Just installed latest Itunes, and system now grinds to a halt, caused by apsdaemon.exe and apple mobile using 99% processing. Have stopped these processes, but each time I start Itunes I have to do it all over again, any help would be appreciated
Having just installed the latest iTunes update, I find my system grinds to a complete standstill. I've checked and found two apple processes, apsdaemon.exe and applemobiledeviceservice.exe use 90% plus of my processor, so have stopped these. However, each time I start iTunes the same situation occurs. Is there anyway I can remove these exes from my system or is apple aware of this stupid update and what are they doing about it. Any guidance would be very much appreciated
What version of itunes were you using before you updates?
Have you checked other related post?
iTtune will require applemobiledeviceservices.exe and others to run. What you are experencing is usually caused by a conflict with other software on you system. Everybodys system is set up differently, so there is not a "one fix all". Most commonly associated with Firefox addons, video accelerator software, podcasts on the backup, anivirus software, parential control software, take you pick!
I found my fix here.
https://support.apple.com/kb/TS4123
Similar Messages
-
I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.
I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck. -
I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.
Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?
-
I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.
Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/ -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
I have OS 10.5.8 and am unable to run ITunes or IPhoto. I can reinstall I tunes, but it says I need the newest version of QuickTime, which I already have. Any help would be appreciated!
Hello Esther,
Do you have QT v7.7?
http://support.apple.com/kb/DL761
And iTunes v10.6.1?
http://support.apple.com/kb/DL1426 -
Hi
I'm using a 3GS (4.3.3) and itunes 10 2.2.12
When trying to sync my music my phone begins the syncing process, back up and preparing etc. Once it begins actually syncing it seems to get stuck on song 2 of 1500. After about 5-10mins a message appears saying song 2 of 1500 can not be copied because it can not be copied or read. Thats it. It doesn't try to sync the rest it just stops. The music is definitely available and it seems to have no problems syncing any podcasts. Any help would be appreciated. ThanksRemove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected. -
Problems installing OS
I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive. When I choose the installation disk the Apple logo comes up and it stops there. Then the mouse and keyboard goes dead. I'm trying to install 10.6. Any help would be appreciated. ThanksSince you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?
-
I am upgrading from iPhone 3 to 5. I have backed up my 3 on iTunes. I keep getting an error when I try to download all info to the 5. The error says I have disconnect my phone but I haven't. Happened multiple times. Any help would be appreciated.
Are you running iTunes 11.0.1 (current version)? If not, get it at http://www.apple.com/itunes
-
Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.
Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao. -
I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.
Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling -
I recently downloaded the latest version of Adobe Reader for my MacBook Air and now when I try to open a new pdf I get the Adobe logo and text in Japanese and nothing else. The pdf doesn't open. Any suggestions? I never had this problem until my cache was cleared and I had to re-install Adobe Reader. Any help would be appreciated.
Just to say I am having exactly the same issue on my MacBook Air. I can't remember what I did but after this happened a few times, and once I had clicked on the Japanese pop up, I managed to do something that now means I get the pop up in English, saying 'Adobe Reader blocked for this website'. When I click on it it asks me to trust the content and then I get a bar with the text in Japanese. Eventually the pdf does open. However it's very irritating that I have to trust every pdf individually which I never had to do before the latest upgrade, and I don't understand why I get messages in Japanese. I will be interested to see whatever answers other more technical people may provide!
-
For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening? I keep having to delete my library!
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy
That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally. -
Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.
HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.
Maybe you are looking for
-
How to copy line items from one expense report to the next
I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry. Is ther
-
Is there a way to create reusable HTML Forms that can be used on multiple pages?
I'm trying to understand the recommended approach to managing 10 HTML forms that will be reused on many different pages. I want to be able to modify the form definition once and have the change propogate.
-
I have checked for downloads on the Apple TV but do not see anywhere where I can re down load purchased items. When I asked the iPad to play on the Apple TV it didn't work (it found it and said it was playing, but it wasn't on the screen)
-
Hello, I am having difficulty adding a device and tranferring music files to a new iPhone 5s. I have an Apple ID which has 3 devices associated with it: a PC laptop, an iPod Touch, and an iPhone 5. The laptop has about 3,000 CDs saved to it and has
-
Hi, I am new to this forum and am learning SAP BI 7. Can anyone tell me about the real time BUGS in SAP BI 7 and the solutions to them. I will be glad to award points. Regards, Suman