Just out of curiosity....

So just out of curiosity, I was wondering if it was possible to increase the screen resolution on a 20" screen beyond 1680 x 1050. Anyone know?

No, that would not be possible, because the maximum resolution on an LCD screen is constrained by the fixed size of the pixels. You can't make the pixels smaller.

Similar Messages

What would happen if you put iOS 7 on an iPod 4th generation? Just out of curiosity.

What would happen if you put iOS 7 on an iPod 4th generation? Just out of curiosity.

It will not install you will get an error message if you try to force an install.
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

I smashed my iPhone and was wondering how much for a new one as it is now unusable. On a 2 year plan with telstra and just out of the 1 year mark. Please help me. Thanks

Need help with how much a new iphone will be.
I smashed my first one yesterday and is now unusable. Im currently on a 2 year contract plan with Telstra and just out of the 1 year mark.
i dont know what to do next.. Please help.
Thankyou

Hi tiarnafromnsw,
If you have a damaged iPhone, you may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=Australia&product=iphone
Regards,
- Brenden

I am selling my 2006 Mac Pro. How do I reset everything so it is like it is just out of the box? Eliminate passwords and such?

Hello Everyone. I am selling my 2006 Mac Pro. How do I reset it so that the passwords are removed and settings are as if it is just out of the box. Thank you for your help.

Re: i want to bring my mac to the way i bought it how do i do that

My iPod classic accidentally went through the washer. I put it in rice and now it will turn on but it just shows a red X. Am I just out of luck?

My iPod classic accidentally went through the washer. I put it in rice for about two weeks. It will now turn on but only shows me a red X. I plugged it into the wall but I am afraid to plug it into my computer. I don't know if that will have an adverse affects on my computer. Am I just out of luck on this one or is there any way this is salvageable?

Rice is a weak drying agent. You can buy stronger desiccant's that will do a better job of drying out the iPod. But please use caution, these desiccant's can be poisonous, so use caution.
Considering the very high value of an iPod classic I would make every attempt to repair it. One example is shown below, but there are many types available.
http://www.amazon.com/Gram-Silica-Packets-Desiccant-Dehumidifiers/dp/B00DYKTS9C/ ref=sr_1_1?ie=UTF8&qid=1428106971&sr=8-1&keywords=desiccant

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be?

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be? Any ideas?

Brock8821-
Use iTunes on your computer. With the iPad connected, sign into your Apple account and check for updates.
Doing this should straighten out the problem.
Fred

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

Just out-of-box Q2613x won't work in HPLJ 1300

I've had a Q2613X sitting in the box for a while (got a good deal from a business that was getting rid of excess cartridges). It was still sealed in the black plastic bag. Recently my in-use Q2613A ran out of toner, and I put in the 13X. The orange light blinks with the 13X. If I put the 13A back in, the light goes green, but there's no toner, so... Is there anything I can do to get the 13X to function? I've tried unplugging and rebooting (holding Go button while powering up) the printer, but the end result is the same. When I turn the 1300 back on, the motor spins, the lights go through their rotation, but end up on flashing orange, and it doesn't work. (And just to repeat, putting the old 13A in gets me back to green light status, so I don't think this is a printer issue.)
Is there something perhaps going on with the chip on the 13X cartridge? What can I try to get my use out of this "new" toner cartridge?
Thanks.

Hi RogersHSV,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet 1300 is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to log into the commercial forum > HP Enterprise Business Community
You may find the HP LaserJet 1300 Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Notifications is not working for me. Just out of the blue it stopped working Friday afternoon

Notifications just stopped working the other day. I cannot figure out why or how to get it started.

Backup and then restore as new and see if it works or not.

Hi, are other people still experiencing chipped scuffed iphone 5 brand new just out of box?

Im an old apple user who likes keeping all his devices up to date. I ordered and iPhone 5 white and unfortunately it was chipped from 3 different places right out of the box. Now come my replacement white iphone 5 which is supposed to be fine. It has barely been a few hours i took it out of the box and there is a small chip on the screen. Note: chips on the first phone were on the aluminium frame where the screen seem is. Im writing this review just disappointed in my trust for the company thinking i will let it slide and keep using my chipped phone till a better android phone comes in and this one breaks properly. Any other people having this issue? I know getting two defective devices is beyond bad luck. I have pictures of the damages along with the imei if anybody wants to see?

iharoon wrote:
Im writing this review just disappointed in my trust for the company thinking i will let it slide and keep using my chipped phone till a better android phone comes in and this one breaks properly.
This is not a site for reviews, there are dozens of such sites out there... if you want to right a review (you have not do so yet), go there and write one.
iharoon wrote:
Any other people having this issue?
Does it matter? Will that make your issue go away or make you feel better?
Take the device to an Apple store and exchange it or contact Apple Customer support to arrnage an exchange.
iharoon wrote:
I have pictures of the damages along with the imei if anybody wants to see?
We're all users like yourself and frankly I doubt anyone here really cares. Even if they did, all they can do is empathize with you.

Just my own curiosity on Legal Consolidation

Hi Everyone,
Iu2019m curious and hope to see some good feedback here.
How many people actually know and have experience performing legal consolidation with BPC.
Anyone in America?
Anyone with BPC 7, Microsoft or Netweaver?
Thanks for your feedback, I'm sure many other are curious about this.
Fletch

At the outset, let me say that we did not have to do Intercompany profit elimination on this project. But my BPC mentor had a few suggestions.
The scenario is company A produces 100 units of Product X for $100 ($1 per Product X - Cost of Sales) and sells it to Company B for $200 with mark up price ($2 per Product X u2013 Sales). Now Company A has sales of $200 while Company B has COS of $200 which will be easily eliminated by intercompany elimination. But now Company B has $200 worth of Inventory (Assets) when it should be actually only $100 thus inflating the assets. Is there a business rule to eliminate inventory/asset of this kind?
If certain assumptions can be made, you could eliminate the 'imbalance' of COS and sales to the inventory account.
Also now if Company B sells 80 units of Product X, 50 of which are from the ones supplied by Company A while the remaining 30 are bought from somewhere else. So now company B is left with 50 units of Product X (that was bought from Company A) valued at $100 (when its actually $50). How do we evaluate inventory in this case (remember there might be hundreds of such transactions happening in the company, multiple products being bought from multiple inter-companies at different prices)? How do we eliminate the Inventory profit because of stock transfer? How do we track all these stock movements?
In cases such as the above, I would rely heavily on using movement types to track stock transfers. You then have the option of using formulas. An alternative would be to (a) store the profitablilty of the products in the system, (b) pull down the requisite movement types into an excel template within BPC, (c) let excel calculate the appropriate profit to be eliminated (d) send these profit figures to the system to actually perform the elimination.
The above are just different ways of thinking about/tackling the issue. You would have to test it out!
All the best
Tara

My flash and back camera is not working it just out of the blue stopped working I reset everything and it still does not work what should I do it's an iPhone 5c

MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c

Backup and then restore as new and see if it works or not.

HT4623 There is no room on my iPhone 4 8 GB to install software update. So I am just **** out of luck, right?

How am I supposed to correct Apple's failure to protect my information by not offering a solution to the SSL issue on my iPhone 4 8GB.

Why on Earth would you be out of luck? just remove music movies photos apps to free up space

Out of curiosity: Will Activation Lock still work after an iPhone auto-erases on the 10th failed passcode attempt?

Believe me, I'm no chicken when it comes to security. Using a combination of a strong alphanumeric passcode laced with non-Latin homoglyphs, Activation Lock (which Find My iPhone automatically enables), a disabled Siri when the phone is locked, a disabled Control Center when the phone is locked (both of those are security risks due to Airplane Mode), and Data Protection (erase phone after 10 failed passcode attempts), there's no doubt someone other than me is going to have a real hard time trying to use my device...
... Or so it seems. I've been digging through the Apple support articles to find out what exactly Activation Lock does, and I noticed that if someone goes into Settings -> General -> Reset -> Erase All Content and Settings and erases the device in a seemingly authorized manner, Activation Lock gets disabled with it. However, if someone else tries to erase it, or if it's erased remotely, then it will still display the Activation Lock message and require login with the username and passcode used to log in initially. Here's the real issue, though: Not one of those articles mentions what happens when you have Data Protection enabled and Data Protection happens to get set off by a thief attempting to brute force one's passcode, and how nicely Activation Lock plays with it. Does anyone else have that information, just in case?

While I have yet to confirm this with Apple, my understanding is that the auto-erase wil leave the Activation Lock intact. AL wouldn't be of much use if a thief could get around it by just entering in the wrong passcode multiple times. You'll forgive me though, I trust, if I don't try to test this with my own device.
Regards.

Want to cut frames just out of mp4 source files (gopro) and save back to mp4 files without changing format ot stuff like this - how to? Thx

Hi,
get freaky - I only want to reduce unpopular film sequences out of some gopro mp4 files and save them back in the same format. Just mp4 to mp4? Has anyone a warm idea. Thank you.

thomase
If you want a H.264.mp4 1280 x 720 @ 29.97 progressive frames per second export as the match for your source video with those properties, then you use
Publish+Share
Computer
AVCHD
with Presets = Vimeo HD which will give you 1280 x 720 @ 29.97 progressive frames per second.
or
Publish+Share
Computer
AVCHD
with Presets = MP4 HD720p24 and the hit the Advanced Button/then Video Tab to customize the preset to MP4 HD720p29.97.
After you hit the Advanced Tab/and the Video Tab and put in your settings, the Advanced Export setting should look like
Note: Click on the Chain link in the box to the right of Frame Width and Frame Height so that you can type in your 1280 and 720.
Do not hit Match Source. Put the values in yourself.
One of the major factors that we need in all this is the bitrate value of the original. We want to make sure that the bitrate of original
and export as the same or with the bitrate of the export being higher than the original. More on that later.
Please let me know if you are following me in the details so far. If not, please do not hesitate to tell me where you need clarfication.
Thanks.
ATR

Just out of curiosity....

Similar Messages

Maybe you are looking for