Just installed Windows 7 64bit and I'm experiencing significantly high temperatures. How can I lower the temperatues? What is the best fan program i can use? Will my computer be damaged if I keep it going like this?

CPUID HWMonitor Report
Binaries
HWMonitor version          1.2.2.0
Monitoring
Mainboard Model                    Mac-C3EC7CD22292981F (0x000004E3 - 0x7EC7B2EE)
LPCIO
Hardware Monitors
Hardware monitor          Apple SMC
          Temperature 1          36°C (96°F) [0x24] (Mainboard)
          Temperature 3          56°C (132°F) [0x38] (CPU)
          Temperature 5          58°C (136°F) [0x3A] (GPU)
          Temperature 8          50°C (122°F) [0x32] (Heatsink #1)
          Temperature 10          33°C (91°F) [0x21] (Slot #0)
          Fan 0                    2162 RPM [0x872] (Left side )
          Fan 1                    2001 RPM [0x7D1] (Right side )
Register space                    class = 0x14
Hardware monitor          Battery
          Voltage 0          11.06 Volts [0x2B33] (Current Voltage)
          Capacity 0          84600 mWh [0x14A78] (Designed Capacity)
          Capacity 1          82400 mWh [0x141E0] (Full Charge Capacity)
          Capacity 2          38900 mWh [0x97F4] (Current Capacity)
          Level 0                    3 pc [0x61] (Wear Level)
          Level 1                    47 pc [0x2F] (Charge Level)
Hardware monitor          NVIDIA NVAPI
          Voltage 0          0.81 Volts [0x32C] (VIN0)
          Temperature 0          58°C (136°F) [0x3A] (TMPIN0)

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Similar Messages

I have a Compaq CQ 70 and have just installed Windows 7 and my inbuilt microphone has disappeared?

Does anyone know how to reinstall it as I need it to use on Skype. Thank you.
This question was solved.
View Solution.

You're very welcome.
Windows 7 is a great operating system, and normally the drivers it installs are fine. But the generic drivers that are loaded don't always cover everything, such as what you experienced with your mike not working, but the speakers did.
I once had a similar issue...I installed Windows 7 on a HP dc7600, and the audio worked fine out of my plugged in speakers, but it did not work out of the built in PC speaker. I was at a loss to figure out why. I knew the speaker had worked in XP, so I knew it wasn't broken.
On a hunch, I went to the Realtek website and downloaded the newest audio drivers for Windows 7, and voila, my internal PC speaker worked fine.
Enjoy!
Paul

I Loose my windos xp. Installed windows 7 and get old data. Where (or how) can I get the old Firefox profile where I have my bookmarks? Thanks

I loose my windows xp. Install a new Hard drive with windows 7 and a new Firefox. I have acess to old HD data. Where can I get the Firefox profile with old bookmarks?

See the following article: [[Back up and restore information in Firefox profiles|Back up and restore information in Firefox profiles]]

I just installed windows 7 and i get a hp quick launch compatibility issue warning? what can i do?

Does this issue about my computer or printer?

Okay, try installing the HP QLB software. Then reboot your computer and see if the error goes away: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78740-1&cc=us&dlc=en&lc=en&...

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

I just installed windows 8.1 and it wouldn't work

What do I need to do to get iTunes to work again. Since I just installed Windows 8.1. This is stressing me out try to get it work. HELP!!!

That's awesome wonder!
Hey, I haven't experienced any problems with flash player square yet. Is it to "experimental" for the official repos? I've tested many flash sites and have yet to crash the browser. I think most users will not mind it in the official repos.

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Just installed windows 7 on my macbook (os x snow leopard) using bootcamp. I can't get back to my mac now. I've tried logging off of windows and shutting it down. when i restart it comes back on in windows. How do I get back to my os x?

Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp. Windows 7 works great, but I can't get back to my Snow Leopard. When I log off or shut down Windows and try to start up again, all I get is Windows. How do I get back to my mac operating system?

If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

I just installed itunes 10 and all it does when i open it is show me the software agreement, and if I click "accept" or "decline" it closes and does nothing else. It does the same thing when i try to play music on it. (By the way, I have Windows XP SP3.)

I just installed iTunes 10 and all it does when I open it up is show me the software license agreement, and if I click either "accept" or "decline" it closes up and does nothing else. It does the same thing when I try to play mp3 files, just opens up the license agreement and nothing else. It also doesn't recognise my iPod touch when I plug it in, thinks it's a digital camera. Please help! (By the way, I have Windows XP SP3.)

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Just installed Lightroom 3 and got this message: Lightroom – opening catalog: IMG_6343.JPG.lrcat

Hey guys, i just installed Lightroom 3 and when i tried to open it it gave me this message:
Lightroom – opening catalog: IMG_6343.JPG.lrcat
I have tried uninstalling and deleting it completely and it won't go past that error message! help!

Once you follow 99jon's instructions, you should be able to get into Lightroom, however ...
Did you try to open IMG_6343.JPG into Lightroom by using your operating system? If so, don't do that any more. Use File->Import... to get files into Lightroom, not operating system commands.

I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?

I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?

http://support.apple.com/kb/TS1591
You may have to remove & reinstall the AMDS, as described in that support article.

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Just installed Windows 7 64bit and I'm experiencing significantly high temperatures. How can I lower the temperatues? What is the best fan program i can use? Will my computer be damaged if I keep it going like this?

Similar Messages

Maybe you are looking for