Just installed firefox 3.6.12 on windows xp. Firefox cannot access the internet. Explorer works fine.
New install of firefox 3.6.12 on windows xp professional. Firefox can not access the internet. firefox starts but when you click on the get started button it comes back with a unable to fine mozilla.com error. Explorer works and I can ping mozilla.com
For me it seems to be related to the Shockwave Flash plugin (10.1 r85). Firefox seems to crash only when some flash pages have to be displayed and if I disable to the Flash player plugin Firefox don't crash anymore. This is not a solution just a diagnostic.
Regards,
Vivian De Smedt
Similar Messages
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada -
I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.
I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.
Try this:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html -
Microsoft XPS Document Writer locks up and PDF995.com (creates acrabat pdf file) stops printing after the second page from this site http://super.nova.org/DPR/CinematicApproach/. This was a Windows 7, 64 bit machine that had the issue. Microsoft Internet explorer works fine and printed the document with Internet Explorer.
The machine that displayed FireFox printing issues was a up to date Win 7, 64 bit, Quad Core, 8 Gig Ram. Don't really have a question just reporting a FireFox Bug.Hi,
do you have a solution for the problem? We have actually a similar problem with locked IE8 when using a zoom factor > 100% (it's a customer WD4A).
Regards,
Steffen Brauner
Edited by: Steffen Brauner on Jul 7, 2011 6:54 AM
I found the notes 1534606+1534610 that solved my prob.
Edited by: Steffen Brauner on Jul 7, 2011 6:55 AM -
I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX. BOX COMES UP AS FOLLOWS:-
I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX
A BOX COMES UP WITH THE FOLLOWING:-
firefox-exe - Entry Point Not Found The procedure Entry Point
could not be located in the dynamic link library mozsqlite-3-all.
PLUS
When I access the internet via my server (Tiscali now Talk-Talk)
I have to enlarge each page. this is not now automatic.
What on earth has happened?
Please Help.
Thank you.You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
NONE of the web pages load properly. If I hit "Ctrl + F5" it will fix THAT PAGE ONLY. I have to do this to EVERY SINGLE page I try to load. This ONLY happens with FIREFOX. Internet Explorer works fine. PLEASE HELP! Thanks.
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
Question
Since I downloaded Firefox 4, I can't see attachments in my Yahoo mail. This is not a problem of Yahoo, because with Internet Explorer works fine. What is the problem?Ok, now they are showing. I restarted my computer again and they are showing now.
-
I started up my computer and opened up firefox. A box popped up that said firefox was updating. After updating was complete, firefox attempted to connect to my homepage, yahoo, but the connection timed out. I tried connecting to other websites and they also timed out. My internet connection is good because internet explorer works fine.
Common cause after upgrading/updating is that your security software (firewall) may not recognize the new version and may be blocking Firefox and/or plugin-container. Remove all permissions for Firefox and plugin-container from your firewall's programs permissions list, then start Firefox and go to any website and let it detect and set internet access permissions.
*See [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
When I click on the icon for firefox, a little toolbar (the one you see in the top right corner of the screen) pops up and nothing else happens. I'll close it out and retry, with only the same results. I tried Firefox safemode, with the same result. Like there is something blocking me, but I don't know what. It doesn't matter if I've been on the computer for some time or just started up, I cannot access the web thru Firefox. This has only started in the last couple days. Previously, I've never had this problem. I haven't loaded any new programs anytime recently to account for this. I use Norton for my anti virus program which is the newest and had since end of December. I am not happy having to use the windows internet explorer, so would be very happy to get this resolved. Should I uninstall the mozilla program, and then reinstall it?
"I have an ethernet cable in port 1 on my computer. That is configured manually to access ther office network."
Do you have a "real" IP address or a private (192.168.x.x, 10.x.x.x, 172.x.x.x) IP address?
"The wireless router was connected to the company server only for the purpose of getting me online through Airport because I couldn't access it using an ethernet connection"
Could not access it because their network security blocked you by intent, or had some unknown technical difficulty?
Unless you are blocked by intent or ommission (if they have to explicitly allow your machine) I can think of no technical reason why your wired connection should not both get you on their network and on the internet in general. You should not need to be dual homed (though dual homing should work as well).
Please answer the questions above when you can - I think solving the wired LAN issue will be easier if you are not being intentionally blocked. -
Immediately after I downloaded the latest firefox security update my computer will no longer access the internet. I still have a fine wireless connection but Firefox, Internet Explorer, Itunes, and every other program will no longer access the internet, saying there is a connection error. I even tried restoring my system to a previous date but it said that a security program was preventing it from doing so.
What's the security program called? Is it '''Win 7 Security''' by any chance? There's a rogue AV app that will prevent internet access by that name. It comes in many different flavours, but it's basically the same product with different names depending on the operating system its aimed at. See screenshot.
Do you have another computer you can use to download Malwarebytes? Or can you get a friend to download it for you and copy it to a USB drive? Download from here: http://www.malwarebytes.org/products/malwarebytes_free
You can use the USB drive to transfer the program to your own PC and then install it. -
I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.
If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE; -
I recently installed Montain Lion on my 2009 iMac. Now when I try to access my iTunes library through my second generation Apple TV I receive the following message: "Could not connect to ...Library".
I have done the following to resolve the problem with no improvement:
(1) verified that my software is up to date on both the Apple TV and iMac (iTunes).
(2) Verified that home sharing for my entire iTunes Library is turned on in my iTunes preferences.
(3) Verified that the network is working - I only have one network, the signal strength shown on the Apple TV is 5 bars, and the Apple TV an access other internet programming (Vimeo, YourTube, etc.).
(4) Restarted both my Apple TV and my iMac.
Prior to my Mountain Lion upgrade the Apple TV worked fine and communicated with my iMac without a problem. I'm out of ideas and would appreciate any suggestions from the community. ThanksSince upgrading to Mountain Lion, I am having a similar issue on my iMac 27" (2011).
Once the computer goes to sleep, Apple TV is unable to wake it up (I do have the "Wake for network access" Energy Saver option turned on).
I have to specifically login and "wake up" the computer before my Apple TV can see it.
Overall, I find Mount Lion to be much more stable and smoother compared to Lion - but this issue is very annoying -
Uninstalled firefox 4.0 because I didn't like the upgrade, now I cannot access the internet.
I have a laptop, and internet explorer hasnt worked for a long time, so I've been using firefox. I upgraded today to 4.0 version, and instantly hated it. I uninstalled the program, which I now know was the wrong way to do it. Then it completely disappeared, and I couldnt access the internet. I then did a system restore back to yesterday, and it put the icon back on my screen, and shows the program in my files, but it wont open.
I am panicked since I NEED to be doing things on this laptop today. Right now I am using another computer, which is in the same house.
Also. when I go to firefox from this computer, it takes you to ask to download 4.0. this computer doesnt use firefox. so, i need help ASAP i beg of you, and also, once fixed, do I HAVE to use 4.0? or is there a way to use a previous version?Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Maybe you are looking for
-
Can no longer dounload pdf file in safari or firefox. What is the problem?
I am using os 10.7.3 and a couple of weeks ago I found I can no longer download pdf files. Instead nothing happens or it try so open in a document viewer, for example: http://wi-burnettcounty.civicplus.com/DocumentView.aspx?DID=341.What do I do? I ha
-
Where and how do i get a battery for my macbook
yes, i just asked a question about batteries but i did not address this issue. where do i get a battery when i need a new one, how much are they, and who puts them in. if apple needs to put it in how long does it take them. also when i keep my macboo
-
I need help in calculating the amount column. Please advise and thank you in advanced!
-
HT1338 How do I view on my TV photos which I have burned to a disc?
How do I view on my TV photos that I have burned to a disc?
-
My Mobil Me Gallery wont load into i-web
I have several albums that are published to mobil me. I want to add these albums to my iweb page. When I use the widget and drag it to a blank page in i-web, the little icon box says "no albums or movies". But there are albums that I published from i