Just installed OS X Snow Leopard, and now Photobooth says I can't use the old version (2.0.3). How do I get the new version?
I just downloaded OS X Snow Leopard onto my early 2008 Macbook. I would like to be able to use Photobooth but it says I can not use this (2.0.3) version. How am I able to get an updated version??
For now just reinstall the combo updater. If this does not install Photobooth, then you will have to reinstall Snow Leopard or:
How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in
the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go
to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6. Click “close”. Go to step 7.
Extract or Install........
7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9. In the next dialog, click “Extract”.
10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11. Type in your password, click “OK”
Pacifist will begin to extract files.
12. In steps 8/10ß.... you also have the choice to “cancel”
Notes: Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
• Stop
• Leave original alone
• Update .....
• Default selection
• Replace .... (Replace option should only be used on full install packages)
Similar Messages
-
I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas
Your profile says OS 10.5.8, Snow Leopard is 10.6.
After installing Snow Leopard, did you do a software update? Apple menu / Software update ..
If you have not run it yet, do so. It will give you the highest versions of Snow Leopard and Safari. That might help. -
I purchased NIK's SnapSeed through the Apple APP store on Snow Leopard. Now that I am upgrading to LION the LION APP store does not seem to want to let me download this APP I have already purchased. What can I do?
Make sure purcahses are not, "hidden" ...
Mac App Store: Hiding and unhiding purchases
Try this this way ...
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase. -
I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?
aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply. -
PC crashed. iTunes was on it and now all files are gone. All music both purchased and copied from CDs is on iPad. How do I get the music back onto the PC without using the cloud. Afraid if sync will wipe all music from iPad.
You would need to download iTunes on comp and download purchases again (you don't have to pay again) and upload your CDs again IF you sync your iPad to your computer it will erase everything
-
I just upgraded macbook to SnowLeopard 10.6.3 and now itunes won't recognize my iphone. I tried turning everything off and restarting. I have the latest version of itunes. If I have to reset the phone (and ipod touch), what does that mean? Will I lose anything? How long will it take? thanks
Start iTunes. Make sure you really are running the version you think you are. Sometimes people end up with two copies, different versions.
Mac OS X v10.6: iOS device not recognized in iTunes after restart - http://support.apple.com/kb/TS3540
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.
You say you are running Snow Leopard 10.6.3. That version will not run the latest iTunes which requires 10.6.8 If you need iTunes 10.7 you have to be running 10.6.8
Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399
Message was edited by: Limnos -
I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?
http://support.apple.com/kb/TS1591
You may have to remove & reinstall the AMDS, as described in that support article. -
I just installed OS X Snow Leopard. I am now getting a prompt that the Flash Player (Safari Internet Plug-In) has failed. How do I correct this?
Go to Adobe's site and download the current Flash plug-in: Adobe Flash Player 11.6.602.155
-
I just downloaded the latest version of Snow Leopard and now my iWeb won't open.
I just downloaded the latest version of Snow Leopard and now my iWeb won't open. Does anyone know how to fix it?
If wish an answer, additional information would be helpful.
Allan -
I installed snow leopard and now videos on my Xfinity home page won't play
I installed snow leopard and now videos on my Xfinity home page won't play
You may be in the same boat as me.
I deliberately bought a refurb Feb 2011 MacBook Pro, because it would have originally shipped with Snow Leopard. I have to run an application for my job, which does not run under Lion.
Unfortunately, Apple is now upgrading all Snow Leopard machines, before selling them as refurbs. I purchased a legal copy of Snow Leopard, and have tried various downgrade solutions that I found posted on the net, without success. No matter what I do, it always goes into "three beep mode" after trying to install Snow Leopard.
The latest development came this evening, while I was talking to the "geniuses" at Apple. Apparently, there is now a firmware revision that loads the first time you run Software Update under Lion, and it locks the machine so that it can't revert to Snow Leopard.
The only option they have been able to offer me so far, is to return the machine and get a refund. This is maddening, as I HAVE to have a Snow Leopard machine, and can't find any other way to purchase one. -
I've installed snow leopard and now my MX860 won't scan
I've recently installed snow leopard and now my Canon MX860 won't scan. I've reinstalled the scan driver from the Canon website. Any other ideas?
I suggest that you open Print & Fax, select the MX860 under the scanner heading and remove it using the minus button. Then, still in Print & Fax, click the plus button to add the scanner again. The Add Printer browser will appear and with the Default icon selected the MX860 should appear as a printer and a scanner. Select the scanner entry and ensure the Print Using menu changes to Canon MX860 series. Click Add to complete the creation of the new scanner queue. Now test the new scanner by selecting it in the Print & Fax > Scanners list and then pressing Open Scanner.
-
Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound! Can anyone help?
In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded. You should do this when you progress via 10.6.6 to 10.6.8 too. -
I did a clean install of Snow Leopard and now when I reloaded iWork 09 from my timemachine it will not open anything. any ideas.
iWork '09 is still available from the likes of Amazon.
Your experience is why I never trusted downloaded versions when there's a physical DVD available.
It may be possible to reactivate with your code, but I can't advise you as to how. -
I just purchased and downloaded snow leopard and now I cant access my parallels 3.0 application. What do I do now so I can get back into my windows
I just purchased and downloaded snow leopard
Uh…no, you didn't. Snow Leopard is not available as a download, and never has been. So that means you're running Lion, in which case Parallels 3 definitely won't be compatible with it. You need to check what you're really running and use that information to post in the correct forum, as well as provide the necessary information about it. -
Updated to snow leopard and now get blue screen
Hi there,
I recently updated to snow leopard and now I get blue screen on start-up.
I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login.
I tried using disk utility from the install disc and it said HD appears to be ok. But it hasn't solved the problem.
Any help would be greatly appreciated
ThanksSee if you can find a solution here:
http://support.apple.com/kb/PH7212
Ciao.
Maybe you are looking for
-
How to show the data in table format when user click the Graph
Hi, I have a graph in my report. If user click the graph is there a way to show the data behind it? Thanks. Regards, Jun
-
Retrieving documents using native applications
Dear While retrieving content from content server, the content is usually launched as a web page or pdf files -regardless of the original native file- Can ECM automatically launch the native application to enable viewing of any retrieved document? If
-
How much does the voice X1 remote cost and does it ad fees to your bill
I have the X1 system. If I go into the comcast office to get one of the X1 voice remote is there a cost? And more importantly does it add fees to a person's bill?
-
Hi, I am using a combo box that is populated with arabic data, the problem I am facing is that the text in the combo box is being shown from left to right while arabic language is from right to left. I used TLF for text editor and it's working great,
-
Hi, Please let me to know how to run the pending V3 jobs. Scenario : Inventory controlling extraction Regards Santhosh kumar N