Just how "dangerous" is the Magsafe magnet to DV tapes and such?

Hello!
I just upgraded to a new, 2.2ghz MBP - very nice. I noticed however that the magnet in the Magsafe power port on the MBP itself is very strong - and the user guide says to keep sensitive things (like iPods and credit cards) at least 1" from that corner.
This isn't a huge problem, but I'm worried about how far the magnet can actually damage things like DV video tapes, which are more sensitive to magnetic fields than an iPod hard drive or credit card ribbon. For example, when using my Powerbook, I would sometimes drop a DV tape (in its box) into my laptop case when carrying my Powerbook. The pocket I'd use is inside the case, right up against the machine itself - it would be a little more than half way between the Magsafe port and front of the MBP, if I put the Mac in the case like I normally do - about 4-5".
Thanks for clarifying for me, I'm not familiar enough with strong magnets to be sure whether or not it's a problem.
-Dan

Actually the magnetic field diminishes at a rate that's nearer to the inverse cube of distance. So at 2 inches the effect is less than 15% what it is at 1 inch.
You should keep sensitive stuff away from changing magnetic fields, but the constant field from the magsafe connector will have little effect on most magnetic storage media.

Similar Messages

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
To add a new page to an existing document go to Insert > Sections > Blank.

Just how bad is the HD screen on the T530

Hey everyone. I'm buying a laptop for my father whose main criteria are:
Overall build quality
(backlit) Keyboard and trackpad quality
At least 15" screen
Upgradeability
International warranty and customer service
Whilst it is overkill for what he wants to do, AFAICS the T530 is the only thinkpad that fits the bill.
The only problem is his eyesight isn't what it used to be and he needs eye-glasses to read the screen on his current laptop which has a 15" 1366x768 display. Hence, a higher resolution screen is out of the question (I understand there is dpi scaling but it is never implemented perfectly across all apps).
I see people warning against the HD display all the time, so I'd like to know just how bad is the contrast, colour reproduction etc?

I understand where you're coming from however I don't mean travel like how a businessman travels. My father just spends a lot of time abroad and an external monitor will not be practical. I'm surprised no-one seems to have any experience with the HD screen. Thank you for your suggestions though.

How to recover the deleted SMS message, Contacts, CallHistory and Photos from ipad.

how to recover the deleted SMS message, Contacts, CallHistory and Photos from ipad.

If you did the backup of your data before deleting then you can easily get back the data by the following steps:
1. First don’t connect your iPad directly to computer because the iTunes only saves the most recent backup
2. Now make sure that you have a valid backup as listed iTunes> preferences> devices
3. Before connecting your iPad make sure to check iTunes>preferences> devices "prevent iPad from syncing automatically." Because this will ensures we don't erase the previously stored backup. Then select ok and close the window after checking " don't sync"
4. Now connect your iPad to your computer .
5. Select the iPad as seen in the left bar of iTunes, as listed under the devices .
6. Select version and click on restore from options.
7. It takes a while to for iPad to erase itself, reset and restart.
8. After the iPad is restart you will see Set Up Your iPad in iTunes on your computer, and now just click the restore from the backup and click continue. It will take 10 to 12 minutes to recover your data from iPad, including the deleted sms, notes, photos, music, contacts etc.
Here is a step by step guide for you: http://www.video-converter-mac.org/recover-deleted-ipad/

How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

How to prolong the bluetooth timeout session on ipad and iphone

how to prolong the bluetooth timeout session on ipad and iphone?
I understannd that the standard timeout setting is 3 mins. what if I want to prolong the connection duration, how should I do?
thanks

To my knowledge, there is no "time out" on a device. A mouse, KB, etc will go into a low power mode after a short period of non-use.
Barry

How to share the same session between JNLP Application and browser session

How to share the same session between JNLP Application and browser session using BasicService.showDocument(url) method? It appears whenever i launch any URL from within a JNLP application using BasicService.showDocument(url) , it creates new instance of browser and session even after i used cooke handlers to restore JSESSIONID and Ltpa token etc.
public static int showDocument(String urlToOpen)
BasicService obj = (BasicService) ServiceManager.lookup("javax.jnlp.BasicService");
obj.showDocument(urlToOpen);
}

Try using Reflection

How to insert the style in sap-script? and in smart form?

how to insert the style in sap-script? and in smart form?

Hi..,
For SAP scripts u need to create them in SE72 ...
and u can include them in the script editor as..
/: STYLE <STYLE-NAME>
P1 text............... (*** P1 is the Paragraph format created in SE72 )
/: STYLE *
For smartforms u need to go for the transaction (tcode) SMARTSTYLES... here u can create paragraph and character formats globally...
<b>Sunil, plz do remember to close all your threads, when ur problem is solved !!</b>
reward all helpful answers,
sai ramesh

How do you get music from your Itunes to your computer? im making a wedding video on windows movie maker but cant figure out how to get the bridal music off my ipod and onto my pc.

Im making a wedding video and cant figure out how to get the bridal music off my itunes and onto my computer.. Im using the windows movie maker

Marian,
Let's be clear on one thing here. The manual setting is an iPod setting, not an iTunes one. So, once you've set it to manual (and you appear to have done that correctly), then you can connect it to any number of computers without changing that setting.
"The grey thing occurs on one pc only"
This is the thing that I don't understand, if your iPod is set to manual, then it shouldn't happen on any computer. If you connect the iPod that is set to manual to this pc, and then click on it in the source listing, then you would be looking at the songs on the iPod, and they should not be greyed out. When you connect to the "other pc" under these same circumstances, they are not greyed out?

How to get the query result of improvement (Before and After ) using sql de

how to get the query result of improvement (Before and After ) using sql developer.

Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html

How to get the link between mara, ausp, cawn and cawnt tables

hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soni

Hi,
Sample report using the linkage between tables;
report batch_char no standard page heading
                          line-size 132
                          line-count 58(1)
                          message-id mm.
       Report by Batch Characteristic                                *
Description          : Report by Batch Characteristic                *
Declaration for Tables
tables: mara,    " Material Master
        mard,    " Storage Location Data for Material
        t001w,   " Plants/Branches
        t001l,   " Storage Locations
        cabn,    " Characteristics
        inob.    " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023',     " Class Type
            c_obtab like inob-obtab value 'MCH1',    " Database Table
            c_flag type c          value 'X',       " Flag
            c_c23   type i          value '23',      " Ratio
Constants for Ratio Categories
            c_13    type p decimals 2 value '13.00', " For Ratio 13
            c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
            c_15    type p decimals 2 value '15.00', " For Ratio 15
            c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
            c_17    type p decimals 2 value '17.00', " For Ratio 17
            c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
            c_19    type p decimals 2 value '19.00', " For Ratio 19
            c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
            c_21    type p decimals 2 value '21.00', " For Ratio 21
            c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
            c_23    type p decimals 2 value '23.00', " For Ratio 23
            c_g23(4) type c value '>=23',            " For Ratio >=23
            c_ratio(5) value 'RATIO',                  " For Ratio
Constants for Storing Selected item field information
            c_cursor1(15) value 'I_OUTPUT1-MEINS',   " For Selected Base
                                                     " Unit of Measure
            c_cursor2(15) value 'I_OUTPUT1-MATNR',   " For Selected Base
                                                     " Material Number
            c_cursor3(15) value 'I_OUTPUT1-MAKTX',   " For Selected Base
                                                     " Material Des.
            c_cursor4(15) value 'I_OUTPUT1-CLABS',   "For Selected Base
                                                     " Stock Value
            c_cursor5(15) value 'I_OUTPUT1-ATFLV',   " For Selected Base
                                                    " Char.Value (Ratio)
            c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c,                            " Flag
       g_clabs1(16) type c,                       " Quantity
       g_clabs(18) type c,                       " Quantity
       g_cursor(15) type c,                       " Cursor field name
       g_matnr     type mara-matnr,               " Material Number
       g_werks     type mchb-werks,               " Plant
       g_atinn(30) type c.                        " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
         matnr like mchb-matnr,      " Material Number
         werks like mchb-werks,      " Plant
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Unit of measure
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         atinn like ausp-atinn,      " Char.Value
         clabs like mchb-clabs,      " Stock Value
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
         werks like t001w-werks,     " Plant
         name1 like t001w-name1,     " Name
       end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
         matnr like makt-matnr,      " Material
         maktx like makt-maktx,     " Description
       end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
         objek like ausp-objek,      " Object No
         atinn like cabn-atinn,      " Characteric value
         atflv like ausp-atflv,      " Characteristic Value
       end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv like ausp-atflv,      " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv(32) type c,           " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output1.
       Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
                s_lgort for t001l-lgort,             " Stor.Location
                s_matnr for mara-matnr obligatory, " Material No
                s_atinn for cabn-atinn.              " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
    perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
    perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
      Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
    select werks
      into t001w-werks
      from t001w
      up to 1 rows
      where werks in s_werks.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Plant'(002).
    endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
    select matnr
      into mara-matnr
      from mara
      up to 1 rows
      where matnr in s_matnr.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Material'(003).
    endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
    select lgort
      into t001l-lgort
      from t001l
      up to 1 rows
      where lgort in s_lgort.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Storage Location'(004).
    endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
    select atinn
      into cabn-atinn
      from cabn
      up to 1 rows
      where atinn in s_atinn.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Characteristic Value'(005).
    endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
    into (mard-matnr, mard-werks, mard-lgort)
    from mard
    up to 1 rows
    where matnr in s_matnr and
          werks in s_werks and
          lgort in s_lgort.
endselect.
if sy-subrc <> 0.
    message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform.                          "validate_screen
*&      Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
       exporting
            repid    = l_repid
            heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18)   'Material Number'(008) centered,
          20 sy-vline, 21(40) 'Material Description'(011) centered,
          61 sy-vline, 62(22) 'Ratio'(009) centered,
          84 sy-vline, 85(18) 'Quantity'(010) centered,
         103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
         125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform.                    "get_headings
*&      Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr       " Material Number
         b~werks       " Plant
         b~lgort       " Storage Location
         b~charg       " Batch Number
         b~clabs       " Stock Value
         a~meins       " Base Unit of Measure
      into table i_mchb
      from mara as a inner join mchb as b
      on amatnr eq bmatnr
      where b~matnr in s_matnr and
            b~werks in s_werks and
            b~lgort in s_lgort.
if sy-subrc <> 0.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
    stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform.                    " get_mat_stock_data
*&      Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
    clear i_plant.
    refresh i_plant.
    select werks      " Plant
           name1      " Name
      into table i_plant
      from t001w
      for all entries in i_mchb
      where werks = i_mchb-werks.
Get the Material Description from MAKT Table
    clear i_makt.
    refresh i_makt.
    select matnr      " Material number
           maktx      " Material Description
      into table i_makt
      from makt
      for all entries in i_mchb
      where matnr = i_mchb-matnr and
            spras = sy-langu.
    sort i_plant by werks.
    delete adjacent duplicates from i_plant comparing werks.
    sort i_makt by matnr.
    delete adjacent duplicates from i_makt comparing matnr.
endif.
endform.                   "form get_plant_grp_data.
*&      Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
         l_tabix like sy-tabix.
if not i_mchb[] is initial.
    loop at i_mchb.
      l_tabix = sy-tabix.
      clear l_matbatch.
      concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
      move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
        read table i_plant with key werks = i_mchb-werks binary search.
        if sy-subrc = 0.
          i_output-name1 = i_plant-name1.
        endif.
Get the Material Description from i_makt Table
      read table i_makt with key matnr = i_mchb-matnr binary search.
      if sy-subrc = 0.
        i_output-maktx = i_makt-maktx.
      endif.
Get the Characteristic Values data from INOB and AUSP Tables
      clear inob.
      select single cuobj from inob
          into inob-cuobj
          where klart = c_klart and
                obtab = c_obtab and
                objek = l_matbatch.
      if sy-subrc = 0.
        select objek
               atinn
               atflv
           from ausp
           into table i_ausp
           where objek = inob-cuobj and
                 atinn in s_atinn   and
                 klart = c_klart.
        sort i_ausp by objek atinn.
        loop at i_ausp.
          clear cabn.
          select single atinn atnam from cabn
                     into (cabn-atinn,cabn-atnam)
                     where atinn = i_ausp-atinn.
          if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
            if cabn-atnam cs c_ratio.
              if i_ausp-atflv between c_13 and c_1499.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
              elseif i_ausp-atflv between c_15 and c_1699.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
              elseif i_ausp-atflv between c_17 and c_1899.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
              elseif i_ausp-atflv between c_19 and c_2099.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
              elseif i_ausp-atflv between c_21 and c_2299.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
              elseif i_ausp-atflv >= c_23.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_23.
              endif.           " Condition for RATIO values
            else.              " If characteristic does contain RATIO
              i_mchb-atflv = i_ausp-atflv.
            endif.
            i_output-atinn = cabn-atinn.
            i_output-atnam = cabn-atnam.
            i_output-atflv = i_ausp-atflv.
            i_mchb1-matnr = i_mchb-matnr.
            i_mchb1-werks = i_mchb-werks.
            i_mchb1-lgort = i_mchb-lgort.
            i_mchb1-charg = i_mchb-charg.
            i_mchb1-clabs = i_mchb-clabs.
            i_mchb1-atinn = i_ausp-atinn.
            i_mchb1-atflo = i_mchb-atflv.
            i_mchb1-atflv = i_ausp-atflv.
            append : i_output, i_mchb1.
            clear i_mchb1.
            modify i_mchb index l_tabix transporting atflo atflv .
          endif.
        endloop.
      endif.
    endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
    sort i_output by atinn werks matnr atflv.
else.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform.                    "append_final_data
*&      Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
    l_tabix = sy-tabix.
At new Characteristic
     at new atinn.
      read table i_output1 index l_tabix.
      format color 1 intensified on.
      write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
             23(40) i_output1-atnam,
             125 sy-vline.
      format color off.
      format color 4 intensified on.
      write: /1 sy-vline, 2(20) 'Plant Name         :'(022),
             23(4) i_output1-werks, 29(30) i_output1-name1,
             125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
    clear: g_clabs, g_clabs1.
    format color col_normal.
    write :/1 sy-vline, 2(18)   i_output1-matnr,
           20 sy-vline, 21(40) i_output1-maktx,
           61 sy-vline.
    if i_output1-atflv = c_c23.
      write: 62(22) c_g23 centered.
    else.
      shift i_output1-atflv left deleting leading space.
      write: 62(22) i_output1-atflv centered.
    endif.
    write: 84     sy-vline,
           103     sy-vline,
           110(5) i_output1-meins.
If the quantity value is negative
    if i_output1-clabs ge 0.
      write: 85(18) i_output1-clabs unit i_mchb-meins,
            125     sy-vline.
    else.
      i_output1-clabs = - i_output1-clabs.
      write i_output1-clabs unit i_mchb-meins to g_clabs1.
      condense g_clabs1.
      concatenate '(' g_clabs1 ')' into g_clabs separated by space.
      write: 85(18) g_clabs right-justified,
           125 sy-vline.
    endif.
    format color off.
    hide : i_output1.
    new-line.
At end of material
    at end of matnr.
      sum.
      move : i_output1-matnr to g_matnr.
      format color 3 intensified on.
      write /1(125) sy-uline.
      write :/1 sy-vline, 2(25) 'Total for Material      :'(012),
             28(18) g_matnr.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      write: 125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of plant
    at end of werks.
      sum.
      move : i_output1-werks to g_werks.
      format color 3 intensified off.
      write :/1 sy-vline, 2(25) 'Total for Plant          :'(013),
             28(4) g_werks.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of characteristic
    at end of atinn.
      read table i_output1 index l_tabix.
      sum.
      format color 3 intensified on.
      write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
             28(25) i_output1-atnam.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
endloop.
endform.                    " display_report
*&      Form DISPLAY_BATCH
     Display the batch details for the seclected material            *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
     g_cursor = c_cursor2 or
     g_cursor = c_cursor3 or
     g_cursor = c_cursor4 or
     g_cursor = c_cursor5 or
     g_cursor = c_cursor6.
    format color 3.
    write: /1 sy-vline,
            2(17) 'Material Number :'(020),
           20(17) i_output1-matnr,
           94 sy-vline.
    format color off.
    write /1(94) sy-uline.
    loop at i_mchb1 where matnr = i_output1-matnr and
                          atinn = i_output1-atinn and
                          atflo = i_output1-atflv.
      format color col_normal.
      shift i_mchb1-charg left deleting leading '0'.
      write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
             18 sy-vline, 19(17) i_mchb1-charg centered,
             36 sy-vline.
      if i_output1-atnam cs c_ratio.
        write: 37(29) i_mchb1-atflv
                       exponent 0 decimals 2 centered.
      else.
        write : 37(29) i_mchb1-atflv
                      exponent 0 decimals 0 centered.
      endif.
      write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
              94 sy-vline.
      format color off.
    endloop.
    write /1(94) sy-uline.
else.
    message s899 with 'Invalid cursor position'(016).
    exit.
endif.
endform.                    " DISPLAY_BATCH
*&      Form HEADING_SECLIST
      Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
         18 sy-vline, 19(17) 'Batch Number'(017) centered,
         36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
         66 sy-vline, 67(27) 'Quantity'(019) centered,
         94 sy-vline.
write /1(94) sy-uline.
format color off.
endform.                    " HEADING_SECLIST
*&      Form COLLECT_RATIO
      Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
    clear g_atinn.
    i_output1-atinn = i_output-atinn.
    i_output1-atnam = i_output-atnam .
    i_output1-werks = i_output-werks.
    i_output1-name1 = i_output-name1.
    i_output1-matnr = i_output-matnr.
    i_output1-maktx = i_output-maktx.
    i_output1-clabs = i_output-clabs.
    i_output1-meins = i_output-meins.
    call function 'CONVERSION_EXIT_ATINN_OUTPUT'
         exporting
              input = i_output-atinn
         importing
              output = g_atinn.
    if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
      if i_output-atflv between c_13 and c_1499.
        i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
      elseif i_output-atflv between c_15 and c_1699.
        i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
      elseif i_output-atflv between c_17 and c_1899.
        i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
      elseif i_output-atflv between c_19 and c_2099.
        i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
      elseif i_output-atflv between c_21 and c_2299.
        i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
      elseif i_output-atflv >= c_23.
        i_output1-atflv = c_23.
      endif.
      write i_output1-atflv to i_output1-atflv .
    else.
      write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
    endif.
    collect i_output1.
    clear   i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform.                    " COLLECT_RATIO
Reward if useful..
Regards,
Anji

How to get the link between MCH1, AUSP, CAWN and CAWNT tables

Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar

Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar

My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone

My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty? I have not dropped it in water or anything. It was a normal day and I had 20% battery and I tried to charge my phone and it wouldn't charge. The charging pug box works fine with other phone USB cords so I know its something to do with the charging cord.

Eklms wrote:
My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty?
Yes.
Everything is included in the warranty.

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

Just how "dangerous" is the Magsafe magnet to DV tapes and such?

Similar Messages

Maybe you are looking for