Just installed windows xp

I have just installed windows xp using boot camp and i cannot figure out how to get back to the mac os. several things i read on here said there should be a bootcamp button and there is not. what have i done wrong?

You have to insert your Mac OS DVD while in Windows and run Apple Setup.
http://www.apple.com/support/bootcamp/ - and read the pdf guide

Similar Messages

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • Just installed windows 7 on my macbook (os x snow leopard) using bootcamp.  I can't get back to my mac now.  I've tried logging off of windows and shutting it down.  when i restart it comes back on in windows.  How do I get back to my os x?

    Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp.  Windows 7 works great, but I can't get back to my Snow Leopard.  When I log off or shut down Windows and try to start up again, all I get is Windows.  How do I get back to my mac operating system?

    If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
    If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

  • I just installed windows 8.1 and it wouldn't work

    What do I need to do to get iTunes to work again. Since I just installed Windows 8.1. This is stressing me out try to get it work. HELP!!!

    That's awesome wonder!
    Hey, I haven't experienced any problems with flash player square yet. Is it to "experimental" for the official repos? I've tested many flash sites and have yet to crash the browser. I think most users will not mind it in the official repos.

  • Just installed windows 8.1. when I try to access contacts in outlook get "the set of folders cannot be opened."  Did not have problem in 8.0

    I just installed windows 8.1 on my pc.  When I try to access iclod contacts in outlook I get a message " the set of folders cannot opened". What to do?

    Hi,
    Please create a new Outlook profile to check whether the issue persists:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

    Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
    Do anybody out there has an ideal of what to do to solve this issue.
    Thanks
    Pierre317

    Hi Pierre,
    more tips can be found here ...

  • I just installed windows 7 using bootcamp.  My sound is not working.  any tips?

    so, As my title says, I just installed windows 7 using boot camp.  However, My sound is not working.  at all.  This is a problem as most of what I do involves sound.
    any tips to help me out?

    you, or we,still need to install audio driver, likely Cirrus,
    "macbook pro windows cirrus audio driver"

  • Just installed windows 7, but doesn't take my password?

    just installed windows 7 using bootcamp, but now trying to log into windows, it wont take my password which i know is right.
    anyone else run into this problem? it wont let me reset the password either

    Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp

  • Can I just install windows 7

    I have a new lenovo laptop installed with windows 8 (I don't have the model number), sold in the US. I have a completely  legitimate windows 7 disc (sold in the UK).  Can I just install windows 7, assuming I don't care about windows 8 (I have no interest in dual booting, and have no data on the laptop)?
    Speculation about legal issues not required.

     Yes, just turn off secureboot in the BIOS. Windows 7 will not boot on a new windows 8 machine that has secureboot on.
    nothing legal to speculate on, as you bought a retail DVD.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • Just installed windows using bootcamp..... Explorer works but safari doesnt

    Like it says i just installed windows using bootcamp. I booted into mac and airport is connected to my wireless signal but when i open safari it says im not connected.. i ran diagnostics but it said it could fix the problem and to contact my provider... however i decided to check and boot into windows and lo and behold i have a fast active internet connection through the wireless signal... what the heck is going on ?

    also the mac wireless has worked on every other wireless network ( my school , my home) but it wont work at my office even thought the windows side will connect wirelessly... what gives?

  • Can;t access Touchpad Settings - Just installed Windows 10 Pro

    I just installed Windows 10 Pro and can't access my touchpad settings to get the scolling feature back.  A short while ago, when I connected my basic Microsoft mouse, the system did install a new driver for the mouse - could this be the problem? Or is it Windows 10?  Thanks for any help you can give. Toshiba Laptop Satellite C55-B
    Windows 10 ProTouchpad Driver : 19.0.16.3 7/21/2015 SynapticsMouse Driver: Microsoft 9.5.172.0

    I had the same problem. The settings would crash. The synaptics driver update fixed that for me. However after adjusting some settings a new problem emerged. Three Finger Gestures have changed from the default Windows 10 ones to the old Synaptics gestures. There doesn't seem to be a way to change it back. I think the Synaptics driver needs another update.

  • Just installed Windows 7 64 bit on a PC Encore will not come up

    I have a Dell computer quad core with Vista home premium 32 bit.   I have been running Premiere Pro and Encore successfully and have made some great videos.
    I recently installed Windows 7 64 bit. Premiere Pro runs fine but Encore will not come up. When the program gets to initialize transcoding it freezes and when I take a look at what is happening I see Encore is not responding. I have a hard time trying to end the program. I have run it as administrator and  have started Windows with no start up programs.   Any suggestions would be appreciated. Thanks in advance
    Will Moore  

    See if this helps
    Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Other than that, do a forum search for variations like...
    Windows 7 64bit
    or
    win7 64bit
    or just
    64bit
    MANY previous discussions of problems
    Also...
    Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
    Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
    Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
    Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm

  • I just installed Windows 8, but iTunes is nowhere to be found when I plug in my iPhone. What do you advise?

    How do I get iTunes to open in recently-installed Windows 8? Thanks

    Howdy BooDiggly,
    Thank you for using Apple Support Communities!
    It sounds like you freshly installed Windows 8, and now need to load the iTunes software. You can download it from this website.
    http://www.apple.com/itunes/download/
    When its downloaded, install the file, and you should be good to go.
    All the very best,
    Sterling

  • I have a Compaq CQ 70 and have just installed Windows 7 and my inbuilt microphone has disappeared?

    Does anyone know how to reinstall it as I need it to use on Skype. Thank you.
    This question was solved.
    View Solution.

    You're very welcome.
    Windows 7 is a great operating system, and normally the drivers it installs are fine. But the generic drivers that are loaded don't always cover everything, such as what you experienced with your mike not working, but the speakers did.
    I once had a similar issue...I installed Windows 7 on a HP dc7600, and the audio worked fine out of my plugged in speakers, but it did not work out of the built in PC speaker. I was at a loss to figure out why. I knew the speaker had worked in XP, so I knew it wasn't broken.
    On a hunch, I went to the Realtek website and downloaded the newest audio drivers for Windows 7, and voila, my internal PC speaker worked fine.
    Enjoy!
    Paul

  • I have an early 2011 macbook air 13..just installed windows 7 64 bit and my trackpad does not works and also my backlit keyboard does not function.tried almost everything. No help

    I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
    I did try all possible help i could found on internet. But no go.

    Hi Thank you,     the apple  mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    I tried this one but it did not work.
    iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

Maybe you are looking for

  • Proforma Invoice with reference to schedule Line

    Dear Experts, Whenever we create proforma invoice related to sales order, the system will copy every thing from sales order and same thing will be reflecting in proforma Invoice. If I want to create a proforma Invoice only for partial, can I do it. 

  • My HP Envy 120 wireless printer will not print from my ipad.

    My Envy 120 series (E39A3C) will no longer print from my ipad. The day I installed it, it did print, but since then will not. As far as I know I have not changed any thing. It prints perfectly well from my PC and laptop. I have taken all the advice (

  • Itunes 12 album art no longer able to paste it in

    Apple please return to copy and paste album art in iTunes.  This searching for a file to import in is really annoying.

  • Problem in putting validation for detail records

    Hi, I have a customer entity/ view object, and also an address entity/ view object. They are linked by an association/ view link. I need to put a chk that a customer should have at least one address. For this i created a validateCustomer method valid

  • 30EA4 - Yet another error log

    In the console window of the current session I have this: $ ./sqldeveloper.sh -verbose Oracle SQL Developer Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved. Reading configuration from: /home/alex/Download/sqldeveloper/sqld