Just Not Having Any Luck With E-Mail Address, ect.
Kuduo,
First off thank you so much for just doing this!!! I have been dealing with the company, and it's a nightmare!
I am still getting nowhere as far a establishing a e-mail address for the e- what ever it's called on my printer.
I have a new hp photosmart all in one D 110 A, and I finally did get it to work without using a usb cable, even
if the print out tells me that I should change it as I caould have others use, see my things. I do use my wire-
less computer(laptop) to obtain a connection, and get a very good one from some new neighbor. I do not
want to chage it, and the report at one point even said it was "critical"
I have printed out several time the things it tells you to, but have yet to see any e-mail address???!!! So just
what is the scoope on this anyway?
I do know that it took me forever , and also alone to even figure out how to use my printer without the usb cord,
and for now she is working fine.
The one problem is that it does start to print off the wall, and also I hace change the settings 10 times from
color to black, but it only goes back to prihting COLOR!!!!!
Thanks For Your Help In Advance
Debbie
Enable Web Services from the front of the printer.
What operating system are you using and I can give you a hint about the color/black thing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
Just not having any fun with my Xpower
So since I fixed the PC a week or so ago I've been having a constant and consistent boot issue. Every time I turn the PC on, and it is EVERY time, windows will freeze on loading (win7 64bit). My reset button WILL NOT work and I have to hold either power or reset button for 4 seconds to shut down the PC. Now instead of it actually turning the PC off it will power right back on and windows loads fine. If I restart from within Win7 via shutdown / restart it will reboot just fine.
Idead welcome.Believe me, if I had any clue, it would certainly get posted. The only thing that comes to mind is something in the system seems to need to get 'warmed up' first. Power regulation problem? Try with a different keyboard & mouse? May be best to stay with one stick in the primary black slot till this can be resolved. That will keep things as basic RAM wise as possible. I just did a test of some Crucial on my board & 'very' impressed. This was a first break from using nothing but Corsairs exclusively. Both tests are with only 1.50V's being required.
-
I am not having any luck trying to create a brochure with ID in CC
I am not having any luck trying to create a brochure with ID in CC. i thought i remembered it to be something you can use in Bridge also. Can't seem to find that either.
anyone have any help they can offer?If you're starting from scratch learning InDesign, know that it's difficult to learn just by asking a few questions. You'll do much better either by buying an excellent, inexpensive book by Sandee Cohen:
InDesign CC: Visual QuickStart Guide
Or by watching some videos on www.Lynda.com. Here's the best introduction:
InDesign CC Essential Training -
I'm not having any trouble with the iPhone, but the iPad is a different story. It pairs
I'm not having any trouble with the iPhone, but the iPad is a different story. It pairs & syncs but hardly any sound or volume comes out of the Bose. Yes, the volume is turned up, it is synced & paired, but almost a whisper comes out. Anyone have any ideas? I assume it's the iPad since the phone works fine.... Help!
Thanks. We went to Best Buy, where we bought our phones and altho we thought we were "seeding" the ear buds far enough, we were not. There's that extra little "click" and they were in! So, they work well enough for our old ears. But, thanks for your input!
-
Recording vinyl with Audacity - not having any luck
I'm trying to record my vinyl collection using audacity and not having much luck. I've got the line in and can get the red recording cursor moving but no waveform appears. I have followed the info on the wiki but I cannot get any further.
The wiki is all over the place with info. Does anyone have an idiots guide?
thanksOne of the issues 'glossed over' in the article is that a Mac expects to see a line-level input and many turntables (like mine) need a small pre-amplifier )like this one http://www.radioshack.com/product/index.jsp?productId=2541471&cp=&sr=1&origkw=li nelevel&kw=linelevel&parentPage=search ) to furnish the proper audio level.
It sounds like this the the original poster's problem.
Another approach is to use the line-level output from your audio amplifier (if you still have one) because the audio amp should have the phono pre-amp built-in. -
Trying to clean install Leopard 10.5.6 and not having any luck!
I recently received a Powerbook G4 15 inch from a friend of the family without any OS installed on it. I was told by the tech's at the Apple Store that it would take Leopard OS so I purchased Leopard 10.5.6 and now I'm trying to install the software and I am continually getting multiple errors while trying to install.
So my question is:
Is Leopard 10.5.6 compatible with my Powerbook G4 15 inch and if it isn't can someone PLEASE tell me which OS is compatible with my Powerbook? Thanks in advance!I just did this on a 1.67ghz PBG4 with a replaced HD so I know it can be done. As Neil said, if you have a retail copy it should load fine. If you have an original disk that shipped with a machine (Gray Disks) then it will not work. Maybe you should check with the person who gave you the machine to see if they were having any problems. OR, find out if they have the original gray Apple install discs so you can at least run a hardware test.
Good Luck! -
When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
I have an iMac and cannot access my office computer running Windows Small Business Server 2008 through Remote Desktop. Any ideas?
Hi, do you know it's IP? Can you ping that?
Might give a try with the free
logmeIn...
https://secure.logmein.com/products/pro/register.aspx -
HT1014 Not having much luck with this iMac!
can not import my photos from pc(via migration) and have given up on that, now found my camcorder is not compatable with iMovie, does anyone know of another movie type app that might work for an incompatible camcorder ? Camcorder is sonydcr hc14e. Grrrr, thought it would be plain sailing with i-mac!
This camera works on Macs. It is a standard definition DV tape camera. However, you need a Firewire port. Not all Macs have a Firewire port, but most iMacs do. Some of the laptops do not.
Check to see if you have a Firewire port on your Mac. You can click /About This Mac/More Info/System Report to tell for sure.
If you have a Firewire 400 port, you need a 4 pin to 6 pin Firewire cable.
If you have a Firewire 800 port, you need a 4 pin to 9 pin Firewire cable.
Your Sony camera will have an IEEE 1394 port. This is what Sony calls Firewire and this is where you use the 4 pin end of the cable.
Firewire cables are available inexpensively here.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Some recents Macs only have a Thunderbolt port. There are Thunderbolt to Firewire adaptors available, but I have not tried them.
To import from this camera, attach it via Firewire Cable. Set the mode to Playback. Camera must be plugged in to AC power (not batteries only.) Use FILE/IMPORT FROM CAMERA. -
I have an Epson Nx 420/printer/scanner, and I keep getting a message that says there is a communication error. Check the connection [W-61}. I have the snow leopard operating system Mac OS X 10.6.8 I want to scan my pictures into iphoto. Can someone please tell me what I am doing wrong. Thankyou.
Make sure you have updated all of your scanner drivers. Check Software update and check with Epson tech support.
Not sure if the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers deal with scanners. Read the info on their website.
Check Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions for scanner troubleshooting. Especially if you have an all in one. -
I'm trying to wirelessly print to my samsung printer. I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print. Anyone have any ideas?
You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.
-
Anyone else having any luck with Sony raw files and the Raw 3.8 Compatibility fix?
Tried importing my raw photos from my Sony Nex-5N. Supposed to work with the Nex-C3 which should be the same. Have to use Lightroom instead of Aperture - would prefer Aperture.
I'm not sure as you have some extra letters on the cameras you cite, but Aperture 3 should support the Sony Alpha NEX-5, not sure about the 5N.
When you do import, what happens? When you plug in your camera (how are you importing) and hit the import button, what happens next?
More information the better for us to try and help troubleshoot the issue. -
I have downloaded a wedding video done on my iPad and put it in iMovie on my MAC. Have spent many hours refining it and now want to burn onto DVDs for other family.
When I did this same thing 4 years ago, I had one-to-one help at apple store and saved the video in M4V format and it was not a problem to share the video.
Now this video is in Mp4 and I need it in M4V - that is what the burning devise tells me.
I downloaded a video converter, but it didn't seem to make the coversion.
IDEAS?Have you tried this -> https://itunes.apple.com/us/app/free-mp4-converter/id693443591?mt=12?
It's free at the Mac App Store...
Clinton -
I am trying to authorize my computer and am not having any luck
I am trying to authorize my computer to download some apps and it tells me to go to the apple store and go to authorize my computer and I do it and i am getting nowhere. Does anyone have any solution to this problem??
Have a look here http://support.apple.com/kb/TS1389
And Here About authorization and deauthorization -
Videos qit working on my computer. It was suggested to update Adobe. I have saved it and ran it but nothing happens. How do I get it back working. Not very good when things dont go right. Have looked at your help pages and nothing has helped. Thanks.
I think that means your Flash player is installed and working. But why not on popular sites? Hmmm... to see whether an add-on is at fault, you could try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, close Firefox, hold the Shift key, and restart Firefox in
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does YouTube work in Safe Mode? If so, a conflicting add-on is the most likely culprit.
Maybe you are looking for
-
Trying to use my Time Capsule as a Hard Drive.. Help!!
I have recenly inherited an old Time Capsule from a family member and I've been trying to figure out for two hours how to use it as an external hard drive. I connected it and added it to my existing network as an extention. Then, I turned off its wir
-
How to set Flash CS3 "custom" classspath
Hello Flash Forum, I am following a tutorial on how to create a class. this class requires a package like: todd.interactive (a tutorlal from Lynda.com) I have created my on dir where I keep fla files: D:\Flash\, and then have created the following di
-
Trying to start dbconsole and getting system error 5
Hello, I am trying to launch the db console and it denie access saying 'System Error 5 has occured" Do anyone know what this means? Thanks, Peter
-
Hi, I want the document numbers to be generated with combinations of numerical , alphabet etc.. Where can I configure this in case of PLM module.
-
When I import files in Elements 6, 5 strrs are automatically generated. How do I make the import no stars?