Just instaled but...

hi!
got debian and gparted show me that arch is instaled but don't see the root(/) on mount point is that correct?
http://i38.tinypic.com/10onsow.png
also i can't boot into arch(got this error on grub):
booting arch
root    (hd0,0)
         filesystem type is ext2fs partition type 0x83
kernel    /boot/vmlinuz26 root=/dev/sda1 ro
ERROR 15: FILE NOT FOUND
press any key to continue...

One thing none of you seem to think of (maybe you just aint distro-hopping enough?) is that one distro might see i disk as /dev/hda and another as /dev/sda - it all depends whether or not you enable the scsi-emulation for ide-drives (sata-drives _should_ all be /dev/sda).
Thus, debian might use /dev/hda and archlinux /dev/sda - there is nothing strange about that.
Also - as far as grub is concerned, it doesn't matter what it is - for grub it will always be (hd0,X).
Your menu.lst looks suspect to me - but not knowing which partition you installed arch on doesn't help much (sorry, I cannot see the screenshot you posted). Let us assume you put it all on /dev/sda3 ((hd0,2) above would seem to indicate this) - if you did not also use a seperate boot-partition, then your menu.lst for arch should be
title archlinux
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/sda3
initrd /boot/kernel26.img
However - if you _do_ have a seperate boot partition for arch (say on (hd0,1)), then your menu.lst becomes:
title archlinux
root (hd0,1)
kernel /vmlinuz26 ro root=/dev/sda3
initrd /kernel26.img
Infact - by far the easiest way to deal with multi-booting is to have /boot as part of the root filesystem partition and and install grub on that partition. In your seperate boot-partition, then all you need to do is chainload - so your (hd0,0)/grub/menu.lst should be like this:
title archlinux
root (hd0,2)
chainloader +1
Last edited by perbh (2009-10-28 14:06:43)

Similar Messages

  • Just installed, but telling me trial has expired???

    I just installed the trial program and when I went to try and use it, I received an error message that says that the trial has expired and I must pay $495.00 to use.

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

  • Just installed, but can't find the application anywhere?

    I just spent 3 hours installing Logic Pro on my new 3.06ghz iMac, and I can't find the program at all. It confirmed that I finished installation and that it was ready to be used, and I can locate the loops (aswell as The Numbers Game, which is on my desktop) but Logic Pro is NOWHERE to be seen. Any clue how I can find it? I followed every instruction in the manual. Someone told me to just open a logic file, then logic would open, but that's not working. Please help me.

    Open your harddisk, open the Applications folder, hit command-2, click the Name column and use the alphabet to find *Logic Pro* .

  • Firefox 3.6 just installed but won't open

    SUBJECT: FIREFOX WON'T OPEN. I have used Firefox for years, but upon reinstalling my Vista Home Premium OS, I also had to reinstall all my software. The only problem I had was with Firefox, which appeared to download and install successfully, but refuses to open. I uninstalled and reinstalled it twice from the Internet, but it still won't open from either the desktop icon or the program list under 'Start'. Something seems to be blocking it, but what, and how can I fix this?
    == This happened ==
    Every time Firefox opened
    == June 29, 2010 when my Vista OS was reinstalled ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    Does it start in [[Safe Mode]]? If it does, close the Safe Mode Firefox and open it normally. If it doesn't open, try creating a new profile at [[Managing Profiles]]

  • Just installed but nothing shows up after drag / drop, open file, and bridge

    I've been using CS3 for many years and my work finally got me CS5. After installing and registering my new product I did the usual "drag and drop" with a JPEG image to start a project and this is what shows up:
    As you can see, the loaded image on my layers window as a "background" and on the top tabs, you can see two files that I've attempted to open however when I try to magnify, zoom, etc. nothing shows up in the work area. I even attempted Bridge and File --> Open and I have seen the same results which is nothing showing up on my work space. I even opened a new document and when I open it, the same grey background appears and the new project / file acts like it was never there!
    Is there something that I don't know about CS5 in regards to opening new files? Thank you in advance. 

    Usually, when disabling OpenGL Drawing corrects a screen update issue, that means that your video card is probably capable, but the driver is out of date and faulty.
    Try going to the web site of the maker of your graphics card and downloading/installing their latest driver for your hardware and OS.  Then try re-enabling OpenGL Drawing.  You might well find it all works great, and you'll gain access to the OpenGL-specific features:
    http://kb2.adobe.com/cps/405/kb405745.html
    -Noel

  • Lion just installed but now Parallels file lost?

    Please could anyone give advice re Parallels drive being lost after installing Lion?  I have therefore downloaded Parallels 7 as I was using version 5 prior to the Lion.  Totally confused.....!

    Do  you have an Intel iMac? You've posted this in the PPC section.
    Lion would not delete any files although it might quarantine incompatible applications. Perhaps you should do some Spotlight searching of your drive. You will need Parallels 7 with Lion. The version you have been using is not compatible.

  • Flas player 11 installed but not working

    the adobe flash player 11 was just installed but i can not use it for games or videos what can i do?

    Without any more info than that, it's really anybody's guess.
    What OS and what browser do you use?

  • Have just installed PE12 with no install problems. Share preference does not show any email preferences, just the default Adobe.

    PE12 just installed, but Organizer share preference for emailing photos does not show any email preferences except the default Adobe. Have Visa with Windows Mail. Previous PE worked OK.  How to resolve?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Just installed LE9, but no drum loops - does that sound right?

    Hi,
    I've just installed Logic Express 9 and there were no drum loops, along with lots of other loops in the Loop browser that were greyed out.
    Does Logic Express only come with a few loops, or has something gone wrong in install?
    I have managed to find all the Apple loops from Garage Band and have manually added them to the library, but I was hoping Logic Express would have loops of its own, especially in drums which I found a bit limiting in Garage Band.
    Thanks in advance...

    That depends on how you installed LE. Were you using Custom Install option?
    Typically, LE installation program copies both Logic and its content to your Macintosh HD, but you may choose whether to perform a full installation (software + content) or to install just software without content, using Custom Install, to save the disk space. My guess is, you just installed the program without content (drum loops, etc.) I think, you may try to re-install it, without using the custom install option.

  • I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

    I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work.  I did everything I was to install it correctly but it still does not install it correctly.  Can some help me.  Bob

    Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
    You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
    http://www.etresoft.com/etrecheck
    It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
    Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
    Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

  • ITunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    iTunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
    tt2

  • I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

    I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

    Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

  • I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

    I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

    When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

  • Just installed Final Cut Express 4 but doesn't open

    Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

    Al's suggestion should solve the problem.
    However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
    For a permanent cure edit the info.plist like this:-
    1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
    2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
    3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
    4. Close the window and when asked if you want to save the changes, say yes.

  • Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    A few suggestions for you:
    Try:
    uninstall all HP utilities or other HP apps on your Mac
    see if there is updated software on the HP website
    go to System Preferences > Printers & Scanners > Print
    control-click on your printer in the column on the left
    select "Reset Printing System..." and "reset" in the dialog that follows
    Do a factory reset on your printer
    go back to printers & scanners and it should see your printer and download a driver for it from Apple

Maybe you are looking for

  • Wrong path to application

    Hello, i try to call a application in a war (which is in an ear); but the path the server take is the wrong one. he always take: D:\usr\sap\P64\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\... Can i ch

  • Executing Stored Procedure from TOAD: ORA-00900: invalid SQL statement

    Ok-I have ALL the stored procedures converted into Oracle-now, when I go to test them I am getting the vague error of: ORA-00900: invalid SQL statement I am attempting to execute: --EXEC IEXGetAgentSysPerf(to_date('2008/09/01', 'yyyy/mm/dd/'), to_dat

  • Function level personalizations

    Hi, I want to know how can we export the function level personalizations from one instance and import them to any other instance. This is very urgent. Please let me know as soon as possible. Thanks and Regards, Sandhya

  • How do I Publish site to another .mac account

    Hey I made a site for a friend and she just got herself a .mac account. What's the easiest way to tranfer the site off of my account over to hers? I know it's probably a stupidly easy solution but I would appreciate any help. Dual 2.0 G5   Mac OS X (

  • Error 1015 on iphone 3g?:c

    I try to update and this thing mark me error, and then when I try to restore MARKS ME THE SAME! :c