Just need some things cleared up?
1. Is it good to have you mini go to sleep when not in use?
2. Should I use secure virtual memory?
3. I have heard mixed signals about running the daily, weekly, and monthly scripts with say onyx. Is this good to do or bad. And if good when the computer is asleep automator won't run those right, or do scripts like those run on there own within tiger?
Thanks
My computer is almost never shut down and NEVER put to sleep.
There are three settings in the Energy Saver prefs panel. My setup is as follows (I have a French system so the actual wording in English may be different than my translation):
Suspend computer activity (i.e., put completely to sleep) NEVER
Suspend screen activity (i.e., darken monitor) after 15 minutes
Suspend disk acrtivity whener possible BOX CHECKED
This means the processor is always running, the screen goes black when I'm away and the hard drive is on standby and is available at any time the processor needs to access disk. All the regular processes, including the nighttime CRON system maintenance processes can run as scheduled and my e-mail can be checked every 240 minutes as scheduled. It avoids any possiblity of sleep-related freezes or crashes that have in the past been a problem with several Mac systems.
In my workplace, there is an extended area network of 1200 Windows computers that are configured in a similar manner. We are not ever allowed to shut down our computers. We can open and close user sessions and the screens go to a corporate logo screensaver after 5 minutes of idleness and a password is required to resume access.
I'm sure there have been hardware failures for a variety of reasons in the last 26 years, but in my workgroup of 60 people, in all that time I recall only one person who had a hardware failure (a dead hard drive). We change hardware about once every five years, on average.
Except for the argument that putting a computer to sleep or turning it off saves a tiny bit more energy than letting it idle like I do, I don't know of any practical reason to use sleep mode or to to shut down completely. Before the present Mac Mini, I ran a PowerMac 8600 for 7 years in the same way and the only hardware component that ever failed was the PRAM battery (in year 6).
Similar Messages
-
Hi i just need some pl/sql materials and apps materials
Hi,
friends i am krish getting trained on orcale just need some materials to leanr quickly pl/sql
thnx for the sender
Thanks & Regards
krishfor R12,
http://download.oracle.com/docs/cd/B40089_08/current/html/docset.html
And for pl/sql
http://download-uk.oracle.com/docs/cd/A97630_01/appdev.920/a96624/toc.htm
Message was edited by:
Nitesh Jain -
[VIA] Just need some input on a problem I have
I need the experts on this forum to help me with a problem I have. The M/B (6590 KT4 Socket A) had a few problems a while see. Since that time I have not updated my PSU as advised so I expect some abuse for that .
Any way I managed in the to fix that problem as you can see. However a further problem occured which was that the PC ,at will , would restart - this ended being the reset switch which I disconnected and this has never happened since. Now I have another problem ! .
The PC will simply hang with no response at all. It seems only to happen when I am running the capture software. I have checked for updates and applied these to the program (hauppauges WnTV). This set up was running on another PC with a M/B (in my opinon) of inferior quality without a problem (I have since sold that PC).
I will admit I have not run the PC without this program running to see if that is the cause. However I just needed input on suggestions. My PSU is as I said earlier the same as before which is an X Pro 400w these are the shameful Voltage rails :
+5v = 35a
+12v = 20a
-5v = 0.5v
-12v = 0.8v
3.3v = 22a
5+VSB=3a
Also when the PC hung I got the following readings from PCAlert:
1.76 Vcore
3.3v = 3.26v
+5v= 4.97
+12v = 12.24
CPU temp = 44c
System temp = 38c
I must admit that the previous PC had a separate USB2 (which is how the Happauge unit connects) card whereas this PC I use the onboard card. I was also thinking about the RAM as it was one I bought from a computer fair (hears groans) - This is normally something I do not do.
Help input would be appreciatedQuote from: Dr Stu on 26-November-05, 05:58:45
look on the PSU label for the Max Combined Watts 3.3v & 5v and post what it says
KT4 doesn't have a 4pin 12v connector, right? so that board depends on 3.3v and 5v rails
The Max watts are 210Watts
Quote
While waiting for the experts, three things come to my mind:
- IRQ problem, most often some/the card is in the wrong slot.
- Graphics driver, most often you have updated too far.
- Memory problem, most often mixed, but could also be there are things/drivers meeting in the memory that doesn't like eachother. If you have a lot of Autostarting thing that could be the reason, like a CD copying program and the capture program.
It cannot be an IRQ conflict as the Capture card is USB2. Graphics card has up to date drivers. Startup software on this PC is no different to the preivous apart from PCAlert4
Quote
"...It seems only to happen when I am running the capture software..." Have you tried another program system intensive demanding ? If you have done, and nothing happens, it would show that the capture device/driver is giving problems. Is that USB device self powered or takes it's power from USB port ? It's running at USB 2.0 speed ? 22 A to 3.3v. rail is poor for your Mobo. You should post your complete PC specs.
I dont really have any other software than can do that. The USB device is powered by itself.
PC is as follows:
AMD 2100+
1 512mb ram
2 HDD - 1 80gb Hitachi 1 120gb hitachi
Nvidia Geforce mmx 64mb ram Graphics card
1 SCSI CDROM Teac
1 SCSI CDRW Yamaha
1 IDE DVDROM Sony
1 IDE DVDR LG
Quote
Make sure that the pathway to were you want to save the captured video is set correctly. I believe you can set the Audio quality and the Frames Per Second (FPS) and I think that you can set the compression, If in doubt try it without compression and see if that works. I too have a TV card and it seems to me that you are having a config problem. Hope that helps.
The location where the files are captured to is to the secondary drive which is the 120gb
Hope thats enough information -
I just need this thing to work, already wasted an hour on it! what next??
clafter you pay, what next? I just need to update a downloaded flyer, time deadline, no clear instructions and not workingyet on my computer!
What happens when you try to use it? With the Export PDF button in Adobe Reader? Or visiting http://exportpdf.adobe.com/
But don't expect too much. PDF files aren't made for editing. The layout may change beyond recognition. -
Hello,i just need some information
Hy,i just have some questions...First,i am in project for creating some website with streaming video.The connection to the host is bad and i need to know if Flash media server can reconnect if connection is lost during playback and second,is there some kind of plugin for subtitles,this is very important,If there is a positive answers on those two questions,the third would be "where can i buy it and how"?
First question: Yes very much. You can write simple logic for reconnection. Also there is new feature called Smart Reconnect which you can use for this purpose.
Smart Reconnect links: -
http://help.adobe.com/en_US/FlashMediaServer/3.5.3/FeaturesGuide/flashmediaserver_3.5.3_fe atures.pdf
http://aspexamples.adobe.com/flash/streamreconnect.html
Second question: - I am not aware of such plug-in personally but there are high chances that it might be available. But i want to know first how you want to achieve it - are you sub titles not embedded in movie itself or is it separate from movie content and if yes in what format. Even if one is not available for ready to use - i think developing one should not be big deal - it can simple as overlay on your client side which gets populated with text at runtime.
Third question: You can download it from http://www.adobe.com/products/flashmediaserver/ (just choose your edition & on that page you should have download link) - OR once you decide to buy you can send your contact details(Name,Email,Phone,Geo Location) to me via private message and i can help you get in touch with right person. -
If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!
Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems -
ASA 5505 unable to access ASDM ( just needs some ports ope and FWDing setup)
I was able to access the ASDM launcher in the browser yesterday via https://192.168.111.1/admin and I was stuck there as the browser version says that my ASA image does not work with my ASDM version... So i tried some trouble shooting and think that i may have changed the image to an image that does not exist. (I'm not sure where it is that I would actually place that image either) Now i am unable to access through the browser at all.
Anyways, I am ok with SSH/CLI and have been using my firewall in this manner. I am walking into this companies current configuration and simply need to do the following:
I need to OPEN ports 9000, 85, 40085, 49005 so that my mobile device can pull my security cameras in the office
I need to set port forwarding so that any connections that hit outside-in ip address 205.214.36.53:1610 >>> http://192.168.111.30:1610/AndroidWS/ for our new mobile CRM.
I have been through some of your related discussions and am falling short somewhere. Please help
here is my "show run" and my "dir"
ciscoasa(config)# show run
: Saved
ASA Version 9.0(2)
hostname ciscoasa
domain-name scec.local
enable password ol40hHpZTtZQFXMJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ol40hHpZTtZQFXMJ encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif INSIDE
security-level 100
ip address 192.168.111.1 255.255.255.0
interface Vlan2
nameif OUTSIDE
security-level 0
ip address 205.214.236.50 255.255.255.240
boot system disk0:/asa902-k8.bin
boot system disk0:/asa825-k8.bin
boot system disk0:/asa831-k8.bin
ftp mode passive
dns domain-lookup INSIDE
dns domain-lookup OUTSIDE
dns server-group DefaultDNS
name-server 192.168.111.50
name-server 8.8.8.8
domain-name scec.local
object network LAN
subnet 192.168.111.0 255.255.255.0
object network SERVER1
host 192.168.111.50
object network SERVER1_PUBLIC
host 205.214.236.51
object network SERVER2
host 192.168.111.20
object network SERVER2_PUBLIC
host 205.214.236.52
object network SERVER3
host 192.168.111.30
object network SERVER3_PUBLIC
host 205.214.236.53
object network SERVER4
host 192.168.111.40
object network SERVER4_PUBLIC
host 205.214.236.54
object network SERVER5
host 192.168.111.10
object network SERVER5_PUBLIC
host 205.214.236.55
object-group service SERVER1_PORTS tcp
port-object eq www
port-object eq https
port-object eq smtp
port-object eq pop3
port-object eq imap4
port-object eq 3389
object-group service SERVER2_PORTS tcp
port-object eq 3389
object-group service SERVER3_PORTS tcp
port-object eq 3389
object-group service SERVER4_PORTS tcp
port-object eq 3389
object-group service SERVER5_PORTS tcp
port-object eq 3389
port-object eq www
port-object eq https
access-list OUTSIDE_IN extended deny ip 10.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 172.16.0.0 255.240.0.0 any log
access-list OUTSIDE_IN extended deny ip 192.168.0.0 255.255.0.0 any log
access-list OUTSIDE_IN extended deny ip 127.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 0.0.0.0 255.255.255.0 any log
access-list OUTSIDE_IN extended deny ip 244.0.0.0 255.255.255.240 any log
access-list OUTSIDE_IN extended deny ip host 255.255.255.255 any log
access-list OUTSIDE_IN extended permit icmp any any echo-reply
access-list OUTSIDE_IN extended permit icmp any any time-exceeded
access-list OUTSIDE_IN extended permit icmp any any unreachable
access-list OUTSIDE_IN extended permit tcp any object SERVER1 object-group SERVER1_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER2 object-group SERVER2_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER3 object-group SERVER3_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER4 object-group SERVER4_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER5 object-group SERVER5_PORTS
access-list inside-out extended permit ip any any
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu OUTSIDE 1500
ip audit name OUTSIDE_ATTACK attack action alarm drop
ip audit name OUTSIDE_INFO info action alarm
ip audit name INSIDE_ATTACK attack action alarm drop reset
ip audit name INSIDE_INFO info action alarm
ip audit interface INSIDE INSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_ATTACK
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
ip audit signature 6051 disable
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-509.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (INSIDE,OUTSIDE) source static SERVER1 SERVER1_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER2 SERVER2_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER3 SERVER3_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER4 SERVER4_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER5 SERVER5_PUBLIC
object network LAN
nat (INSIDE,OUTSIDE) dynamic interface
access-group inside-out in interface INSIDE
access-group OUTSIDE_IN in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 205.214.236.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 5
ssh version 2
console timeout 0
dhcpd option 3 ip 192.168.111.1
dhcpd address 192.168.111.100-192.168.111.200 INSIDE
dhcpd dns 192.168.111.50 8.8.8.8 interface INSIDE
dhcpd enable INSIDE
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username wti password OIEBfkGT1DRShCnN encrypted privilege 15
username admin password g/t7o/eHDKMomDrS encrypted privilege 15
username vpnuser password 8DcFkqJ9hi39UQw. encrypted privilege 15
username sysadmin password mi1AUI982JWkJuWt encrypted
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6dd04d2527e7929343ebd090969e18a1
: end
ciscoasa(config)# dir
Directory of disk0:/
148 -rwx 15390720 09:08:54 Jul 31 2013 asa825-k8.bin
149 -rwx 27611136 09:43:48 Oct 31 2013 asa902-k8.bin
150 -rwx 2048 00:00:00 Jan 01 1980 FSCK0000.REC
20 drwx 2048 09:12:16 Jul 31 2013 coredumpinfo
151 -rwx 16280544 09:14:46 Jul 31 2013 asdm-645.bin
10 drwx 2048 09:19:42 Jul 31 2013 log
19 drwx 2048 09:20:08 Jul 31 2013 crypto_archive
153 -rwx 14240396 14:14:18 Jun 11 2014 asdm-631.bin
154 -rwx 4096 00:00:00 Jan 01 1980 FSCK0001.REC
155 -rwx 12998641 09:20:28 Jul 31 2013 csd_3.5.2008-k9.pkg
156 drwx 2048 09:20:30 Jul 31 2013 sdesktop
157 -rwx 6487517 09:20:32 Jul 31 2013 anyconnect-macosx-i386-2.5.2014-k9.pkg
158 -rwx 6689498 09:20:36 Jul 31 2013 anyconnect-linux-2.5.2014-k9.pkg
159 -rwx 4678691 09:20:38 Jul 31 2013 anyconnect-win-2.5.2014-k9.pkg
160 -rwx 4096 00:00:00 Jan 01 1980 FSCK0002.REC
161 -rwx 4096 00:00:00 Jan 01 1980 FSCK0003.REC
162 -rwx 4096 00:00:00 Jan 01 1980 FSCK0004.REC
163 -rwx 6144 00:00:00 Jan 01 1980 FSCK0005.REC
164 -rwx 6144 00:00:00 Jan 01 1980 FSCK0006.REC
165 -rwx 6144 00:00:00 Jan 01 1980 FSCK0007.REC
166 -rwx 22528 00:00:00 Jan 01 1980 FSCK0008.REC
167 -rwx 38912 00:00:00 Jan 01 1980 FSCK0009.REC
168 -rwx 34816 00:00:00 Jan 01 1980 FSCK0010.REC
169 -rwx 43008 00:00:00 Jan 01 1980 FSCK0011.REC
170 -rwx 2048 00:00:00 Jan 01 1980 FSCK0012.REC
171 -rwx 26624 00:00:00 Jan 01 1980 FSCK0013.REC
172 -rwx 2048 00:00:00 Jan 01 1980 FSCK0014.REC
173 -rwx 26624 00:00:00 Jan 01 1980 FSCK0015.REC
174 -rwx 2048 00:00:00 Jan 01 1980 FSCK0016.REC
175 -rwx 2505 09:46:08 Oct 31 2013 8_2_5_0_startup_cfg.sav
176 -rwx 1189 09:46:12 Oct 31 2013 upgrade_startup_errors_201310310946.log
177 -rwx 100 16:42:40 Jun 10 2014 upgrade_startup_errors_201406101642.log
178 -rwx 100 14:52:26 Jun 11 2014 upgrade_startup_errors_201406111452.log
127004672 bytes total (21886976 bytes free)
Please let me know if you need any other information from me so that i can get our mobile devices to connect to the new CRM from outside the network and allow the owner access on his mobile device to the company cameras.
************** (NOTE: I can do both of these things currently from within the network without any issues)*************
THANKSJgreene -
This doesn't specifically answer your question, but if you want to get ASDM functionality back you need to load a newer version onto flash memory and then point the ASA to that with the configuration command:
asdm image disk0:/asdm-version.bin
You are running ASA Version 9.0(2) so you need at least version 7 of ASDM to support that. Interestingly enough your "asdm image" statement in your config points to asdm-509.bin and you have asdm-631.bin and asdm-645.bin on flash. None of those will work. I suggest loading up asdm-721.bin and changing the asdm image statement accordingly. I am pretty sure a reboot is required after that is done.
Good Luck!
-Jeff -
I am pretty sure i know but i just need some backup
So this is a question far below the expertise of anyone here. But I need to know for sure. I am working in collaboration with colleague to produce a video. He is gone for a month and I would like to play around with what he has so far. I do not want to permanently do anything to his version however. So I just copied the folder that included all of the media files and everything into another area on the computer. I will be able to just edit my own version and not his right? It won't do anything to his version of the video if I open it from the area where I saved it right?
I just want to make sure. Thanks!No. No. No. Now you've got duplicate media files taking up space for no good reason. What you ought to do (well, anyway what I'd do) is open his project and do a save as Projectname-tyler's copy.fcp Or create a new file of your own and copy the bins from his project to yours. Don't go cluttering up the drives with duplicate media.
Then you can play to your heart's content. FCP is a non-destructive editor. Once you capture a piece of media it stays unchanged on the computer until you delete it. FCP is more like an intelligent database that remembers your requests to do things to a piece of media-- start here, end there, put it in a box over this piece, apply a filter here and there, you get the idea. It's the project file that has all this information, not the folder with the media. -
Need some help clearing up the footage
ok, after 5 days straight of staying up all night and day to figure this program out (i dont have much prior experience with such a complicated program) i finally made my first dvd complete with a menu and all... only 1 problem, why is my video so choppy on the tv? is there some setting i can change to fix this? i am not to familiar with some of the terminology used in the books that came with the program and to be honest i don't really know what I am looking for sometimes when i have a question for the book... anyone have any advice on how to un chop this footage?
hmmm, i compressed the footage at like 4 this morning so bare with me a sec... ok, i think by preview i mean the preview i see in dvd studio pro when i preview my menu, i clicked on one of the videos and watched a bit of it and it was kinda choppy... i dont think i veiwed the video before i compressed it... when i was done cutting up teh films i exported to compressor and compressed all the videos ina batch. about 14 short videos... i used the setting Best Quality: 120 minutes 4:3 MPEG-2 5.0Mbs 2-pass 4:3 .... dont know exactly why i chose this one but i know that i needed to burn in MPEG-2 format in order to play it on a dvd player.... is this helping? sorry guys if i am not clear about this...
-
IMac G5 Repair Extension Program for Video and Power Issues...i read the page that tells how i would now that there is a problem with the Video/Power issues. My serial # is off by 2 digits and I bought my iMac in July but it might have been on the shelf for longer than that.
Also, I was watching a DVD earlier on the computer today and when i was ejecting the DVD the screen had some horizontal lines or some kind of distortion for about 5 seconds. It's all fine but would this make it eligible for the Repair Extension Program.You just bought the machine and from what I can gather its starting to manifest some video problems. I wouldn't worry about the extension I would take it back and get it taken care of plus buy Apple care.
-
I just need some download links
Hi I always come here when i need dowload links and i'm such a idiot it always takes me some time to figure out where the add a post is. Ok I have windws xp sp3, 32 bit home. I need the latest download links for flash player. In internet explorer and opera,firefox. Much thanks. Can't wait to install and have automatic updates.THANKS.
I'm not sure if you need the whole log but here it is thanks. someone understands. flash is working fine. it's the updater that didn't install.
O====== M/10.3.181.34 2011-07-13+18-58-35.750 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\fpUpdateax\fpUpdateax.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0004 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0006 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash6.ocx 20
0007 [I] 00000018
0008 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash6.ocx 20
0009 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10u.ocx
0010 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10u_ActiveX.exe
0011 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10u_ActiveX.dll
0012 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0013 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
=X====== M/10.3.181.34 2011-07-13+18-58-45.828 ========
=O====== M/10.3.181.34 2011-07-13+21-05-05.281 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [F] 00001041
=X====== M/10.3.181.34 2011-07-13+21-05-05.468 ========
=O====== M/10.3.181.34 2011-07-13+21-05-26.343 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0005 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0006 [W] 00001036 Software\Opera Software/Last CommandLine 2
0007 [W] 00001036 Software\Opera Software/Last CommandLine 2
0008 [W] 00001036 Software\Opera Software/Plugin Path 2
0009 [W] 00001036 Software\Opera Software/Plugin Path 2
0010 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0011 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10u_Plugin.exe
0012 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0013 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0014 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0015 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.181.34 2011-07-13+21-05-27.375 ========
=O====== M/10.3.183.7 2011-08-25+19-36-38.796 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0002 [W] 00001036 Software\Opera Software/Last CommandLine 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Plugin Path 2
0005 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_Plugin.exe
0007 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.7 2011-08-25+19-36-39.515 ========
=O====== M/10.3.183.7 2011-08-25+19-40-17.046 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0002 [W] 00001036 Software\Opera Software/Last CommandLine 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Plugin Path 2
0005 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_Plugin.exe
0007 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.7 2011-08-25+19-40-17.984 ========
=O====== M/10.3.183.7 2011-08-26+13-50-26.343 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax.exe" -dlm -install
0001 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10u.ocx 20
0002 [I] 00000018
0003 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10u.ocx 20
0004 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10w.ocx
0005 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_ActiveX.exe
0006 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_ActiveX.dll
0007 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0008 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.7 2011-08-26+13-50-28.031 ========
=O====== M/10.3.183.7 2011-08-26+14-06-06.312 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [F] 00001041
=X====== M/10.3.183.7 2011-08-26+14-06-06.453 ========
=O====== M/10.3.183.7 2011-08-26+14-06-14.234 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player.exe" -dlm -install
0001 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0002 [W] 00001036 Software\Opera Software/Last CommandLine 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Plugin Path 2
0005 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_Plugin.exe
0007 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.7 2011-08-26+14-06-15.093 ========
=O====== M/10.3.183.7 2011-09-27+18-59-10.859 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil10w_Plugin.exe" -update plugin
0001 [I] 00000011 0
=X====== M/10.3.183.7 2011-09-27+18-59-27.046 ========
=O====== M/10.3.183.10 2011-09-27+18-59-27.046 ========
0000 [I] 00000010 "C:\DOCUME~1\bailey\LOCALS~1\Temp\2.dir\InstallFlashPlayer.exe" -iv 0
0001 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0002 [W] 00001036 Software\Opera Software/Last CommandLine 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Plugin Path 2
0005 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10x_Plugin.exe
0007 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.10 2011-09-27+18-59-38.171 ========
=O====== M/10.3.183.10 2011-09-29+15-59-32.265 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax.exe" -dlm -install
0001 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10w.ocx 20
0002 [I] 00000018
0003 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10w.ocx 20
0004 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10x.ocx
0005 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10x_ActiveX.exe
0006 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10x_ActiveX.dll
0007 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0008 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/10.3.183.10 2011-09-29+15-59-33.625 ========
=O====== M/11.0.1.152 2011-10-25+14-04-09.890 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -dlm -install
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/11.0 2
0002 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0003 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10x.ocx 20
0004 [I] 00000018
0005 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10x.ocx 20
0006 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx
0007 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11c_ActiveX.exe
0008 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11c_ActiveX.dll
0009 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.0.1.152 2011-10-25+14-04-11.593 ========
=O====== M/11.0.1.152 2011-10-25+14-21-57.484 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -dlm -install
0001 [F] 00001041
=X====== M/11.0.1.152 2011-10-25+14-21-57.656 ========
=O====== M/11.0.1.152 2011-10-25+14-22-02.296 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -dlm -install
0001 [F] 00001041
=X====== M/11.0.1.152 2011-10-25+14-22-02.906 ========
=O====== M/11.0.1.152 2011-10-25+14-22-04.625 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -dlm -install
0001 [F] 00001041
=X====== M/11.0.1.152 2011-10-25+14-22-04.750 ========
=O====== M/11.0.1.152 2011-10-25+14-23-59.843 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -dlm -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Last CommandLine 2
0005 [W] 00001036 Software\Opera Software/Plugin Path 2
0006 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0007 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11c_Plugin.exe
0008 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0009 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.0.1.152 2011-10-25+14-24-01.046 ========
=O====== M/11.0.1.152 2011-10-25+14-26-08.859 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -dlm -install
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/11.0 2
0002 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0003 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10x.ocx 20
0004 [I] 00000018
0005 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash10x.ocx 20
0006 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx
0007 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11c_ActiveX.exe
0008 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11c_ActiveX.dll
0009 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.0.1.152 2011-10-25+14-26-10.718 ========
=O====== M/11.1.102.55 2011-11-15+15-10-52.421 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -dlm -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx 20
0003 [I] 00000018
0004 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx 20
0005 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11e.ocx
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.exe
0007 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.dll
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.55 2011-11-15+15-10-54.250 ========
=O====== M/11.1.102.55 2011-11-15+15-39-15.656 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -dlm -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx 20
0003 [I] 00000018
0004 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11c.ocx 20
0005 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11e.ocx
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.exe
0007 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.dll
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.55 2011-11-15+15-39-17.703 ========
=O====== M/11.1.102.55 2011-11-16+14-51-49.281 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -dlm -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Opera Software/Last CommandLine 2
0004 [W] 00001036 Software\Opera Software/Last CommandLine 2
0005 [W] 00001036 Software\Opera Software/Plugin Path 2
0006 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0007 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_Plugin.exe
0008 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0009 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0010 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.55 2011-11-16+14-51-50.312 ========
=O====== M/11.1.102.55 2011-11-16+15-17-42.843 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\install_flash_player_11_active_x_32bit.exe"
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11e.ocx
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.exe
0004 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11e_ActiveX.dll
0005 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0006 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.55 2011-11-16+15-17-52.640 ========
=O====== M/11.1.102.63 2012-03-17+14-15-18.406 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -dlm -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11e.ocx 20
0003 [I] 00000018
0004 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11e.ocx 20
0005 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash11g.ocx
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11g_ActiveX.exe
0007 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11g_ActiveX.dll
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.63 2012-03-17+14-15-20.968 ========
=O====== M/11.1.102.63 2012-03-17+14-20-08.000 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\My Documents\Downloads\install_flash_player_11_plugin_32bit.exe"
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0004 [W] 00001036 Software\Opera Software/Last CommandLine 2
0005 [W] 00001036 Software\Opera Software/Last CommandLine 2
0006 [W] 00001036 Software\Opera Software/Plugin Path 2
0007 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32.dll
0008 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil11g_Plugin.exe
0009 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0010 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0011 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
=X====== M/11.1.102.63 2012-03-17+14-20-18.671 ========
=O====== M/11.1.102.63 2012-04-30+14-56-01.171 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil11g_Plugin.exe" -update plugin
=X====== M/11.1.102.63 2012-04-30+14-56-33.828 ========
=O====== M/11.2.202.233 2012-05-01+13-59-33.765 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_ActiveX.exe" -refreshIEElevationPolicies
=X====== M/11.2.202.233 2012-05-01+13-59-33.937 ========
=O====== M/11.2.202.233 2012-05-01+13-59-33.765 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_ActiveX.exe" -refreshIEElevationPolicies
=X====== M/11.2.202.233 2012-05-01+13-59-33.984 ========
=O====== M/11.2.202.233 2012-05-01+13-59-31.359 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_ax_32bit.exe" -iv 8 -install -au 0
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11g.ocx 20
0003 [I] 00000018
0004 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\Flash11g.ocx 20
0005 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash32_11_2_202_233.ocx
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_ActiveX.exe
0007 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_ActiveX.dll
0008 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0009 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
0010 [I] 00000021 C:\WINDOWS\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0011 [W] 00001102
0012 [W] 00001106
0013 [I] 00000012
=X====== M/11.2.202.233 2012-05-01+13-59-34.187 ========
=O====== M/11.2.202.233 2012-05-01+14-06-09.343 ========
0000 [I] 00000010 "C:\Documents and Settings\Howard\Local Settings\Temp\install_flash_player_32bit.exe" -iv 8 -install
0001 [I] 00000020 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0004 [W] 00001036 Software\Opera Software/Last CommandLine 2
0005 [W] 00001036 Software\Opera Software/Last CommandLine 2
0006 [W] 00001036 Software\Opera Software/Plugin Path 2
0007 [I] 00000014 C:\WINDOWS\system32\Macromed\Flash\NPSWF32_11_2_202_233.dll
0008 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_Plugin.exe
0009 [I] 00000017 C:\WINDOWS\system32\Macromed\Flash
0010 [I] 00000019 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl
0011 [W] 00001024 C:\WINDOWS\system32\FlashPlayerCPLApp.cpl 183
0012 [W] 00001024 C:\WINDOWS\system32\FlashPlayerApp.exe 183
0013 [I] 00000021 C:\WINDOWS\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0014 [W] 00001106
0015 [W] 00001106
0016 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashPlayerUpdateService.exe 183
0017 [I] 00000012
=X====== M/11.2.202.233 2012-05-01+14-06-10.796 ========
=O====== M/11.2.202.233 2012-05-02+14-04-07.671 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil32_11_2_202_233_Plugin.exe"
0001 [E] 00001039
=X====== M/11.2.202.233 2012-05-02+14-04-12.890 ======== -
XML Parsing. Just need some guidance.
Hi,
This is my project. I need to be able to read in XML code in my java program and then do necessary tasks such as updating my oracle database with the values. I heard and looked at the java API for that but Im not so sure xml parsing is the correct words that I should be using. Does anyone know of a way to do this or at least somewhere that I could go look for an example.
Thanks in advance.Hi!
What you are looking for is either SAX (Simple API for XML) or DOM (Document Object Model).
Look here for a SAX-Tutorial:
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/
There are also several dom-tuts to find in the internet.
Good luck! -
Just need some simple stats :)
I've been using Microsoft's "Excel Lite" program for a few years. I don't even know what it's called, but its performance is more limited than Excel, which I've never used.
I've never used a mathematical formula in a spreadsheet. All I do is insert data, which I organize an save as a CSV file, which I then import into a database table. For example, I have a spreadsheet with information on the animal kingdom, arranged by class, order, family, genus and species, all coded by cell background color/pattern and various font styles.
To get to the point, there are two features I've grown to love that I have not found in any other spreadsheet, and I'd like to ask how Numbers compares...
1) Sortable columns - In "Excel Lite," you can sort as many as three columns at a time. If you highlight cells spanning twelve rows, you can sort by one, two or three columns, even if you've only highlighted a single column. You can also sort an entire column (or two or three columns) by simply highlighting an entire column. I discovered that you cannot do this in OpenOffice.org's spreadsheet. I forget the details, but it was clumsy to work with.
So how efficient is Numbers' sort feature? Can it sort three columns or just one? If I want to sort every row in a column(s), can I do so by simply highlighting the column, or do I have to specifically highlight every cell in each row and column I want to sort?
This is the single most important feature I'm looking for.
2) Cell/Font Attributes - OpenOffice.org's spreadsheet has a respectable number of cell background colors to choose from, but I like Excel's approach better. M$ allows you to choose various shades of each color, combine colors to create new colors and also choose background patterns, such as horizontal, vertical or diagonal lines. What scheme does Numbers use?
Here are a few more questions...
How many rows of data can you have in a Numbers spreadsheet? (I think my spreadsheet programs allows about 16,000, while I believe Excel allows 65,000.)
How much text can you insert in a cell? Unfortunately, I can't use my spreadsheet program for storing articles, because each cell will only accept the equivalent of one or two medium paragraphs. I don't expect any other spreadsheet to do better...I'm just wondering if Numbers does allow you to paste entire articles into cells.
I'm fascinated to hear that you can paste images into a Numbers document. Right now I'm organizing images I use on my websites into a spreadsheet, with separate columns for each image's ID, caption, text for the ALT tag, etc. It woul be nice if I could actually see a thumbnail of each image next to its ID and description, sort of like connecting a name with a face. Can you really do that? I would think the file size would be enormous if you were working with hundreds of images.
I assume you can save a Numbers document as a CSV file...right? Is there also a feature that allows you to publish a spreadsheets' content directly into a MySQL database table? (I understand OpenOffice.org has such a feature, though I've never tried it.)
Sorry for the long post. Any feedback on any particular question would be welcome. I HATE everything Microsoft, and I'm not even using Parallels on my MacBook Pro. The only M$ software program I covet is Excel, so I was elated to discover that there may be a worthy competitor out there.
Thanks.Sorry, I didn't realize there was a free trial version. I just downloaded it, and my first impressions are WOW!
The sort feature is better than the sort feature on "Excel Lite." Just click "Sort and Filter" to bring up the little Sort dialog box. At first, it looks like you can only sort a single column. But clicking the little plus sign on the right opens additional columns. I don't know what the limit is, but it's certainly far more than three.
I also verified that you can paste very large amounts of text in a cell.
Unlike M$'s spreadsheet, there are no cell background patterns, but there are plenty of colors to choose from. Also, it appears that there are far more options for styling text.
I've only worked with it for a few minutes, but, for my purposes, Numbers rocks! -
I just need some drivers, READ
I have an Audigy 2 ZS and I have a Athlon 64 3200+, so I got the BETA Microsoft XP x86 Professinal, which is 64 bit, Im sure you have heard this before. So blah blah blah blah.....
I want a link to some drivers that will work with this system... and maybe some tips on installing them because here recently, i have installed some extremly 'messy' drivers.
Thank you very much Admins and Moderators, you make our computer experience so much better.
-MidgetSmith<EM>Looks like other people are having the same problems, http://preview.creativelabs.com/List...llItems%2Easpx</EM>
<EM></EM>
<EM>But where in the bleep does it provide a fix? </EM>
<EM></EM>
<EM>By the way, thats the same error message i get when i try to install:</EM>
<EM></EM>
<EM>This application has failed to start because ctosuser.dll was not found. Re-installing the application may fix this problem.</EM>
<EM></EM>
<EM></EM>
<EM></EM>
<EM></EM> -
I figured I'd give this one last shot before I try mailing my iPod off for repairs.
So my iPod locked up one day. It's happened before, so I try restarting it. The Apple logo appeared, but then told me to go to the support website.
I tried hooking it up to both an AC and USB 2 port to charge it enough for my computer to recognize it (PC/WinXP).
The charging battery icon came on, but it would never charge enough for it to be recognized.
I've tried everything on the support page, so it just seems to me that the battery is too far gone.
Any other ideas?Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. BTW, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Maybe you are looking for
-
Will my 3GS work in BOTH north and south Ireland?
It is unlocked and was purchased in the USA. Will it have a problem charging since it is a different voltage over there?
-
HT1222 my ipod reads error when trying to sync with itunes
my ipod reads error when trying to sync to my itunes
-
I have found a site selling cheap Kingston memory in single sticks, if I install 2 or 4, will they still run in dual channel or do I need to buy a kit marked dual channel?
-
Revision: 11601 Author: [email protected] Date: 2009-11-09 22:00:50 -0800 (Mon, 09 Nov 2009) Log Message: Integrating Min's recent fixes to FXGUtils for a group of attribute parsing bugs and clarification of error messages. QE notes: Please co
-
Hi all! When we make a return to stock from delivery in "Return to Stock", with TO item View, the material returns to its original position. We need that the material always go to its picking position. I need to know if there is an EXIT at TO cancell