JUST MOVED TO AUSTRALIA NEED HELP

Please help me! I have just moved from the UK and I have brought my old ipod (15gb) I have just recently bought a pc on Australia and have down loaded itunes. Will i be able to save my ipod music on my new pc without losing all the 5000 songs??? Please help me as all the songs are back in the UK.

heya gary!
yes i have found what i was looking for. if you download WINAMP off www.winamp.com you are half way there. after that has installed, if you go back onto www.winamp.com/plugins and download the ml_ipod plugin, after the installation you can load it. if you have your ipod connected, it should automatically pick it up and give you the option of copying the music from your ipod onto your computer.
I hope this helps!
Sarah x

Similar Messages

Just moved- do I need to change my Apple ID and email address on record since I no longer have access to my previous emails?

Just moved- do I need to change my Apple ID and email address on record since I no longer have access to my previous emails?
I used to be with roadrunner and no longer have roadrunner. I now have a gmail account.

Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
 Cheers, Tom

I just got logic and need help i dont know how to make a track at all

i just got logic and need help i dont know how to make a track at all

Pancenter wrote:
There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.
Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
pancenter-
Hey Pancenter there are still lots of us about.
I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

Everytime when i slide down to my notifications, it freezes of what im doing, AND when i go to my messages, there's nothing and it's just blank. I Need help please?

Everytime when i slide down to my notifications, it freezes of what im doing, AND when i go to my messages, there's nothing and it's just blank. I Need help please?

The next best suggestion I have is to back up your device in itunes and restore the software back onto your device. It sounds like you might have had a error when downloading the software update.
http://support.apple.com/kb/ht1414

Just Moved, Want to Use My e3000 as just an access point NEED HELP

Hey, I just moved into a house the other day, the router/modem is upstairs, my desktop/xbox only has wired capabilities, and my laptop has wifi. I was trying to just make a bridge with my my laptop to my desktop while i try and figure out how to get all my stuff working again, but found out the jack in my laptop is broken, so it only has WIFI.
My question is, am I able to use my e3000 to connect to their wifi signal via wifi, in which i can just run a cable to my xbox and desktop within the room?
I cant run 2 cable from upstairs to downstairs for my desktop/xbox, so was hoping this was possible. thanks

Yes, and you can turn wi-fi access on after enabling airplane mode if you want or need internet access via an available wi-fi network.

Using Time Capsule as just a backup. (Need Help)

There are two Time Capsules in our home. We use one with our modem for our home Wi-Fi. The one that I have on my desk, I would like to just use it as a back. Does anyone have any idea as to how I can set it up to my iMac for just a back up?

Yes, it is relatively easy.
How is the imac connecting to the internet now??
The answer depends on this..
Ethernet.
if you use ethernet, then could not be simpler.. bridge the TC.. plug the ethernet that was in the imac into the TC.. and plug the imac into another port on the TC.. it is now a switch and AP.. so turn off wireless.. and use it as your TM destination.
Wireless.
If the imac get internet by wireless.. setup the TC as router might be easier than bridge.. either are possible though. Plug it by ethernet into the computer. You might need to turn off wireless just to finish the setup. You need to move the TC to a different IP range. ie if you have two TC the second one cannot be the same IP as the first. Bridge avoids this issue as used above. Set the ethernet ip of the TC to say 192.168.1.1 .. set the ethernet on the computer to 192.168.1.10 with 255.255.255.0 subnet.. no router no dns set. (This is assuming the main TC is not using the same IP range). You may have to turn off the various errors that the TC will come up with.. just ignore them.. the TC is now isolated from the network for your exclusive use.
There are other methods.. like using wireless extend.. so ask more if you need more.

Moving to CF10, Need help with Application.cfc

I've been googling about how to work with Application.cfc since last week but I still have some questions and I can't find the answers.
My application is under the root (in unix) and there are many subfolders underneath it. Each sub-folder is hosting a different web application.
From what I read, I can create 1 root Application.cfc and then on subsequent sub-folder, when I need to have another Application.cfc on that level, I can create ProxyApplication (see below) and then create a sub-folder level Applicatin.cfc
So, when I set an application.DSN on my root Application.cfc, using proxyApplication I don't have to reset this dsn again in my sub folder level Application.cfc
Since my loginform.cfm and loginaction.cfm is right under root directory too, I also set OnsessionStart in the root Application.cfc to handle user login. Then this means, I don't have to reset session variable again anywhere because session.username, etc has been set on the highest level.
Is this correct?
In addition, Am I correct when I do the following:
1. Since I have root level and sub-folder level Application.cfc, I should set this.name with a different name, am I right?
    On the root Application.cfc I set this.name = "StudentServices" because this represent the global application
    On the sub-folder level's Application.cfc, I set this.name to "StudentServices_stdLoad" becaus this sub-folder only handle student load application.
2. On the root Application.cfc, I set the DSN to the application scope. So on the sub-folder level Application.cfc I can check if a particular db is working or not
    because as awhole, in the global sense, this web application uses more than one Databases. Each sub-folder may use a database that is dfferent than the other sub folder.
Am I doing the right thing? Please advice
Below is example of what I have, Thank you!
I created a root Application.cfc under the root directory:
<CFCOMPONENT displayname="Application" output="true" hint="My Root Application component">
       <cfset THIS.Name = "StudentServices" />    <cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,30,0) />    <cfset THIS.SessionManagement = true />    <cfset THIS.SetClientCookies = false />
       <cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
   <cfset application.MainDSN = "DSN1">
   <cfset application.ReportDSN = "DSN2">
   <cfreturn true/>
</cffunction>
<cffunction name="onApplicationEnd" output="false">
     <cfargument name="applicationScope" required="true"> </cffunction>
<cffunction name="onSessionEnd">
</CFCOMPONENT>
Then, in this root directory I also created a ProxyApplication:

<cfcomponent name="ApplicationProxy" extends="AdvancementServices.Application">
</cfcomponent>
Then in the Sub-Directory, I can create a sub-folder level Application.cfc extending the root Application.cfc:
<CFCOMPONENT displayname="Application" extends="ApplicationProxy">
    
    <cfset THIS.Name = "StudentServices_stdLoad"/>
    <cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,30,0) />
    <cfset THIS.SessionManagement = true/>
    <cfset THIS.SetClientCookies = false/>
    <cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
       
       <cftry>
       <cfquery name="TestMain_DSN" datasource="#application.MainDSN#" maxrows="2">
         SELECT Count(*)          FROM MyTable
       </cfquery>
         
        <cfcatch type="database">
          <cflog file="#this.name#" type="error" text="Main DSN is not available. message: #cfcatch.message# Detail: #cfcatch.detail# Native Error: #cfcatch.NativeErrorCode#" >
         <cfthrow message="This application encountered an error when connecting to the Main Database. Please contact support." />
         <cfreturn false>
       </cfcatch>
     </cftry>
     <cflog file="#this.name#" type="Information" text="Application #this.name# Started">
     <cfreturn true/>
   </cffunction>
</CFCOMPONENT>
    <cfargument name = "SessionScope" required=true/>     <cfargument name = "AppScope" required=true/>
</cffunction>
<cffunction name="OnSessionStart" access="public" returntype="void" output="false">
<CFSET session.UserGroup = ""/>
<CFSET session.UserName = ""/>
<CFSET session.currentPage = ""/>
<CFSET session.loggedin = "No"/>
<CFSET session.userrights = ""/>
<cfreturn/>
</cffunction>

OK. It sounds to me like you really shouldn't be using a single root Application.cfc at all, if all you want to do is share some settings between your "sub-applications". I would look at storing the common settings in an external file that all of the applications can read in. The simplest way is to put the settings in a .CFM file somwhere outside of the web root (so it is not directly web accessible) and load it with <cfinclude> tag into the OnApplicationStart() method of each sub-application's App.cfc. That .CFM file can be as simple as:
<cfset application.myCustomSetting = "blahblah">
<cfset application.myOtherSetting = "foo">
Alternatively, you can look at using a config file like this Ray Camden blog post suggests, and use the GetProfileSection(), GetProfileString(), and SetProfileString() functions as needed within OnApplicationStart(). You could even put ALL of your settings in
A third option is to store your settings in an XML file or in JSON format in a text file. You could then write code to read in the XML file, and use something like xml2struct.cfc to convert the XML into a struct, then append the struct to your application scope. If you go the JSON route, then just read in the JSON file and use DeserializeJSON() to convert it into a struct, and append it to the application scope.
What I think is probably the best approach is to use a community-supported MVC framework like FW/1 or ColdBox (maybe you already are, I don't think you've said so though). One of the many advantages to doing so is that they have built-in "environment" support that can be used to configure common settings, depending on your environment (dev/qa/production). You would handle reading in your external settings through the "environment" mechanism.
One other thing to think about: your login mechanism. I think you want to use one set of login tools that is shared by all of the "sub-applications". You can do this also by putting the login/authentication-related code somewhere outside the webroot of your applications, and then either set up a mapping to that location in CF Admin, or set an application-specific mapping in your various App.cfc files. That way all the "sub-applications" share a common set of code for the login process. I don't know how your login process works (do all users go to the same login page then get redirected into their relevant "sub-application", or does each "sub-application" have a discrete login page that utilizes common back-end processes to authenticate and redirect), so you'll have to judge how that is best accomplished.
Hopefully this gives you some useful ideas.
-Carl V.

Buy new iphone with just 30 days warranty (need help pls)

Hi all, i've just bought an iphone 4s 32Gb with zp code (hongkong) for my friend on February 11 2013. and didn't activate it until now
i looked up in estimated expiration date ended on April 13 2013.
I have no ideas why it's happen. Can somebody please help me with this.
Thank you

Someone else purchased this phone. It has been re-packaged & sold to you as new. Again, that's what can happen when you don't purchase from an authorized source...you get scammed.
Sorry this has happened to you, but no one here can help you. You'll have to deal with the folks you purchased this phone from.

Very n00b error....just started programming and need help?!?!

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration: <Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new Greeter();
^
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new Greeter();
^
2 errors
Process completed.
ok i get this error message alot....well actually just about everytime..
I got it working just once using texteditor but have no clue how i did it that time...now nomatter what i try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still compile with this error..
if anybody with patience could tell me what i need to do
would i have to configure java some more with variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to
compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration:
<Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5:
cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
s\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find
symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
get this error message alot....well actually just
about everytime..
I got it working just once using texteditor but have
no clue how i did it that time...now nomatter what i
try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still
compile with this error..
if anybody with patience could tell me what i need to
do
would i have to configure java some more with
variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance
Well here is all that goes
As you said you were pretty new
I suspect the following error done by most of the novice programmers in JAVA
Where is the Greeter class ??
ok may be you must have defined it somewhere else
Mostly the Java Compiler hasnt found out your Greeting class
Try locating that " Greeter.java"
or mention it in an other file located in the same folder as "Newprog.java"
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();

Just bought used MBP, need help registering Mountain Lion

Hi guys, I'm very new to the Apple community. I recently bought a used Macbook Pro (October 2011) on eBay, the seller tells me that in order to actually use this computer, I need an Apple ID and have bought/downloaded Mountain Lion.
I want to get this all sorted out before I recieve my MBP in the mail. Here's my problem, I have obviously made an Apple ID, however I can't seem to buy and download Mountain Lion on this site......I'm using a PC laptop currently. I don't have access to any other Mac computer to buy a copy of Mountain Lion (if that even is the correct terminology) in the meantime.
Is this whole process even necessary? What should I do?
Thanks,
Devin B

With Apple's new delivery system of the OS and the new licensing requirements to go along with it, it has become ridiculously confusing. Have the seller use Internet Recovery and do the following: boot holding down Command + Option + R to get to Disk Utility. Wipe the drive. Reinstall Mac OS - using the internet recovery will reinstall the original system (whereas using the regular recovery will reinstall the current system), so he must use the internet recovery. Shut down computer when it is either done installing, but just before the setup screen comes on. You can boot up and set it up using your own ID. Later, you can buy Mountain Lion and install it. This should work (no guarantees though - the "official" way from Apple is for the seller to contact iTunes and un-register his license in an email to them advising them that you will be buying it). That info is from a senior advisor at Apple.
With all this, remind the seller to also deauthorize the computer in iTunes.

Just bought IPhone and need help

I just bought my iphone and i have installed the AIM program. As I am trying to connect i am recieving a message that says to access the AIM network i must have a network connection. WHy is this happening. Doesn't this work on the 3g network or do i have to have the WIFI connection in order to use this?

Check out the part on network connectivity
http://support.apple.com/kb/HT1737
You need to have a "E", "3G" or Wifi icon to the left of your Cell Provider up at the top. If you are on WiFi then check and make sure you are getting a valid IP address. If you are on Edge or 3G make sure you are able to check the weather and get safari.
Some troubleshooting steps might be iPhone > Settings > General > Reset > Reset Network Settings or contacting your Cell Provider to make sure the data plan is set up properly.
If everything work except aim try removing it and downloading it again and see if it has the same errors with a different aim account. You can make a new one at http://www.aim.com/helpfaq/startingout/screennames.adp

Just another person that needs help, yes in a rush and yes is very upset

I installed the ipod program into another computer today and when I went to open it all my songs were gone. On the computer it was orginally on I have all my songs in my library but can't put them into my ipod. it won't let me. i uninstalled the program and reinstalled it and all my songs were still there but I still couldnt transfer them into my ipod. Mean while the program is working on the other computer but I have all my songs on the other computer. Please help me get my music back into my ipod. please!!!!!

if you installed iTunes on a new computer, there will be no music in the Library since it was a clean install
you either need to:
1) start downloading/importing music from iTMS or ripping CDs
2) or copy the contents of your iPod into iTunes
with your ipod connected, go to iTunes--Preferences--iPod
change Automatically Manage to Manually Manage songs

Just got my ipod need help with movies!

I just got my ipod, I have put all my music on to it just fine. I downloaded quick time pro. I watched a tutorial on the site saying if I just need to select the file and choose the export to Ipod option and it will appear on my ipod. Well this did not work, I have exported atleast 3 videos and do not know were they go? They did not change format and they did not appear on my ipod or in my itunes movies or library. I have no clue what to could someone plz tell me what to do to get my movies on to my ipod.

i always found my videos that i converted with QT7Pro in my documnets folder. Adn fromt here i simply draged them to my itrunes library upon which after syncing my ipod they appeared there next.
Also before asking questoning about movies and geting them on your ipod lok here and follow the instructions exactly and ask your questions on the software on their forums.
http://www.videora.com/en-us/Converter/guides.html
http://www.pspvideo9.com/forums/index.php?c=8&sid=f2c892bfebe74f08e22f700a85cc87 47
http://www.videora.com/en-us/
GFF

MOVED: P7N2 Diamond NEED HELP XD

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=131285.0

Do you have Real Temp & CPU-Z utilities? Real Temp will have the VID of your CPU. CPU-Z will show your CPU voltage & other useful info. When running stock, what does CPU-Z say the CPU Volts are? In bios Cell Menu, CPU V. is in increments of added voltage, as an example, if your CPU is at 1.24, & you want 1.36, change the Cell Menu CPU V. setting to +0.12.
SPP = 1.4 (This looks like a NB V. setting)
MCP = 1.55 (This looks like a SB V. setting)
In 'Advanced Bios Features' - 'Chipset Features', disable HPET. In bios 'Cell Menu', 'System Clock Mode' - 'Manual' (set desired settings accordingly) , 'D.O.T.' - disable, 'Spread Spectrum' - disable.
Use the Forum Search Button on P7N2 threads if you haven't yet. There should be some useful info that will help.

HT3819 When trying to activate Home sharing on Apple TV it says Apple ID couldn't be found, home sharing on iTunes says there is an error 5506, I can log in with my Apple ID just fine other places, need help!

I have been trying to activate my Home Sharing on both iTunes and my Apple TV 2. When I try on the Apple TV I get a message that my Apple ID cannot be found. When I try to activate in iTunes I get an error message number 5506. I haven't been able to find any troubleshooting help on theApple webpage and would appreciate any advise that could be me up and running.

I have been trying to activate my Home Sharing on both iTunes and my Apple TV 2. When I try on the Apple TV I get a message that my Apple ID cannot be found. When I try to activate in iTunes I get an error message number 5506. I haven't been able to find any troubleshooting help on theApple webpage and would appreciate any advise that could be me up and running.

JUST MOVED TO AUSTRALIA NEED HELP

Similar Messages

Maybe you are looking for