Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

Just installed HP BIOS Update.  System no longer recognizes my printer (6110 all-in-one).  HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work. 

Hey thecityhouse,
When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list?  This may have to be performed to get the proper driver for your printer.
If this does not work, then I would take a look at the information in the post found here.  It may provide a workaround to the issue you are experiencing.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

    Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8? 

    Hi JCWG. To answer your question, Yes the driver is the same.  Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers.  http://goo.gl/njt723;
    If you have any other questions, please feel free to write back
    Thank you
    Waterboy71
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

    since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

    do you mean the printer? ive already tried that without success any further help apprecaited

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

    I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion 

    hi,
    check this link for Mac 10.7 installation guide.
    l0ri3
    ~Though I work with HP my posts and replies are my own and not from HP.~

  • All in One Printer no longer scanning (C5280)

    I have an oldish printer/scanner that was working fine until I downloaded the update that came from HP on Aug. 13th. Since then, I cannot scan. I got an error message that the machine was disconnected from the computer which made no sense since I can print from the computer just fine. I did all the things the error message suggested: rebooting, disconnecting the cable, redownloading the driver. The machine worked for about 5 pages of the scan after the redownload, then conked out again.
    I saw some directions about going into the registry editor window but they were for Windows 7 and below. I have Windows 8. I did not see a folder for Digital Imaging in the HKEY_LOCAL_MACHINE/Software/H-P
    If there are updated directions for Windows 8, pleae let me know.
    I have an All in One Printer (C5280)

    Hello @Toonces , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scan issues.  I would like to try and help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

    Hi All,
    I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

    I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

  • HP Photosmart C3180 All-in-One printer -- SCANNER not working.

    I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
    If I can get any help from others I'd appreciate it!

    HP provided this link to software which resolved my scanning issue.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

  • HP Deskjet Ink Advantage 2515 All in One Printer is not working

    Please help me to fix my HP Deskjet Ink Advantage 2515 All in One Printer. Before it is ok to use it, but after a couple of months when I dont have an ink I didnt use it. As of today I have an important papers to scan but when I try to plugged in the outlet my printer power is off but the two lights in fit to page are on and also the attention light is on. I use to plugging it again on and off from the cable wires but still the same case. I try to push the power on but it doesnt work. Please help me. Thanks in advance. :-(

    Hello Folks,
    Welcome to the HP Support Forums! I understand you are not able to print to your HP Deskjet Ink Advantage 2515, the power button is non responsive.
    I would like you to start troubleshooting here: The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
    Please let me know the outcome, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HT5682 April 22, just installed the latest update to fix the Java problem, it does not work.

    About a week ago I installed a MAC update. I discovered that I was unable to play POGO games. I know that is not up there with all other uses of MAC... let's get back on track here. I have uninstalled and reinstalled, and reset preferences at least 6 times to get JAVA back.
    Some of my new BFF sites:
    Java for OS X 2013-002: How to re-enable the Apple-provided Java SE 6 web plug-in and Web Start functionality.
    Why is Java not working on my Mac?|EA Help
    Re: Bridge - Page 2 - Answer HQ   Java POGO
    Java for OS X 2013-003    get applet from Oracle
    My Intel MAC  circa 2009, is  running MAC OS X Lion  10.7.5   Safari 6.0.4
    Today I received another update from Apple stating it would provide the answer to POGO 6 and you can select certain sites that can be accessed.  
    This also was a FAIL!
    I now know the steps, can access TERMINAL without shaking, have learned to use GO to access UTILITIES.  I still end up with JAVA not recognizing that their software has a place in my heart and I truly hope on my computer soon.
    I have been playing a horrible game of Solitaire on another site.
    Are there others out there with this problem or is it just me? Can anyone suggest anything else?

    Thank you BDAua. This is what I typed and the reply from Terminal
    java -version
    java version "1.6.0_45"
    Java(TM) SE Runtime Environment (build 1.6.0_45-b06-451-11M4406)
    Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01-451, mixed mode)
    BTW - this application does NOT show up in the Applications folder and I consider that a bit odd.
    I also  tried typing Java for my computer to search for and this is what I got under
    Overview:
    PID: 944
    Host: localhost
    Main class: <unknown>
    Arguments: <none>
    JVM: Java HotSpot(TM) 64-Bit Server VM (20.45-b01-451, mixed mode)
    Java: version 1.6.0_45, vendor Apple Inc.
    Java Home: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
    JVM Flags: <none>
    Heap dump on OOME: enabled
    I hope something is helpful within all of this info!

  • Hp officejet 6110 all in one printer wont work!!!! i need help!!!!!!!!

    i turn on my printer and it says that i need to remove and check my cartridges. i did that a million times and it still says that same message. i dont know what else to do. any suggestions??? also, i dont know where to get a connection for my labtop to connect to my printer. where can i get it???

    Hi,
    There is not a scan driver for the 6100 for 10.6/10.7. The product was released in 2004, and reached end of life in 2008 (a year before 10.6 was released). Chances are that a driver will not be written for this product.
    I don't have a 6110 here that I can test with, so all I can offer are steps that I would try given the opportunity.
    One thing I noticed from your response on trying the 6210 driver was that the product (in the queue) was still showing as the 6110. I am curious as to how you went about installing using the 6210 driver. I can only think of two scenarios off the top of my head:
    1) You had the 6110 installed, went to options and supplies, to the driver tab, and specified the new driver.
    2) You had no products installed, and when you went to add, you specified the 6210 driver in the Print Using box prior to clicking add.
    The option that is more likely to provide the scan option is option 2, so if you haven't tried it, I would encourage you to do so. If that doesn't work, try other Officejet All in one drivers, or consider upgrading if none of the above will get it to work.
    I understand that the lack of a full feature driver is frustrating, but most (if not all) companies have dates in place to cut off development/support for their products. A similar scenario is the Netgear FA311 Network Interface Card. I remember using one of these cards back in 2000/2001, but if I wanted a windows vista 64-bit driver i'd be out of luck. I'd likely end up using a realtek driver (per a forum post suggestion) and see if it would work, and hope for the best.
    Best of luck, I hope option 2 (if not already attempted) gets it working for you.

  • Officejet 6110 all-in-one printer

    Printer makes continuous clicking sound.  Seems to come from right hand side.  Turning off, unplugging, disconnecting everything doesn't help.  Ink cartridge moves freely and appears normal.  Everything that can be easily reached seems to be normal.   Cannot print, scan, etc.
    suggestions?

    To install the duplexer you need to remove the rear  blankpanel from your OJ 6110.  The back panel will be about 9" wide and 4" high with two tab s that can be moved together to release the panel.  Once it is removed snap the duplexer in place.  Make sure it is oriented correctly, the label should be on the bottom.  Use the large buttons on the ends of the duplexer to release the duplexer if it needs to be removed or repositioned.  
    With the duplexer installed you will need to configure it to be recognized by the driver.  See the post here for information on enabling the duplexer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I install my Kodak ESP C315 1827 All in one printer no CD drive on my MacBook Air

    Does anybody know how to install Kodak ESP C315+1827 to MacBook Air.  I have no CD drive and have tried sharing option, there is no Kodak APP in the App Store to download.

    The following has the download and instructions: http://support.en.kodak.com/app/answers/detail/a_id/32109/kw/esp%20c315/selected /true

  • HP 6110 All-in-One Printing from Vista question

    I have recently started using Vista with my printer at home. Whenever I try to print certain webstites that are running programs on ( like one of my work websites) it will print out the HTML code and not what is on the screen. For instance I am looking at my screen and there is one page I would like to print but on print preview and when it prints it will come out with about 20 pages of HTML code. I tried select and print but that doesn't work either. I can print PDF files, word and excel and everything else. Is there something I can change in the settings ? I have tried everything ????
    Message Edited by Dickice04 on 04-02-2009 01:34 PM
    Message Edited by Dickice04 on 04-02-2009 01:35 PM

    A simple search on the HP website will give you THIS document that should resolve the issue.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • HP Envy 120 All in One Printer no longer recognises MacBook Air

    Since upgrading to Yosemite, my HP Envy 120 no longer recognises my Macbook Air and vice versa via the router, having worked previously (not perfectly all the time admittedly but connection wasn't an issue). I can connect Macbook to printer via HP direct, but this means disconnecting from the internet, scanning, then re-connecting to internet which is a bit of a faff and seems a backwards move. 
    I have downloaded the latest HP printer driver software, followed all suggestions I can find on this such as deleting the printer on the Macbook under system preferences, but when I try to add it back on, nothing shows. I've tried adding the IP address manually, this comes up with an error message. I've done the wireless wizard on the printer and that was successful so it is connected to the router but is not detecting my computer, which is also connected to the same router.
    The printer is still under warranty - I meant to take it back when I had earlier problems but decided to stick with it a bit longer. I'm just trying to work out - is it a HP problem or is it an Apple problem - ie can I return the printer under the warranty?
    Or does anyone have any simple fixes? I'm not at all computer literate!
    Many thanks!
    This question was solved.
    View Solution.

    Hi,
    As you mention that you do able to use the printer with no issues by using HP Wireless Direct, that means that this is neither HP or Apple issue but a network connectivity issue.
    Apple devices uses Bonjour to communicate with the printer, that relies on IP Muticasting which need to be supported by your router.
    If I clearly understood your description and the device do work as expected using HP Wireless Direct, the router is the cause for this issue as you do not see similar issues while removing the oruter from that acquisition... please also let me know if i have misunderstood your intention about the issue.
    Additionally, have you tried rebooting your router by unplugging its power for 10-20 seconds? once it starts up reboot both the printer and then Mac and check for any difference..
    Please try that and check if that help. if the issue persists do let me know your router brand and model, its settings or capabilities may cause a such and may prevet this kind of connectivity.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for