Just one time use?

Can I convert a Word Document into PDF without buying the yearly package. I just want to do it one time?

Hi dianna50,
If you did decide to purchase a subscription to PDF Pack and give it a go, you are able to cancel within 30 days and get your money back. Adobe also offers a free 30-day trial to Acrobat, which not only lets you create PDF files, but edit them as well.
If you decide to give it a try and need help with anything, please let us know.
Best,
Sara

Similar Messages

Excecute a planning sequence when open Web Template (JUST ONE TIME)

Hello experts,
I want to excecute a planning sequence everytime when a webtemplate is opened.
I use the "Action before first display" for this. The problem is, that the planning sequence is excecuted multiple times when I open the web template. The web template contains several queries. Could it be that the planning sequence is started for every query?
If yes is there a way to suppress this? I want to run the planning sequence just one time for the whole web template
Thanks
Johannes

Yes I tried in action before rendering it is the same behaviour with the difference that the sequence is also executed after clicking on a button with another planning sequence. Action before first display is excactly what I need but I want to run the sequence just one time when the web template is loaded and not for every query. We don't use tabs at all.
Thanks
Johannes

Can I restore just one app. using the Install disc, or must all items be restored?

Can I selectively restore just one app. using the Install disc, or will all items be automatically restored?

Thanks BDAqua;
This is my first time using the forums, so I am not certain about protocol. However, your quick reply is appreciated.
miltc
BDAqua wrote:
Hi , and a warm welcome to the forums!
Get Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use.

Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use. I don't have the app on my computer and I simply wish to have it on there to actually be able to transfer my files.

You can transfer the app to your PC to save it, the article below will show you how:
iTunes Store: Transferring purchases from your iOS device

Doing loop just one time

hi max
i have loop for tmp_emp_day and i wont to do the loop target_hours_exp just one time (fill cnt_days just one time) in all the big loop (tmp_emp_day) how i do that?
LOOP AT tmp_emp_day ASSIGNING <fs_emp>.
CALL FUNCTION 'Z_EMP_CAP'
EXPORTING
pernr = <fs_emp>-pernr
begda = fir_day
endda = last_day
IMPORTING
target_hrs = target_hrs
TABLES
target_hours_exp = target_hours_exp
work_hours = work_hours.
<b>LOOP AT target_hours_exp ASSIGNING <target_hours_exp> WHERE stdaz = '0.5' .
ADD 1 TO cnt_days.
ENDLOOP.</b>
<fs_emp>-miss_days = <fs_emp>-miss_days - cnt_days.
APPEND <fs_emp> TO emp_miss_days.
ENDLOOP.
Regards

try
LOOP AT tmp_emp_day ASSIGNING <fs_emp>.
CALL FUNCTION 'Z_EMP_CAP'
EXPORTING
pernr = <fs_emp>-pernr
begda = fir_day
endda = last_day
IMPORTING
target_hrs = target_hrs
TABLES
target_hours_exp = target_hours_exp
work_hours = work_hours.
if sy-tabix = 1.
LOOP AT target_hours_exp ASSIGNING <target_hours_exp> WHERE stdaz = '0.5' .
ADD 1 TO cnt_days.
ENDLOOP.
endif.
plz reward points if it helps

One time use.

I very seldom use, if any, acrobat for editing, changing from pdf to word, but there comes a time when I need to edit and change words, correct misplelled words, delete words or pharses. Is there a fee for one time use instead of having to pay for the whole year? If if I do pay for the year can I get the package for 1.99/mo. that covers all of the above?

Hi serolf industries,
You can use the trial version of Adobe Acrobat XI that comes with full functionality and is valid for 30 days. However, once the 30 days are over then you need to purchase Adobe Acrobat to use it further. For more information, please refer to the link mentioned below:
For more information on Acrobat XI: http://www.adobe.com/products/acrobat.html?promoid=JOLIR
To download Free Trial of Adobe Acrobat XI: https://www.acrobat.com/free-trial-download.html

One Time use Promo code

Hi,
Does SAP provide a functionality for one time use promo code? Basically the customer should able to login to the web shop and use the promo code only once. If they use it for the second time, then the system should not allow it. Any suggestions are welcome.
I am not looking for the coupon code functionality.
Thanks
Ash

Thanks for your suggestion. I am trying to avoid custom solutions.
I was looking for standard SAP Marketing functionality for one time use campaign codes (promo codes). Promo codes are same as campaign ID. Target groups can be assigned to a campaign and consumers in that target group can use the promo code. However once a consumer has used a campaign code, they should not be able to use it again in another order/shopping cart.
Edited by: Ashish Saxena on Jan 13, 2011 8:53 AM

We have two iphones, a ipad 2 and ipad mini The iphones have no difficulty discovering our air printers. the ipads cannot find printers unless they are switched off/on and then only one time use

We have two iphones, an ipad2 and ipad mini. The iphones have no difficulity discovering the air printers on our network. However the ipads cannot locate air printers. If the ipads are switched off/on they can find the printers but only for a one time use. Then they can no longer find printers. Any suggestions?

You are most welcome

Are promo codes one-time use?

I suspect I already know the answer to this, but there's nothing like having the actual facts. I've searched quite a bit and (unless I'm missing something obvious) no where can I find a statement that says "one promo code = one download."
Can I provide a single promo code to a group of people so they can all download a free copy of an iBook?

Thanks for your suggestion. I am trying to avoid custom solutions.
I was looking for standard SAP Marketing functionality for one time use campaign codes (promo codes). Promo codes are same as campaign ID. Target groups can be assigned to a campaign and consumers in that target group can use the promo code. However once a consumer has used a campaign code, they should not be able to use it again in another order/shopping cart.
Edited by: Ashish Saxena on Jan 13, 2011 8:53 AM

Software "One Time Use"

Maybe this has already been posted, but I didn't find it. I've got a brand new Nano, but my home computer is broken right now. Can I install the software on a different computer, then transfer it to my home computer? I'm the same user... or does "one time use" mean strictly that? I know I sound naive, but I'm so afraid to waste my installation!!

you can install it on another one of your machines

I just bought a used XP Home Edition program that has been installed before. Will I be able to install this again on my computer or is it only a one time use software? I have the Product Key and CD.

I just bought a used XP Home Edition software program that has been installed before. I have the Product Key and installation disc. Will I be able to install it on my own computer? Or, is this software (purchased retail) a one time install? Please advise.

Depends on many things.
If your system is Lion, XP can only be installed under VM. BootCamp in Lion only accepts Windows 7.
As to "one use only", if you are referring to OEM ...
A reinstall can trigger the OS to "not register" because "a major component serial number or MAC (the network MAC chip) address" has changed, according to MS databases.
But you can call MS to get the key reactivated, usually/sometimes. It is worth a try, at least, before spending money on another Windows 7 package. But this discussion should end *now* at "maybe" as it treads close to matters that forum Terms-of-Use would prefer we not discuss.

How do I read multiple channels at one time using labview with the Fluke Hydra Data Bucket 2620a using serial port?

I need to take a reading of 15 channels about once a second. I can read one value at a time using the monitor function on the read values.vi driver, but this takes forever to read all the channels.

I don't have this instrument but I took a look at the instrument driver and it appears that you can only configure one channel at a time to read from. You might want to take a look at the command set for this instrument and see if it allows for configuration of multiple channels. It could be that the instrument driver just doesn't have that built in.
J.R. Allen

Itunes 8 only good for one time use after each installation!

When I attempt to open itunes I get a pop-up window that says "Please wait while windows configures itunes". This window has a download bar and cancel button in it. Then a second window appears that says "You must restart your system for the configuration changes made to itunes to take effect Click Yes to restart now or No if you plan to manually restart later." Ok, when I click yes my system restarts then when I attempt to click into itunes again after restart I still get the same pop-up windows. I have un-installed and re-installed itunes 3 times. It works fine right after installation. However, when I click out of itunes then try to go back in it the same pop-up windows appear! This happens everytime I re-install! I can only use itunes one time per installation??!! I don't know what to do please help!!

Thanks for this. I had this same problem and was wondering what was going on. My new issue is that itunes 8 just turns off on its own after like 30 seconds - but I wonder if it's because my work computer may not allow iTunes?

Send APDU just one time

My application (in delphi) send Name(string), Family(string), And children (array of string)...
then These data will convert into Hex format and will be sent to CAD via APDU...
My question is how can I send all of these data at once via on APDU command, should I send Name and Family one by one and also send every index in my array one by one ??
I wrote an applet which has a SetName, Set Family and SetChildren Methods and once call SetName and send Name via one APDU, then call SetFamily and send Family via other APDU, and the big problem is in array that I'm sending each index data of array via one APDU...
I'm sure it's a foolish way and there's a better way to send these data :)
would u please help me and guid me what can I do, this is so much urgent
Kind Regards
Hana

Zip_Smart_Girl wrote:
first a question about your last reply:
I add this code in my applet process method, so what can i send from JCOP, can I now send Lc in 2 bytes ??The card you have is Java Card 2.2.1 which does not support extended length APDU's. As such your only choice is to implement chaining. This is also the reason why your code does not compile in Eclipse. You are building against the JC2.2.1 libraries.
Here is some code that may help you get started. This code is not tested (apart from the fact it compiles) as I am not at work at the moment. This code comes with all the standard disclaimers and may not be fit for purpose... so use at your own risk :) There is still more validation that could go in (such as checking that the GET-RESPONSE command has the same CLA byte etc). Hopefully this code works and gets you started with command and response chaining. This may also help anyone else that needs to do something similar. If this can help just one person I will be happy.
Cheers,
Shane
package chaining;
import javacard.framework.APDU;
import javacard.framework.Applet;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.JCSystem;
import javacard.framework.Util;
* Very simple applet for chaining data to and from a card.
* @author shane
public class ChainingApplet extends Applet {
    private final static byte INS_GET_RESPONSE = (byte) 0xC0;
    private final static byte INS_PUT_DATA = 0x00;
    private final static byte INS_GET_DATA = 0x01;
    private final static byte OFFSET_SENT = 0x00;
    private final static byte OFFSET_RECV = 0x01;
    private static short[] offset;
    private static byte[] fileBuffer;
    private static short fileSize = 0;
    private final static short FILE_SIZE = 2048; // 2KB file
    private final static short MAX_APDU = 255;
     * Default constructor that initialises all memory to be used by the applet.
    public ChainingApplet() {
        offset = JCSystem.makeTransientShortArray((short) 2, JCSystem.CLEAR_ON_RESET);
        fileBuffer = new byte[FILE_SIZE];
     * {@inheritDoc}
    public static void install(byte[] bArray, short bOffset, byte bLength) {
        // GP-compliant JavaCard applet registration
        new ChainingApplet().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
     * {@inheritDoc}
    public void process(APDU apdu) {
        // Good practice: Return 9000 on SELECT
        if (selectingApplet()) {
            return;
        short len = apdu.setIncomingAndReceive(); // This is the amount of data read from the OS.
        byte[] buf = apdu.getBuffer();
        byte cla = buf[ISO7816.OFFSET_CLA];
        byte ins = buf[ISO7816.OFFSET_INS];
        short lc = (short) (buf[ISO7816.OFFSET_LC] & 0x00ff); // this is the LC from the APDU.
        // get all bytes from the buffer
        while (len < lc) {
            len += apdu.receiveBytes(len);
        // validate the INS byte (basic check that tests for valid GET-RESPONSE or GET-DATA)
        if (offset[OFFSET_SENT] > 0 && ins != INS_GET_RESPONSE) {
            ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
        } else if (ins == INS_GET_RESPONSE && offset[OFFSET_SENT] == 0) {
            ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
        switch (buf[ISO7816.OFFSET_INS]) {
            case INS_PUT_DATA:
                saveData(buf, ISO7816.OFFSET_CDATA, offset[OFFSET_RECV], len);
                if ((cla & 0x10) != 0x00) {
                    offset[OFFSET_RECV] += len;
                } else {
                    // last command in the chain
                    fileSize = (short) (offset[OFFSET_RECV] + len);
                    offset[OFFSET_RECV] = 0;
                break;
            case INS_GET_DATA:
            case INS_GET_RESPONSE:
                sendData(apdu);
                break;
            default:
                // good practice: If you don't know the INStruction, say so:
                ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
     * Simple method to save the data somewhere. Add real implementation here.
     * @param source
     *            buffer containing data to copy
     * @param sourceOff
     *            offset into source buffer to the data
     * @param destOff
     *            offset into the destination buffer
     * @param len
     *            length of the data to copy.
    private static void saveData(byte[] source, short sourceOff, short destOff, short len) {
        // prevent buffer overflow
        if ((short) (destOff + len) > FILE_SIZE) {
            ISOException.throwIt(ISO7816.SW_FILE_FULL);
        Util.arrayCopy(source, sourceOff, fileBuffer, destOff, len);
     * Simple method to send chainined data to the client application (if required).
     * @param apdu
     *            current APDU
    private void sendData(APDU apdu) {
        // work out how many bytes to send this time and how many will be left
        short remain = (short) (fileSize - offset[OFFSET_SENT]);
        boolean chain = remain > MAX_APDU;
        short sendLen = chain ? MAX_APDU : remain;
        // Get ready to send
        apdu.setOutgoing();
        apdu.setOutgoingLength(sendLen);
        apdu.sendBytesLong(fileBuffer, offset[OFFSET_SENT], sendLen);
        // Check to see if there are more APDU's to send
        if (chain) {
            offset[OFFSET_SENT] += sendLen; // count the bytes sent
            ISOException.throwIt(ISO7816.SW_BYTES_REMAINING_00); // indicate there are more bytes to come
        } else {
            offset[OFFSET_SENT] = 0; // no more bytes to send
}

One Time Use Coupon

Hi All,
Is there a way to create a coupon on ATG 10.0.3 to be used just 1 time?
We want to create like 200 Coupons that will be unique, and we do not want those to be used more than one time.
Is this possible?
If so, Could you please help me to configure one?
Because I tried all options that I know in BCC without success.
Regards.
Obed

I read your email again,
And I do not see that option, I just see the options in the image below:
http://oi40.tinypic.com/2dbkkg6.jpg
Perhaps I am missing some configuration or that is not part of ATG10.0.3
Regards,
Obed

Just one time use?

Similar Messages

Maybe you are looking for