Just not working...please help...
Hey guys,
I just can't get ARD to work. I'm sitting in an office with 2 networks and 2 computers, 1 on each network so I can run tests.
I have a Time Capsule. On the AirPort utility overview the IP address is 192.168.11.0.
Under Port Mapping I've added ARD and it has a Private IP Address: 192.168.11.200.
If I go to Manual setup of AirPort my IP address is 208.105.6.209.
Using the Time Capsule network ARD works fine. The computer I want to log onto has websharing turned on, the website is 192.168.11.1.
So how can I connect to 192.168.11.1 from another wireless network? No matter what I do it doesn't work and I think I have everything set up fine.
Thanks so much for any and all help. It's desperately needed.
Best,
Rob
I just need to know which of these numbers or what combination of them should be used when I'm trying to login from a remote computer...I can't figure it out.
Any and all help would be appreciated.
Thanks,
R.
Similar Messages
-
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
Hp DV6 TouchPad Lock Button Not Working Please Help.?
I just bought my hp dv6 6c4se entertainment notebook. but the touchpad on and off button is not working.please help.yes there is a little white sqaure in the left up corner of the touchpad.but it doesnt work.please help somebody
Try a Hard Reset to gently "kick" that TouchPad back into operation.
HP Notebook PCs - Use a Forced Reset to Resolve Hardware and Software Issues on Notebook with a Seal...
Removable Battery:
HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
Kind Regards,
Dragon-Fur -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
Maybe you are looking for
-
Hi Experts, I have successfully installed Crystal report add-on on SAP B1 server, I can see the attached report in all modules on server as well as client machine, but when i tried to open any report on client machine, it is not opening but it is pro
-
I need full screen video to automagically reduce back to the page when the video is done.
Possible? I want to use the "Full-screen only" option in the media widget, but when the video reaches the end it drops to a black frame and just sits there. I need it to realize the video is over and shrink back down to the widget in the page. Simil
-
Invalid sibling link, I/O error
This has been a persistent problem w/ my eMac. It took about a year from purchase until the system would not boot. Disc Warrior gets it up, but the fix doesn't last. I've done 'Archive' or 'Erase and Install' dozens of times and now the error reappea
-
Hi I need help regarding use of FM PRICING. My requirement is to calculate repricing for sales document using FM PRICING what is procedure to get exporting parameters in fm pricing What are parameters to be passed in structures komk and komp for repr
-
I think I didn't explain myself very well earlier but always am grateful for responses. On a Windows 8 - 64 bit, I have CS 5.1 & Lr 4.4 with ACR 6.7. I have auto updates checked in Adobe App Manager but it has always said I am up to date on everythin