Just loaded windows 7 on a macbook pro - how do you dual boot OS X and windows 7

Hi successfully loaded windows 7 and partitioned drive (I need windows for work Microsoft crm system)
All ok but a pain to have to keep logging off and on between OS X & Windows
I understand that there is a way to dual boot - I am running Snow Leopard on a macbook pro lap top OS x 10.6.7
Can anyone help please
Ian

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

Similar Messages

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Just got new macbook pro, how do you hook up 2nd monitor?

Just got new MacBook Pro, How do you adapt to 2nd monitor?

You will need a Mini DisplayPort (Thunderbolt) cable and an adaptor for the type of connection your monitor requires. You will find the adaptors at Apple's online website.

I just got the new macbook pro about 2 weeks ago, it has lion. When the new mountain lion comes this summer, can i just update it on my macbook pro since it isn't so old? And if i can update it, do i have to pay, or is it a free update?

I just got the new macbook pro about 2 weeks ago, it has lion. When the new mountain lion comes this summer, can i just update it on my macbook pro since it isn't so old? And if i can update it, do i have to pay, or is it a free update?

I'm in the same position, the store said they didn't know of any new release, so i bought my macbook pro to find out about mountain lion. I really hope that i'm not going to pay for the upgrade. New to apple, also last month bought my Ipad 3, really thought that Airplay would have been on my book pro, nope, waste of time.........need that update to use it. Back i the box then, get the windows 7 ultimate pro back out until then.

My old laptop broke (idk what kind) and my iTunes was on there and now i got a new macbook pro. how do i get my itunes music and videos and etc. on this computer without removing them on my phone? please help!

My old laptop broke (idk what kind) and my iTunes was on there and now i got a new macbook pro. how do i get my itunes music and videos and etc. on this computer without removing them on my phone? please help!

If the old laptop was a mac also, then use your Time Machine backup to restore you user settings and files.

HT3986 how do you enlarge boot camp partition after windows is installed

how do you enlarge boot camp partition after windows is installed

Welcome to the Apple Support Communities
You can do it with third-party programs, but I don't recommend it because you can damage the hard drive. The best way to do it is to delete your Windows volume and create it again with the size you need

How do you dual boot Windows XP on a Mac?

I'd like to know the best way to use dual-booting to run both Windows XP and Mac OS X on my G4 PowerPC machine. First of all, is this even possible with a PowerPC? I don't know if it only works with Intel-based Macs or what... I'd appreciate it if someone could point me to a good, beginners tutorial on dual booting. I have the Windows XP installation disc, a PC, and my Mac.

I won't need to install the Windows XP operating system, will I?
From the website Niel linked: "Q [kju:] emulator is a feature packed Cocoa port of QEMU: Run Linux, Windows, and other systems on your Mac. " Note it says "Run Windows", it doesn't say run Windows programs. I have zero experience in this but my reading of that is that you have to have another OS to install. Q just lets the Mac pretend to be a PC without software. If you want to run a Windows game you have to install Q, then Windows, then the game.
In general emulation is often slow. You're talking about games. If you mean video style games then those can be very demanding I would not expect too much of this kind of setup. Again in the link somebody mentions running it on a G4 and it is slow.

How can I dual-boot Mac OSX and Linux Mint?

Hey guys, I was wondering if it is possible to dual-boot both OS's similar to OS X and Windows 7/8...but first I'm wondering if it will void my MacBook Air Warranty (w/ AppleCare) as ultimately it wouldn't be worth it then!
Thanks!
-Stu

Which CD are you trying to use?
Mac OS X 10.4 (Tiger) originally came on DVD.
A media exchange program initially was available:
http://images.apple.com/macosx/pdf/TigerMediaExchangeFormv5.pdf
So maybe you did an exchange for CDs?
You may find this article helpful:
http://weblog.techdad.net/2006/11/12/dual-boot-mac-osx-and-ubuntu/

Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

Hello guys, I've been facing an issue here
I bought an SSD 2 years ago and changed the original MBP HD. I did a fresh install of OSX while still having my optical drive. Everything is fine with the OSX installation.
Recently I bought an enclosure and installed the original MBP HD drive into the optical drive slot. Now i have two HD's on my MBP (Early 2011 - Unibody Model)
The configuration for the Hard Drives is as follows:
SSD Drive - disk 0 - OS X Running fine
HD Drive - disk 1 - clean formatted to accommodate Windows 7 installation
I started the BootCamp Utility formated the second hard drive to install windows from bootable USB. Everything works fine until the point where the Windows installation actually expands the files. I always get the same error, that windows cannot be installed on that drive and any changes will be reverted back to original settings.
Several hours after researching the whole thing this is what I've got:
The error that I am getting is for the configuration of the drives, a fix to this problem is to take out my SSD, install the old HD in its original position, install windows normally, put my SSD back in its position and put the old HD in the optical drive and thus I will have the Dual Boot of two OS in two different HD's. That's really really awful as I have to take appart again the whole thing and swap between the drives till the process is finished. This is because The EFI boot + Windows to be installed require the disk that windows to be installed to be on main slot - disk 0.
My question here is, is there any fix to the BootCamp assistant to let me install windows on the hard drive that it is located on the disk 1 position?
Moreover is there any way to install windows through the environment of OSX with the use of a VM, but, the windows to be a bootable OS rather than a VM bootable image? (on disk 1 - optical drive SATA port). - What I mean by that is, while running OS X normally on disk 0 run a VM software that will mimic the environment of a bootloader so that I can install windows on disk 1, but after I shut down my computer, windows should be accessible on disk 1 as a normal installed OS.
Sorry for the long post and thank you very much for your time, any suggestions would be really helpful.

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

How do you connect picopix to MacBook Pro, How do you connect picopix to MacBook Pro

How do you connect a MacBook Pro to a picopix projector??

Does your new MacBook Pro have the retina display? if so you can get a HDMI to VGA adapter here- http://store.apple.com/us/product/HB416ZM/A/belkin-hdmi-to-vga-projector-adapter ?fnode=51
It's a bit pricey but should do the trick.

Student discount for a macbook pro, how do you save $200?

With the discount you can buy it for $1099 the 13inch macbook pro, thats only $100 discount (regular price $1199). Can someone explain please why it shows you can save $200?

The higher the price, the larger the discount.
On MBP 13" you get $100 off, on 15" (all models) you get $200 off. Sub-$100 discounts for Time Capsule, etc.

In Safari on a MacBook Pro, how do you open a new blank tab while leaving the site you were on still on another tab?

This is my first Mac computer, and this may be a silly question, but I can't find the answer anywhere else. Anyway, is there a way to open a new tab that's blank? Like in iPhones, you can click new page, and a blank page opens up. Anyway that's possible on Macs? Or do I just need to download Chrome?

A new tab can be obtained with command-t, or via the File menu, or with the + sign at the end of the tabs, or....
What happens when a new tab is opened is determined via Safari > Preferences > General.
You will want to select "Empty page" under "New tabs open with".
charlie

How to install Dual OS(solaris 10 and Windows XP)?

I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
Primary partition-5GB
Remaining are extended Partition.
Extended partition details
8 gb NTFS partition(installed windows XP)
7 gb NTFS partiton(No data in it)
20 gb NTFS partition(No data in it)
20 gb NTFS partiton(has data in it)
15 gb RAW partiton
I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
Saravanan
Message was edited by:
SaravananMandala

Windows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania

Ultra 40-M2: How to dual boot Solaris 10 and Windows XP?

I have an Ultra 40-M2 with 3 300-GB SAS drives.
First two drives I will use for Solaris 10 and mirror them using Solaris Volume Manager.
The 3rd hard drive contains Windows XP. I want to be given the option of booting into Windows. By default, I want to boot into Solaris 10.
How do I enable all this? Is there a configuration file I need to edit in Solaris to create this dual boot?

You don't need to configure GRUB. If the third drive is XP only, you can setup the boot order in your BIOS and when you boot the system you can hit the F8 key and select to boot from your XP drive.
It works very well for me.

Dual-Booting Arch Linux and Windows 7

Hello,
I am attempting to set up a dual-boot configuration with Windows 7 (installed first), and Arch Linux. When I went to install, I read in the documentation that the AIF doesn't support installing GRUB to a separate partition other than the MBR on the drive. I want to install GRUB separate from the Windows MBR so I can use Easy BCD to chainload the two bootloaders (i.e. installing GRUB on /dev/sda5 instead of /dev/sda). I went through the installation process and tried to install GRUB manually via the instructions given in the documentation. But when I went to boot Arch, I was greeted with the GRUB shell instead of the boot menu. What did I do wrong? And is there any easier way to install Arch this way given that I do not want to overwrite the Windows bootloader? I went ahead and wiped the Linux partitions on my drive, so I am going to do the install again once I have some suggestions.
Thanks!

joshuawagner147 wrote:
hyperreal_logic wrote:
To the original poster:
If you want to chainload both Windows and Arch Linux using your preferred boot manager, you'd have to create a separate 'boot' partition when installing Arch Linux. When you are in the Arch installation, create a separate partition of about 500 MB, then create the root partition of whatever size you need, and then create swap partition if necessary. So your HD would resemble something like this: /dev/sda5=boot partition of 500 MB; /dev/sda6=root partition of ## MB/GB; and /dev/sda7=swap partition of (RAM * 2) GB. Then continue with the Arch installation procedure until you get to the end where you are prompted to install a boot loader. Choose GRUB, and install it to the 'boot' partition on /dev/sda5. This will allow you to chainload Arch via Easy BCD. What happens is Easy BCD will pass the message to GRUB on /dev/sda5, and GRUB will then load your Arch root system on /dev/sda6.
I hope this helps. I support your choice in using Easy BCD to chainload Windows and Linux. Software is, after all, about choice. Furthermore, you've presented a good reason to use Easy BCD as the main boot loader, which is to save you from unnecessary tinkering with the GRUB shell or Live CDs and whatnot. However, if you don't want to create the separate 'boot' partition, then you'll have no other choice but to use GRUB or syslinux on the MBR.
Thanks. Yes...I followed the procedure just like you described. I figured that my problem was that I didn't create a separate /boot partition, so I reformatted the partitions I created and redid the install. However, I was not able to install GRUB in the AIF; I had to reboot into the Live CD and install GRUB to my boot partition manually. All is good now as I have a working dual-boot now. Arch Linux has been a sort of learning curve for me, but I have gained valuable knowledge and experience by using this distro.
Yes. I didn't want to mess with GRUB or NTLDR. I know that reinstalling NTLDR is not that difficult, but I didn't want to mess with it at all. It just seemed easier to chainload GRUB to NTLDR using EasyBCD. I'm a sort of "distro-hopper" anyhow, and using this method allows me to cleanly remove any distro I install without having to mess with GRUB or reinstalling NTLDR.
Thanks!
Glad to hear! Yes, Arch Linux is a wonderful distribution, and one of my favorites. It's great for not-so-newbie beginners to learn from. pacman is one of my favorite package managers, as there is always the latest stable software available in the Arch repos. Glad everything worked out. Have fun with Arch!

Just loaded windows 7 on a macbook pro - how do you dual boot OS X and windows 7

Similar Messages

Maybe you are looking for