Just purchased a used G4 and need some help

First, let me say, that I am finally returning to the fold after years of working on a PC (employers insisted) but have just purchased a used G4 running OS 10.3.8 I've registered the G4 and everything, and tried to update the OS. I got a "mounting failed" message. It may be because the previous owner left a password in the automatic update file and didn't tell me what it was. Also, they did not provide me with the original installation discs so I could use administrator access to disable this password! Anyway, I want to update the OS as far as it can go - any idea how I can do this? I've searched around the apple site for a while now, seeing if I could purchase replacement installation discs, but can't find any into. If I just go ahead and purchase the 10.4 upgrade, can I install it without upgrading from 10.3.8?
Sorry if these are basic questions, but my last mac was an Apple IIc be kind.

Hello nebpen,
"While the lamp hold out to burn, the vilest sinner may return!"
Welcome back!
As the Texas Mac Man says, you need the install CDs (and Applerescue is a good source). Your DA will run any Apple OS out there at its latest update. I happen to prefer Panther, mostly, I suppose, because it's simpler ... or run them both!
Further, IMHO, the DA is the sweet spot in balancing cost and performance. I'm still feeling my way with upgrades, but every day mine seems to run better. I've just discovered how to adapt an 867mhz QS cpu, so the backup is now running faster than the Main Mac, and I even had to install Tiger (10.4.10) to take advantage of the latest Google Earth. What incredible pictures!
Anyhow, welcome!
Jon

Similar Messages

Just purchased a used iMac and need to wipe it clean.

I just purchased a 2011 24" iMac used. The previous owner did not remove anything. I would like to wipe it clean before I run Time Machine from an external drive to load my programs, data etc. What is the best way to wipe clean (completely clean) the iMac. Also, would I be better off loading all of the programs from the original CD's rather than Time Machine? I don't know if I could have picked up "stuff" over the years that I don't want brought to this newer machine.
Also, I would like to upgrade to the latest OS Lion. Should I do this first or after the wipe?
Thanks!

Did your iMac come with Lion (10.7) installed or did the seller buy that at the app store?
If the seller purchased it, then you will need the original install DVDs (Snow Leopard), either from the seller or by calling Apple and giving them your serial number. The reason: the license for any OS or app obtained at the app store is not transferable - the seller is obligated to wipe the drive and reinstall the original system. The OS is tied to the Apple ID of the purchaser forever and you will never be able to reinstall.
If it turns out yours came with Lion, the seller was supposed to call Apple and make a transfer of the OS to you.
So, the first thing to do is to figure out which OS version it came with and, if you have the install disks (Snow Leopard), then use them to wipe the drive and reinstall the original system. After that, you can purchase Lion (or Mountain Lion) at the app store using your own Apple ID.

I must be clueless...just purchased quicktime pro...need some help

so I just purchased quicktime pro...I purchased it on my work computer, because I was bored...and figured I would take the code home, and put it on my mac book. I didn't put the code or key on my work computer at all.
I guess my question is do I need the internet to activate my quick time pro at home? because I don't have the internet at home. I know I know...everyone does.
I did go to a coffee shop where they have wireless and I put the numbers in (on my mac book), and it didn't do anything...it just highlighted the code, and that is it. does it install anywhere that I can physically see? or does it just turn on the quicktime pro features?

I'm thinking I put the code in my mac book, and figured I needed to see something visual installing and didn't realize that it just turns it on.
Actually, there are a number of indicators. If you open the "Register" tab in "QuickTime Preferences...", you should see that your registration number remains as entered. (Should have been erased if your entries are rejected.) In addition, it should now say "QuickTime Pro 7" below your registration number. If you open the "About QuickTime Player" menu option, the QT blue "Q" should now have the word "Pro" superimposed on it. Lastly, all of the menu options that were previously grayed/covered by the word "Pro" are now working.

Used iphone and need some help, please

i got a used iphone and im tryin to set it up, but the screen isnt turning on, i mean there is little light but cant see anything. what do i do ?

bring it back. Sounds like it's broken, doesn't it?

I have just purchased a new macbook and need to sync my iphone with itunes, i understand that you can only sync your phone with one itunes account. I do not want to wipe my iphone when syncing with this new itunes account. Any advice welcome

I have just purchased a new macbook and need to sync my iphone with itunes, i understand that you can only sync your phone with one itunes account. I do not want to wipe my iphone when syncing with this new itunes account. Any advice welcome

1) authorize iTunes on the new machine for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.

I just purchased a PC laptop and need to activate Lightroom 5 on it. How do I get my copy of LR5 deactivated from my old laptop so I can activate it on my new one?

I just purchased a PC laptop and need to activate Lightroom 5 on it. How do I get my copy of LR5 deactivated from my old laptop so I can activate it on my new one?

There is no activation mechanism in Lightroom. Hence no Help > Deactivate.
Only need to uninstall. Or leave it installed since the license allows two installations.

I have just purchased a used 3gs and the previous owner hadnt reset it.

I have just purchased a used 3gs and the previous owner hadnt reset it.
So i did the reset and left it over night as this can take a few hours.
This morning 10 hours later there is stillthe cirlcle going round in the centre of the screen.
There is no sim card in the phone.
What do i do now? please help?

To make this phone truly yours, do a Restore as New...
See this Support Article on Restoring your phone...
http://support.apple.com/kb/HT1414

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit content without actually downloading the explicit songs?

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?

See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks?

We just purchased a new computer and need to set up Itunes on it for the 3 members of our family. What is the best way to go about that?

We have just purchased a new home computer and need to set up I-Tunes for everyone in our family. Is that possible to do on one computer?

To have EVERYTHING as it is Now...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

I just purchased Photoshop Lightroom 5 and need to enter my redemption code. Where do I find the link?

I just purchased Photoshop Lightroom5 and need to enter my redemption code. Where do I find it?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

I'm new wiith Blackberry and need some help

Hi There,
I'm working on a school in the netherlands and thay are thinking here to give some people a blackberry phone to syncronize there calendar and mail. We are using a Microsoft Exchange 2007 server (with webacces active) for the calendar and mail and so on.
On colleauge now has a Blackberry 8520 and wants to syncronize his exchange account with the blackberry. We tried it and when setting up the mail we did chose "using webmail" and the mail works. However the calendar and contacts don't work.
Is it possible to syncronize a Blackberry with a exchange account (mail, calendar and contacts) without having a blackberry server? When it is possible, how do we have to o it?
Thanks,
Marcel

Hi and Welcome to the Forums!
The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm a newb to OS9 and need some help

Hey everyone, I just picked up a wallstreet powerbook, and i put a 30GB HD in it, i read about the 8GB boot limit, and partitioned accordingly, but now when i put the install disk in, i can't install itunes! It opens up with stuffit, and says "The Disk with your preffered destination folder is currently locked" Error-44, then i hit ok, but after that i have no idea what to do! Should i install apps on the System Disk (I have a System Disk and a Storage Partition) and just have all the docs (music and what not) 0n the storage? I'm prolly just gonna xpostfacto it soon and put panther on it, but i kinda like OS9, so can someone help me?

Hi, ze -
"The Disk with your preffered destination folder is currently locked"
That message, or one similar to it, is usually returned when the destination disk for the installer is set as a CD. Since a CD can not be written to, it is treated by the OS as if it were a locked volume.
You will need to select a volume on a hard drive as the destination. I suspect that the iTunes installer will need to install a few items in the OS 9 System Folder, so a good choice for a destination would be the volume you have installed OS 9 onto.

I'm new here and need some help or should I say guidance.

Hey Forum peeps,
I have a treo 700wx working on Sprints network and running on windows mobile version5. I am a BIG game freak and am looking to download a playable version of Maniac Mansion (any version) and I dont know how to go about doing this. I have read it is a playable game but I am NO techie and need to be walked through step by step so hopefully someone out there will remember what it was like to first start out and give me a helping hand.
Post relates to: Treo 700wx (Sprint)

Hi.. Welcome to the Palm forums. This process is used to install any 3rd party program onto your 700wx. First connect the usb cable and sync. Now on your computer go on the web and find you program/game you are looking for that is in a windows mobile 5 format, compatable with wm5 and download it to your computer. It will be a compressed file in a .zip format most likely. Go to where you saved the file and right click on it and select extract here. Once extracted you should have a setup file which you run to install the program. Follow that process and it will realize it is a windows mobile file and install it accross the cable to the 700wx. When it is finished on the computer it will tell you to check the 700wx for further instructions. At that point check the screen on the device and follow the directions. The key is to download a file that is windows mobile compatable, if you download a palm os format file or other mobile operating system file it will not install. Hope that helps.
Post relates to: Centro (Sprint)

Chain step is being skipped and need some help with why?

Hi, all.
I'm hoping for some help from the community again.
There's a chain created (code below) and it's running successfully -- at least it's building MOST tables.
The problem is: the last three tables are all dependent on the same condition and only two of them run.
From the code below, step 4, step 5 and step 6 are all dependent on the success of step 3.
When the job for this chain is run, all the steps run successfully except for step 5.
The interesting thing (to me at least) is that whichever table build is step 5 fails. For example, in the code below prog_Y is assigned to step 5 and it fails. If I swap prog_Y to step_4 and prog_X to step_5, step_5 still fails. Same result if prog_Z is listed as step 5. While steps 4 and 6 run successfully.
The additional info in job run details lists: table or view does not exist. However, I've confirmed the procs behind the programs each run successfully and the tables do exist.
I've tried several things to get more info: changing the step numbers.dropping/redefining step, dropping chain and redefining, retyping the steps and rules.
Please help. Any suggestions of why this step 5 might be failing or where to look for more information is super helpful.
Thanks so much
Fritz
When the chain is run partially
/* 1. Create Chain */
BEGIN
dbms_scheduler.create_chain (
CHAIN_NAME => 'dgr_cmpl_chain',
RULE_SET_NAME => null,
EVALUATION_INTERVAL => null,
comments => 'Chain which loads the degree completion tables.');
END;
/* 2. Define the steps in the chain */
BEGIN
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_1',
   program_name    => 'prog_intrmdt_1');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_2',
   program_name    => 'prog_intrmdt_2');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_3',
   program_name    => 'prog_base');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_4',
   program_name    => 'prog_X');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_5',
   program_name    => 'prog_Y');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
   chain_name      => 'dgr_cmpl_chain',
   step_name       => 'step_6',
   program_name    => 'prog_Z');
END;
/* 3. Add rules */
BEGIN
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'TRUE',
   action       =>   'START step_1',
   rule_name    =>   'rule_1',
   comments     =>   'Start Degree Completion chain.');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_1 succeeded',
   action       =>   'START step_2',
   rule_name    =>   'rule_2');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_2 succeeded',
   action       =>   'START step_3',
   rule_name    =>   'rule_3');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_3 succeeded',
   action       =>   'START step_4',
   rule_name    =>   'rule_4');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_3 succeeded',
   action       =>   'START step_5',
   rule_name    =>   'rule_5');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_3 succeeded',
   action       =>   'START step_6',
   rule_name    =>   'rule_6');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
   chain_name   =>   'dgr_cmpl_chain',
   condition    =>   'step_4 completed and step_5 completed and step_6 completed',
   action       =>   'END',
   rule_name    =>   'rule_7');
END;
/* 4. Enable the chain */
BEGIN
DBMS_SCHEDULER.ENABLE ('dgr_cmpl_chain');
END;
/* 5. Create a job that points to the chain. */
/*Utilized Job wizard to create job */

Thanks much for your suggestions. Very grateful.
Looks like this may have been a self-inflicted error.
There were some other errors that confound this explanation. But right now this seems to be the most likely case.
The END condition initially was step 6 completed. Turns out, when step 3 succeeded, all steps 4, 5 and 6 were kicked off simultaneously. Well, step 6 had a shorter run time than step 5. So step 6 would finish and trigger the end of the chain before step 5 finished.
This has been consistently working since the END condition was updated to evaluate steps, 4, 5 and 6.
Fritz

I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Just purchased a used G4 and need some help

Similar Messages

Maybe you are looking for