Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????
just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????
Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.
Similar Messages
-
hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone
Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.
-
I have just bought a new mac book, and I want to start from scratch by syncing the content of my iPhone, but each time I try it wants to delete everything on the iPhone and replace by what's on the new iTunes library, i.e. nothing! can I do the reverse, i.e. importing all my iphone's stuff on the new computer?
You need to copy some files and your iTunes folder to the new computer. Do you have a backup of your old computer (or still have the old computer?) Was the old computer a Mac or PC?
MacWorld - Move an iTunes library from a Windows PC to a Mac
Back up your iTunes library by copying to an external hard drive
iTunes- How to move your music to a new computer -
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work -
How do I get my Ipad2 to recognize the airport express range extender
how can I get my IPad2 to recognize the airport express range extender?
Are you trying to scan "wirelessly"?
Adam -
I just made a new icloud account and i want to restore my phone but i dont want to lose my pictures. and i no longer have any photos on my photostream.
Photos/videos in the iPhone's camera roll can be imported by your computer as with any other digital camera.
http://support.apple.com/kb/ht4083
After restoring your iPhone with iTunes, you can transfer the photos and/or videos back to your iPhone via the iTunes sync/transfer process. This is selected under the photos tab for your iPhone sync preferences with iTunes.
Or you can create a backup for your iPhone with iTunes on your computer and when restoring your iPhone with iTunes, you can restore from the iPhones backup. Photos/videos in the iPhone's camera roll are included with the iPhone's backup. Although included with your iPhone's backup, I would still import the photos/videos from your iPhone's camera roll first. -
i just got a new macbook pro and did migration from my old computer. transferred everything except my iPhoto! now it prompts me to choose a library, but its all blank? help!
Copy the Library over manually.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?
Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ? -
i have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?
Formatting will erase the drive.
You need to copy the photo's to either your old computer, the Mac Mini or to a new external drive and then decide what to do with your existing external drive.
For example: You could use one External drive for Photo's and one external drive for Time Machine to backup both your Mac Mini and the Photo drive. -
I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account
do I need to create another account with a different email account
Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different. -
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
Flow would be
Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
thanks!Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.
-
I set up iCloud on my iMac with OS version 10.6.8 but I'm not able to have the iCloud icon show in my Dock with the other application icons. What can I do? Is it because iCloud is not part of the 10.6.8 version? I clicked System Preferences and I saw MobileMe and no iCloud.
Thanks for your reply! Would my IMac be able to support the Mavericks (10.9) considering that I bought it in June 2011? Not sure if that even matters.
-
my phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank
Thank you so much you really hepled, my phone is working again phew!!!
-
Have a pavilion g42 . I just installed a new hard drive. After installing the first CD the screen is just black. What next?
thats2odd wrote:
I have about 300 songs missing anyway to update the folder to add the missing songs?
If you know the location and you have all the songs in there, you could try the below:
For iTunes 9:
Choose File > Library > Organize Library
For iTunes 8:
Choose File > Library > Consolidate Library
For iTunes 7 or earlier:
Choose Advanced > Consolidate Library.
A message will pop up.
For iTunes 9:
Place a check next to "Consolidate files" and click OK.
For iTunes 8 and earlier:
Click Consolidate.
This action copies all of your music and other media files to the new location.
Maybe you are looking for
-
Can't sync music, videos, apps with homeshare?
We have a simple PC computer. My father has the IPhone 3g, I recently got the IPhone 4 for my birthday in august. Both my mom and my sister has the IPod touch (3rd and 4th generation i think). And whenever I try to put a new song or movie or a app fr
-
For the last couple of weeks, by iPhone 4S has been running warm no matter where I keep it. In addition, when I open an app, it may or may not open. When it does open, it quickly closes almost immediately. It is like trying to beat the clock to ty
-
Detuning is not equal to blocking and attenuation
Steve talked alot about holding the phone and blocking the signal, thus causing attenuation, and how it exists in other phones. fine. Why did he not talk about the OTHER issue, which is the detuning that results when human contact bridges WiFi antenn
-
HOW TO INSTALL ROUTING IN SOLARIS 10
I have already installed my Solaris 10 Server, I was tryin to implement the routing in the file /etc/init.d/inetsvc (/etc/rc2.d/S98inetsvc) as in Solaris 8. !! this file does not exists!! How install routings in Solaris 10 6/06 ?? thanks
-
Memory leak in Servlet Filter handling?
In Sun Web Server 6.1, I'm finding a memory leak when using servlet filters. I've even created a "no op" servlet filter. When it's registered, every 10000 hits or so to filtered static content will eat up about 5 to 10 MB of RAM. The JVM heap size do