Just Installed 10.4.10 and...

I just installed OS 10.4.10 and my desktop/finder keeps restarting every minute. Has this happened to anybody? How in the **** do I stop this?

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695

Similar Messages

  • Just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen.  When I click on it to reopen it doesn't and I

    just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen.  When I click on it to reopen it doesn't and I get the same message again.  I rebooted computer, still did it,  I uninstalled and reinstalled the program and I am still getting the same error message.  This is on Mac OS with yosemite.  Any Ideas Please!!!

    Thread 8:
    0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
    2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
    5   com.apple.AppKit               0x00007fff8e85533b _NSEventThread + 137
    6   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    7   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    8   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 9:: cr_scratch
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   com.adobe.CameraRaw           0x000000012122478b 0x120c28000 + 6277003
    2   com.adobe.CameraRaw           0x00000001211ad48b 0x120c28000 + 5788811
    3   com.adobe.CameraRaw           0x0000000120fad001 0x120c28000 + 3690497
    4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 10:
    0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
    2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
    5   com.apple.CoreFoundation       0x00007fff977ccef1 CFRunLoopRun + 97
    6   com.adobe.ols.library         0x00000001235ebc86 OLSHTTPTransaction::Execute() + 4166
    7   com.adobe.ols.library         0x00000001236174f9 OLSServiceTask::PerformMessageExchangeServerPOST(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1849
    8   com.adobe.ols.library         0x000000012360958a OLSServiceTask::PerformMessageExchangeServer(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1834
    9   com.adobe.ols.library         0x000000012361626c OLSServiceTask::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 1804
    10  com.adobe.ols.library         0x00000001235c885c OLSClientSession::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 124
    11  com.adobe.ols.library         0x00000001235c6921 OLSClientSession::ProcessMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 2593
    12  com.adobe.ols.library         0x0000000123608d3a OLSServiceTask::ExecuteStateMessageExchangeServer() + 426
    13  com.adobe.ols.library         0x00000001236010cc OLSServiceTask::ExecuteInternal() + 1196
    14  com.adobe.ols.library         0x000000012361b22e OLSTask::Execute() + 350
    15  com.adobe.ols.library         0x000000012361c874 OLSWorkerThreadTaskManager::ProcessTasks(OLSTaskThread*) + 1300
    16  com.adobe.ols.library         0x000000012361b454 OLSTaskThread::Run() + 36
    17  com.adobe.ols.library         0x000000012363fd88 OLSThread::ThreadProc(void*) + 54
    18  com.apple.CoreServices.CarbonCore 0x00007fff9c7108dc PrivateMPEntryPoint + 58
    19  libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    20  libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    21  libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 11:
    0   libsystem_kernel.dylib         0x00007fff921a475a __sigwait + 10
    1   com.adobe.ElementsOrganizer13 0x000000010dce1a84 0x10cc7e000 + 17185412
    2   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
    3   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    4   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    5   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 12:: com.apple.NSURLConnectionLoader
    0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
    2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
    5   com.apple.CFNetwork           0x00007fff8fcfac80 +[NSURLConnection(Loader) _resourceLoadLoop:] + 434
    6   com.apple.Foundation           0x00007fff90df190a __NSThread__main__ + 1345
    7   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    8   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    9   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 13:: com.apple.CFSocket.private
    0   libsystem_kernel.dylib         0x00007fff921a43fa __select + 10
    1   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    2   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    3   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 14:
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
    2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
    3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
    4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 15:
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
    2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
    3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
    4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 16:: JavaScriptCore::BlockFree
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   libc++.1.dylib                 0x00007fff8fb2ad2e std::__1::condition_variable::__do_timed_wait(std::__1::unique_lock<std::__1::mutex>&, std::__1::chrono::time_point<std::__1::chrono::system_clock, std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000000000l> > >) + 126
    2   com.apple.JavaScriptCore       0x00007fff99593aaa JSC::BlockAllocator::waitForDuration(std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000l> >) + 170
    3   com.apple.JavaScriptCore       0x00007fff993828f4 JSC::BlockAllocator::blockFreeingThreadMain() + 84
    4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
    5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 17:: JavaScriptCore::Marking
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
    2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
    3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
    4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
    5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 18:: JavaScriptCore::Marking
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
    2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
    3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
    4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
    5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 19:: JavaScriptCore::Marking
    0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
    1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
    2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
    3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
    4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
    5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
    6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
    7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x00000000000000b0  rbx: 0x00006080000b4460  rcx: 0x00007fff52f7da08  rdx: 0x00007fff52f7d8c0
      rdi: 0x00006080001d31a0  rsi: 0x0000000000000000  rbp: 0x00007fff52f7d860  rsp: 0x00007fff52f7d830
       r8: 0x00007fff52f7d9d8   r9: 0x00007fff52f7d9a0  r10: 0x0000000000000000  r11: 0x0000000110825b90
      r12: 0x00007fff52f7d9a0  r13: 0x00007fff52f7e0e8  r14: 0x00007fff52f7d8c0  r15: 0x00006080000b4460
      rip: 0x0000000110825ba6  rfl: 0x0000000000010206  cr2: 0x0000000000000000
    Logical CPU:     1
    Error Code:      0x00000004
    Trap Number:     14

  • I just installed adobe creative cloud and Adobe Bridge.

    I just installed adobe creative cloud and Adobe Bridge. When I try to open a image in camera raw I get an error "Bridges parent application is not active" "Bridge requires that a qualifying product has been launched atleast once to enable this feature"

    Have you opened Photoshop? (I think that is a "parent" application)

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • I have an iPhoto library with only Jpeg's in it. I just installed Aperture 3.5 and imported several RAW photos. Shouldn't I now have an Aperture library?

    I have an iPhoto library with only Jpeg's in it. I just installed Aperture 3.5 and imported several RAW photos in Aperture. Shouldn't I now have an Aperture library?

    Should I create an Aperture library and import all of my photos from iPhoto to the new Aperture library? Then delete my iPhoto library entirely?  Just trying to get my library structure correct from the get-go as I plan to shoot only in RAW.
    That is not an easy question. There are still a few glitches with the unified library approach. For example, the new iWork applications will not yet show the Aperture library in the Media Browser, only the current iPhoto library. If you are using iWork with your photolibrary, keep it an iPhoto library.
    And it is unclear, what will happen, when Aperture or iPhoto will be upgraded to newer versions. Right now you need the latest iPhoto version to be able to upgrade older iPhoto libraries, if you want to open them in Aperture. So probably you will need to upgrade iPhoto as well, if you keep your library an iPhoto library, when both Aperture and iPhoto will be upgraded to Aperture 4 and iPhoto 12.0 or similar. In the long run it will be safer to convert the library to an Aperture library, if you do not want to keep updating iPhoto, but that can wait.
    If you want to convert the iPhoto library to an Aperture library, back up your iPhoto library.
    Then create a new Aperture library (with File > Switch to Library > Other/New ) and then import your iPhoto library into Aperture using the command "File > Import > Library" and select your iPhoto library.
    You will need plenty of space on the drive with the new library. Merging a library into another one will  temporarily a lot of working space and may take a long time - several hours for a large library, without visible progress.

  • I have just installed OS X Mavericks and I can't seem to right click on the track pad.

    I have just installed OS X Mavericks and I can't seem to right click on the track pad.
    Also the track pad seems to be slower/ not picking up all my finger movements.

    You might want to take the computer to an Apple Store or an AASP and have them give you an estimate, at least, on how much it would cost to 'fix' the trackpad - I've no idea what the cost would be. The trackpad on MBPs is one of the most sensitive elements in the computer's design. They usually don't go bad, but yours seems to be giving you some trouble: so just make a Genius Bar appointment and just get an estimate - might be something simple.

  • I just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    PS Here is a source for a keyboard.  Try it if you have not done so already
    http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
    For questions about why Word doesn't do something, try
    http://answers.microsoft.com/en-us/mac/forum/macword

  • Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit  battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...

    Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit  battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?

    Have a look at this help document for suggestions that you haven't tried yet:
    http://support.apple.com/kb/TS2570

  • HT1338 Dear  MAC-Friends.  PLEASE HELP ME.  I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.  I have just installed the MOUNTAIN-LION and now I c

    Dear  MAC-Friends.
    PLEASE HELP ME.
    I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.
    I have just installed the MOUNTAIN-LION and now I can´t use my Iphoto-programme without answering the following question:
    Choose another Library ?  ( But I only want the choose the photos which one was in the old iPhoto-Library and not the other photos on the MAC-computer ? ).
    and the other possibility is:
    Create a new Libray ! Which iPhoto-library  ?
    And why create a new and to risq to loose the old photos.
    PLEASE HELP ME.
    Kind regards  FINN GRABOWSKI

    Ok. Let me first ask you, do you have any backups of your files - for example, do you use Time Machine or any other backup system?
    Next, quit iPhoto. In the Finder, go to your Pictures folder. Is there a file there called iPhoto.Library? How large is it? (If it doesn't show the size, click once on it, click cmd-I to see the information). If it's a healthy size (ie, several GB), then that should be your library, and you can double-click it to launch iPhoto. (The application will remember where your library is next time, you can just launch iPhoto normally).
    If that's not the right file, check your Trash. Is there anything in there?
    Matt

  • Lion was just installed by Genius bar and I am updating software.  I downloaded software from Apple to update my Brother MFC-J6710DW printer.  It won't install...have tried 3 times.

    Lion was just installed by Genius bar and I am updating software.  Also did 10.7.4 update.  The driver for my Brother MFC-J6710DW  will not install.  Have downloaded it three times.  When I try to print I get the message that there is new software to install from Software Update.  Grrrr.  Have also tried a reinstall from  the driver on a disk that came with the printer.  Any insights?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I just installed photoshop elements 7 and tried to register and it will not accept my email address

    I just installed photoshop elemants 7 and tried to register and it will not accept my email address.  Help please.  [email protected]

    Hi Jeannet,
    There is nothing in the registration screen which should prevent you from entering any valid email ID unless and untill you are mentioning the same ID in both the "E-mail" and "Confirm E-mail" field. Could you please confirm that?

  • Just installed the latest update and now I can't open e mail attachments on my iPad and I phone 5s

    just installed the latest update and now I can't open e mail attatchments on my I phone 5s and iPad 2

    Try re-installing the big 10.6.8 Combo...
    http://support.apple.com/kb/DL1399
    Repair Permissions afterwords, reboot.

  • I just installed Creative Suite 6 and want to know if I can uninstall versions 5 and 5.5

    I just installed Creative Suite 6 and want to know if I can uninstall versions 5 and 5.5

    Adobe upgrade installers are always full installers and do not need to find a previous version installed.  If they don't , they just prompt you for the old serial number as well as the new one.
    That being said, if you plan to uninstall older versions, the time to do so is BEFORE you install the newer version.  The problem is that when you run the uninstaller for each older version, they will in turn mess with the newer installation iof already present. There are just too many similarly named files in similar locations for each version.
    If you already have CS6 installed, running the CS5 and CS5.5 uninstaller will mess with your existing CS6 installation.
    At this point, you're better off uninstalling all three versions, running the Adobe CS Cleaner and then re-installing CS6 from scratch.
    I know, it sounds like a pain—and it is—but it will save you a lot of grief later on.

  • I have LavVIEW 8.6 full version installed. I tried to upgrade to 8.6 professional version by just installing the new disks, and it didn't upgrade. Do I have to un-install, or is there a trick ?

    I have LavVIEW 8.6 full version installed.  I tried to upgrade to 8.6 professional version by just installing the new disks, and it didn't perform the upgrade.  Do I have to un-install first and re-install, or is there a trick ?
    Solved!
    Go to Solution.

    Look into the License Manager in the National Instruments folder of your Start menu.  It is probably just a matter of activating LabVIEW 8.6 and possibly some other features with your new license code instead of your previous full version license code.

  • I just installed a new router and cannot get my ipad to connect now and I have no idea what settings should be or how to go about this

    I just installed a new router and cannot connect with my ipad now.  I have no idea what settings I shold be looking at or how to do this

    you likely need to setup your router using an eathernet cable and a computer to turn on the wifi part and set an encryption level and password or the likes
    if you havent do such things before you may require help from somebody who have
    the router likely comes with an instruction manual how you set it up the first time

Maybe you are looking for