participating in load test of an application running on WLS923/J27.6 I stumbled across these blocked lock chains in my JRA thread dumps. And started wondering, is this the bad or very bad? This is from test with somewaht excessive logging.
Blocked lock chains
===================
Chain 2:
"[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" id=39 idx=0x98 tid=5040 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 3:
"[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" id=42 idx=0xa4 tid=3600 waiting for java/lang/Class@0x2BC1BCE8 held by:
"[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" id=96 idx=0x17c tid=5252 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 4:
"[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" id=73 idx=0x120 tid=5496 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 5:
"[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" id=93 idx=0x170 tid=1160 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 6:
"[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" id=94 idx=0x174 tid=4032 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 7:
"[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" id=97 idx=0x180 tid=2084 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 8:
"[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" id=98 idx=0x184 tid=5844 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 9:
"[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" id=99 idx=0x188 tid=924 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 10:
"[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" id=100 idx=0x18c tid=5316 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 11:
"[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" id=102 idx=0x194 tid=4868 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 12:
"[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" id=103 idx=0x198 tid=5160 waiting for java/lang/Class@0x2BC1BCE8 held by:
"[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" id=96 idx=0x17c tid=5252 in chain 3
Chain 13:
"[ACTIVE] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" id=104 idx=0x19c tid=5192 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 14:
"[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'" id=105 idx=0x1a0 tid=5224 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 15:
"[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'" id=106 idx=0x1a4 tid=5360 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 16:
"[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" id=108 idx=0x1ac tid=5536 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 17:
"[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" id=109 idx=0x1b0 tid=5156 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Chain 18:
"[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" id=112 idx=0x1bc tid=5428 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 in chain 1
Open lock chains
================
Chain 1:
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" id=22 idx=0x60 tid=4600 waiting for com/fatcity/logging/RotatingFileLogger@0x2B703780 held by:
"[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" id=107 idx=0x1a8 tid=1720 (active)
Edited by: Allan Andersen on 2010-09-03 06:59

02-Oct-200705:53 PM
joevpt wrote:
You'd think... Eh!
What I found was that at various stages during the upgrade the NSU disconnects from the phone (which allows PC-Suite reconnect). When the NSU needs to reconnect, PC-Suite was holding onto the connection (because, I think, NSU only disconnects it once at the beginning... )
Regards,
Joe
Patheticlly true.

HT4053 I have no idea how to use this phone....just got it today so I get it..but I cannot figure out what the heck to do

As much as I appreciate this computer geek...first thing said is when you get to the help screen...have not gotten there yet..any idea's?

Look at this https://www.apple.com/support/iphone/essentials/
And consult this
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Problems - just how stable is this stuff?

I've been getting to grips with the Digital Publishing Suite for over a week now (InDesign 5.0 plus Folio Builder etc.) and like alot of others on this site have had a series of minor and major issues, then just when I thought things were starting to go well...I decided to update the Content Viewer and Tools!
Result = disaster. I now have a Content Viewer that will not download the updated Folio and when I try to delete the Articles to rebuild the Folio, I get a 'Network failure' notice in InDesign. As I can't download the Folio it won't even give me the option of archiving to delete it in the Content Viewer, to start again.
What's going on with Adobe?
I'm working from a free Adobe.com account so perhaps the big publishers on the paid for area are having a better time. I may be just one of god knows how many freelance or small company designers but surely we, as long serving and loyal customers, deserve better service than Adobe appears to providing with this set of software.
Reading all the forum posts the whole Digital Publishing Suite rollout looks as though it was done in a rush - is it just me or do thers feel like they are in the middle of an unofficial Beta test?
Just another frustrated designer.

Don't panic, this sometimes happens with lingering bits of old folio that need refreshing with an app update.
Uninstall Content Viewer from your iPad. Delete Content Viewer from iTunes, and sync. Power down your iPad and then power back on (clears any naughty memory). Reinstall the new Content Viewer from the App Store. Launch it, log in anew and download your folio anew.
Ali

Exactly how bad is this explain plan?

Hi,
I'm on Oracle 9i - 9.2.0.6.0.
First, please excuse my question, I'm not that good at reading explain plans.
I have this explain plan:
| Id | Operation                                 | Name                      | Rows | Bytes |TempSpc| Cost (%CPU)|
|   0 | SELECT STATEMENT                          |                            | 70057 |    20M|       |   114K (12)|
|* 1 | FILTER                                   |                            |       |       |       |            |
|   2 |   TABLE ACCESS FULL                       | DUAL                       |    82 |       |       |     3 (34)|
|* 3 |   INDEX RANGE SCAN                        | CHANGELOG_1                |     1 |    44 |       | 2217   (3)|
|   4 | NESTED LOOPS OUTER                       |                            | 70057 |    20M|       |   114K (12)|
|   5 |   NESTED LOOPS OUTER                      |                            | 67062 |    18M|       |   113K (11)|
|   6 |    NESTED LOOPS OUTER                     |                            | 64194 |    16M|       |   111K (10)|
|   7 |     NESTED LOOPS OUTER                    |                            | 61450 |    14M|       |   110K (9)|
|   8 |      NESTED LOOPS OUTER                   |                            | 58823 |    13M|       |   109K (8)|
|   9 |       NESTED LOOPS OUTER                  |                            | 56308 |    12M|       |   107K (6)|
| 10 |        NESTED LOOPS OUTER                 |                            | 53900 |    11M|       |   106K (5)|
| 11 |         NESTED LOOPS OUTER                |                            | 51596 |    10M|       |   105K (4)|
| 12 |          NESTED LOOPS OUTER               |                            | 49390 | 9212K|       |   104K (3)|
| 13 |           NESTED LOOPS OUTER              |                            | 47278 | 8310K|       |   102K (2)|
|* 14 |            HASH JOIN                      |                            | 31639 | 5067K| 4576K| 7331 (13)|
|* 15 |             HASH JOIN                     |                            | 31639 | 4202K| 1936K| 1372   (9)|
| 16 |              TABLE ACCESS FULL            | COMPANY                    | 76111 | 1040K|       |   335 (15)|
|* 17 |              HASH JOIN                    |                            | 31649 | 3770K|       |   933   (7)|
| 18 |               TABLE ACCESS FULL           | AGREEMENT                  |   149 | 3129 |       |     3 (34)|
|* 19 |               HASH JOIN                   |                            | 31649 | 3121K|       |   928   (6)|
| 20 |                TABLE ACCESS FULL          | CONCRETEAGREEMENT          | 34172 |   333K|       |    55 (24)|
|* 21 |                TABLE ACCESS BY INDEX ROWID| SPECIFICATION              | 31649 | 2812K|       |   866   (4)|
|* 22 |                 INDEX RANGE SCAN          | SPECIFICATION_DATE         | 37437 |       |       |   143   (5)|
| 23 |             TABLE ACCESS FULL             | PERSON                     | 1786K|    47M|       | 4584 (11)|
|* 24 |            TABLE ACCESS BY INDEX ROWID    | INFORMATION                |     1 |    16 |       |     4 (25)|
|* 25 |             INDEX RANGE SCAN              | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 26 |           TABLE ACCESS BY INDEX ROWID     | INFORMATION                |     1 |    11 |       |            |
|* 27 |            INDEX RANGE SCAN               | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 28 |          TABLE ACCESS BY INDEX ROWID      | INFORMATION                |     1 |    14 |       |            |
|* 29 |           INDEX RANGE SCAN                | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 30 |         TABLE ACCESS BY INDEX ROWID       | INFORMATION                |     1 |    14 |       |            |
|* 31 |          INDEX RANGE SCAN                 | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 32 |        TABLE ACCESS BY INDEX ROWID        | INFORMATION                |     1 |    11 |       |            |
|* 33 |         INDEX RANGE SCAN                  | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 34 |       TABLE ACCESS BY INDEX ROWID         | INFORMATION                |     1 |    13 |       |            |
|* 35 |        INDEX RANGE SCAN                   | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 36 |      TABLE ACCESS BY INDEX ROWID          | INFORMATION                |     1 |    12 |       |            |
|* 37 |       INDEX RANGE SCAN                    | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 38 |     TABLE ACCESS BY INDEX ROWID           | INFORMATION                |     1 |    15 |       |            |
|* 39 |      INDEX RANGE SCAN                     | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 40 |    TABLE ACCESS BY INDEX ROWID            | INFORMATION                |     1 |    17 |       |            |
|* 41 |     INDEX RANGE SCAN                      | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
|* 42 |   TABLE ACCESS BY INDEX ROWID             | INFORMATION                |     1 |    17 |       |            |
|* 43 |    INDEX RANGE SCAN                       | INFORMATION_SPECIFICATION |     2 |       |       |     3 (34)|
---------------------------------------------------------------------------------------------------------------------                     I can see that there are some FULL TABLE SCAN, but this may be OK. What worries me is the combination with numerous NESTED LOOPS.
A CTAS for approx 500.000 records out of 14.000.000 runs in about 180 mins. This is too much. My guess is that it should/could be brought down to something like 20 min.
For completeness, the query in question:
SELECT *
FROM stik_spec_inf_v
WHERE spdate >= to_date('15-03-2008', 'dd-mm-yyyy')
   AND spdate < to_date('15-04-2008', 'dd-mm-yyyy');Wher eview is created as
CREATE OR REPLACE FORCE VIEW stik_spec_inf_v
AS
   SELECT CAST(1 AS NUMBER(3)) dataversion
         ,sp.ID AS spid
         ,sp."DATE" AS spdate
         ,sp.valuedate
         ,sp.amount
         ,sp.amountcode
         ,sp.periodstart
         ,sp.periodend
         ,sp.ambcode
         ,sp.state AS spstate
         ,sp."TYPE" AS sptype
         ,sp.respitedate
         ,sp.stopcode
         ,sp.validcode
         ,sp.person
         ,sp.company
         ,sp.concreteagreement
         ,sp.reconciliation
         ,sp.partialscheme
         ,(SELECT 1
             FROM dual
            WHERE EXISTS(
                     SELECT 1
                       FROM changelog
                      WHERE targetclass = 'com.csc.jpay.voucher.Specification'
                        AND targetid = sp.ID)) spchanged
         ,i1.startdate AS daekgagedato
         ,i1.amount AS daekgage
         ,i2.startdate AS prmgagedato
         ,i2.amount AS prmgage
         ,i3.employerpercent
         ,i3.employeepercent
         ,i3.voluntarypercent
         ,i5.salaryperiod
         ,i6.groupcontractcode
         ,i7.workinghourspercent
         ,i9.startdate AS hiringdate
         ,i10.startdate AS resignationdate
         ,i21.policenumber
         ,ix."TYPE" AS leavecode
         ,ix.startdate AS leavestartdate
         ,ix.enddate AS leaveenddate
         ,pe.cpr
         ,pe.ksdid
         ,co.opkr_number
         ,a.NAME AS agreement_name
     FROM SPECIFICATION sp
         ,information i1
         ,information i2
         ,information i3
         ,information i5
         ,information i6
         ,information i7
         ,information i9
         ,information i10
         ,information i21
         ,information ix
         ,person pe
         ,company co
         ,concreteagreement ca
         ,agreement a
    WHERE 1 = 1
      AND i1.SPECIFICATION(+) = sp.ID
      AND i1."TYPE"(+) = 1
      AND i2.SPECIFICATION(+) = sp.ID
      AND i2."TYPE"(+) = 2
      AND i3.SPECIFICATION(+) = sp.ID
      AND i3."TYPE"(+) = 3
      AND i5.SPECIFICATION(+) = sp.ID
      AND i5."TYPE"(+) = 5
      AND i6.SPECIFICATION(+) = sp.ID
      AND i6."TYPE"(+) = 6
      AND i7.SPECIFICATION(+) = sp.ID
      AND i7."TYPE"(+) = 7
      AND i9.SPECIFICATION(+) = sp.ID
      AND i9."TYPE"(+) = 9
      AND i10.SPECIFICATION(+) = sp.ID
      AND i10."TYPE"(+) = 10
      AND i21.SPECIFICATION(+) = sp.ID
      AND i21."TYPE"(+) = 21
      AND ix.SPECIFICATION(+) = sp.ID
      AND ix."TYPE"(+) > 10
      AND ix."TYPE"(+) < 21
      AND pe.ID = sp.person
      AND co.ID = sp.company
      AND ca.ID = sp.concreteagreement
      AND a.ID = ca.agreement;Please excuse my lengthy post. I still hope for some valuable input.
Thanks
Peter

Hi,
I have tried with an in-line view as John suggested. This give a FULL TABLE SCAN on information.
SELECT /*+ RULE */ * FROM (
    SELECT sp.id spid, sp."DATE" spdate
     FROM (SELECT   SPECIFICATION
                   ,max(decode("TYPE", 1, startdate)) daekgagedato
                   ,max(decode("TYPE", 1, amount)) daekgage
                   ,max(decode("TYPE", 2, startdate)) prmgagedato
                   ,max(decode("TYPE", 2, amount)) prmgage
                   ,max(decode("TYPE", 3, employerpercent)) employerpercent
                   ,max(decode("TYPE", 3, employeepercent)) employeepercent
                   ,max(decode("TYPE", 3, voluntarypercent)) voluntarypercent
                   ,max(decode("TYPE", 5, salaryperiod)) salaryperiod
                   ,max(decode("TYPE", 6, groupcontractcode)) groupcontractcode
                   ,max(decode("TYPE", 7, workinghourspercent)) workinghourspercent
                   ,max(decode("TYPE", 9, startdate)) hiringdate
                   ,max(decode("TYPE", 10, startdate)) resignationdate
                   ,max(decode("TYPE", 21, policenumber)) policenumber
                   ,max(decode(sign("TYPE" - 10),1, decode(sign("TYPE" - 21), -1, "TYPE"))) leavecode
                   ,max(decode(sign("TYPE" - 10),1, decode(sign("TYPE" - 21), -1, startdate))) leavestartdate
                   ,max(decode(sign("TYPE" - 10),1, decode(sign("TYPE" - 21), -1, enddate))) leaveenddate
               FROM information
              WHERE TYPE BETWEEN 1 AND 21
           GROUP BY SPECIFICATION) i
         ,SPECIFICATION sp
    WHERE 1 = 1
      AND sp.ID = i.SPECIFICATION)
WHERE spid = 1Any ideas on how to get around that?
Regards
Peter

I have brought an Apple iphone 4 from Apple store Arndale house for use any network, but this phone is locked with vodafone. Please suggest, how to unlock this phone to use all other network in other country?

Dear Team,
i had brought a APPLE IPHONE4 from APPLE STORE, MANCHESTER ARNDALE. new cannon street mall.
when i was visiting for purchasing this device the sales team told me that the phone is unlocked and can use all around the world with any other network when i'm trying to use it other network it showed that NO SERVICE(at network issue) and then i made a call 2 apple customer support so the executive told me that this device has been locked with VODAFONE UK network. this was the FAKE commitment of sales team also its a CHEATING i must say that.
i'm very much disapointed and dissatiesfied with the APPLE STORE sales team...
kindely look toward and give me solution.
thanks,
regard,
Nishant Kumar

I had read that thanks but many happy owners of locked iPhones
claim to have bought from an Apple store they do not actually mean
Apple Retail
Arndale Centre is one of the largest Malls in Europe and every vendor of iPhones is there
Apple retail in UK ONLY sell unlocked iPhones unless you opt for a contract at a reduced price
not something you can do accidently as in sim free in US
But thanks for you guidance

Another battery expansion... How bad is this?

I was using my faithful MacBook Pro 17" to watch a 1080p video on my 42" LCD television, when I noticed that book was lifting up awkwardly. I turned it over and was startled to see the battery bulging from the laptop.
At first I was startled and turned the system off, then proceeded to remove the battery. I googled for similar situations and found it was more common than I would have expected.
It is a few few years old (I think it's an '08) model. What steps should or can I take regarding this situation; Is this covered by Apple or will I have to "bite the bullet" here and buy a new battery?

Has this really happened? Having spoken with multiple "Authorized Apple" technicians, I'm told that this is an isolated issue that is usually replaced after a phone call to Apple. Well, I've phoned Apple after being sent BY Apple to these technicians.
The result? I was told about all the customers that got free batteries for the same exact problem. In fact, I was told they were outside of their warranty period, AND did not require extended "AppleCare" due to the nature of this odd and rare occurrence. Furthermore, I was told that these batteries were replaced within three years from the date of purchase.
My laptop is NOT older than three years.
My laptop has been in the repair shop within the last few months already, and now my "laptop" cannot even leave the proximity of its power cord.
I think I may be beginning to lose faith in the Apple brand.

Just how bad is this phone ? (E70 revisited)

Similar Messages

Maybe you are looking for