Just installed the latest iTunes software update and the extra images i had for my albums on iTunes have disappeared...Help?
Just installed the latest iTunes software update (iOS 5.0.1) on my MacBook Pro, and the extra images i had placed on my album covers in the selected item box have disappeared, leaving just one image per track. Any ideas on how to restore would be most appreciated...
Installing an iTunes update does not remove your media or personal files.
Are the files actually missing off the computer, if so, you have a serious computer issue... not a software update issue.
Regardless, use the backup of your media and other important files to put everything back. You do have a backup, correct?
Similar Messages
-
I have optimise my system and have 16GB of ram and am only running lightroom, any ideas? I have re installed the program
An Apple Tech have helped me by mail and solve my issue. Below, the copy of the mail :
Can you try resetting the SMC on your Mac ? Please follow the instructions here:
http://support.apple.com/kb/ht3964
I have also pasted the instructions below for your convenience:
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosingSleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications.
Resetting the System Management Controller (SMC)
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
In case this does NOT work, then try this:
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer. -
I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.
Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!
-
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference? -
iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
cannot install itunes 7 because os 10.6.8 is needed. I select software update and the 10.6.8 is not available to be downloaded. I'm trying to load itunes to the iphone5
If you're using a PowerPC Mac, you can't.
If you're using an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
If you don't know, choose About this Mac from the Apple menu.
(70291) -
I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
Have installed the latest Airport software update. Still no wireless
I was hoping that Apple would fix the can not connect to wireless problem, I installed the latest airport software update but still have the same problem. 10.4 works great but 10.5 will not connect.
Mine is a long and sad story. I have ComCast cable connected from their modem to an Asanti 4 port router. Connections around our little office area are by ethernet. I then have one router port connected to an Apple snow airport. Out of the office area we use the wireless LAN. All of our PC laptops, our PC desk top and our MacBook Pro (running 10.4) will connect through the snow airport LAN when need-be. All of the aforementioned computers will connect to our city-wide free wireless network, Metro-fi Free. Everything works perfectly except my FW800 running 10.5. For now nothing is incripted. If I turn on my airport card I can see available 6 neighborhood wireless LANs, Metro-fi and the snow base station. I installed 10.4 in a separate HD and booted up. It connects perfectly which means my computer and airport card must be OK. The problem is in 10.5 for sure. I tried to check the update you are supposed to see when opening the airport utility but of course the utility says it can find no AirPort base station. I have reinstalled 10.5, run Diskwarrior and TechTool Pro and found no problems. If I did not have such a bunch of stuff in my system HD I would go back to 10.4. What have I overlooked??
Bob -
and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(
The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ -
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
Hi, upgraded to Mavericks and Epson scanner software was quarantined. Powered on the scanner, plugged in the USB, clicked Software Update, and an Epson Printer Software Update appeared in the App Store Updatees area. Clicked Update for the Epson printer software. During the download, I was presented with a dialog asking me if I wanted the software to be automatically installed. I chose the "not now" option and as far as the App Store in concerned the software was installed, but it has not been. Where did this go to and how can I force it to install? Or is there some way to force the App Store to go through the download process again. Many thanks! Joseph
Solution:https://discussions.apple.com/message/23504811#23504811
Epson install: http://www.epson.com/cgi-bin/Store/support/SupportMavericksDetails.jsp?BV_UseBVC ookie=yes&oid=139863#stage1
Epson Image Capture instructions: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 237343&foid=244523&infoType=FAQ -
so my phone is plugged into the computer for a software update and the update went halfway through and kind of stopped. it says its still updating but I cant figure out how to stop it and just get my phone back. how do i get my phone back without losing anything?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video. -
Since most recent OS update, my iMac intel won't open my HP Officejet 4500 scanner. I have un-installed and re-installed the 10.8.3 update and the dame with HP drivers. I get the essage (HP scanner won't open because of a problem". The printer works, but not the scanner. Suggestions???
It's possible that you need new drivers from HP, in order to be compatible with OS X 10.8.3. Looking at HP website, they haven't released new drivers since last November. You might need to wait for new drivers or contact HP to push for an update.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919448#N218 -
When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!
Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.
Maybe you are looking for
-
Calling all BizTalk users! May TechNet Gurus announced!
The results for May's TechNet Guru competition have been posted! http://blogs.technet.com/b/wikininjas/archive/2014/01/16/technet-guru-awards-december-2013.aspx Congratulations to all our new Gurus for May! We will be interviewing some of the winners
-
Pages - How to get current date when opening a template!
I have a stationery template with the date on itl When the template opens can I get it to display the current date.. It so how is that done.
-
Custom tag - setProperties() not called
Hi all, I've created my first custom tag with it's own component class, Tag Class, Renderer and TLD. However, when the JSP first loads, the encode() method fails in trying to get the attribute values from the attribute Map - the Map is empty. Upon fu
-
How to save your website without..
I was wondering how to save your data to be always available, without using Muse. I mean after the trail period or month subscription ends, that you still can open or upload it without Muse. Like that you have an backup.
-
I have the 3.6 tarball, how do I install it in MEPIS
I do not know how to install the tarball!! How do I do it! NOTE - I just submitted this question (this is the second attempt), when asked to confirm the question by email, it was not found, therefore I am resubmitting.