Just purchased extreme card and have problems

Hi all,
I have two computers, one a MBP and one an old iMac (17" flatpanel), I love connecting to the net on my MBP using the built in Airport, so I decided to get one for my old iMac. I have just installed it and it doesn't seem as straightforward as on MBP, it just doesn't seem to detect a connection, I have even tried manually copying the DHCP settings from my MBP, without any joy, is there something I am missing. Do I need to first connect the iMac via ethernet to the modem?
Any help would be appreciated.
Thanks

The antenna connection to an AirPort Extreme card can trick you into thinking it is installed properly. Use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is indeed installed correctly.

Similar Messages

TS1292 I just purchase this card two hours ago on my visa debit card and I am receiving a invalid nonactivate message. What do I do. I always purchase iTunes cards and have never experience this before.

I just purchase this card two hours ago on my visa debit card and I am receiving a invalid nonactivate message. What do I do. I always purchase iTunes cards and have never experience this before.

Are you able to go back to where you bought it from and see if they can activate it properly ? If not then you can try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and probably of the receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

I've just purchased an ipad2 and have synced it with outlook to get all contacts. I've also set up my earthlink mail account and it sends/receives fine. IS there a way to sync it so I get all of the legacy emails sitting in the OUtlook inbox?

I've just purchased an ipad2 and have synced it with Outlook to get all contacts, etc. I've set up the mail account and it is working just fine. The sync doesn't pull over legacy emails from Outlook and my Outlook has been set up to remove them from the webmail server therefore they aren't available from webmail anymore. Is there anyway to pull them over to the iPad?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

I just purchased the SX60 and have been trying to find the way to change the "startup image".

I just purchased the SX60 and have been trying to find the way to change the "startup image". I have the SX40, Sx30 SX1 and all allow me to change the startup image and the sounds through MyCamera. When I opened MyCamera, it tells me that it won't work on my model. Does anyone know how to change the startup image? In the menu it gives me the choice to either have it on or off. Thanks so much!

Looks like Canon has changed what they ship with the newer cameras. My SX50 came with a disc & no paper manual. Because of that I searched the Canon site (USA site) & found the program set you need to download (according to what it says). Now there are different versions based on your operating system so for my search I've chosen Win 8.0 & the program file recommended is
File Description Date Size
Digital Camera Software 4.3 [Windows]
09/16/14
22.26 MB
File Name: dcsw-4-3-0-2-9l.zi
"A skill is developed through constant practice with a passion to improve, not bought."

There software for net gear PS121 usIsb print server? Just purchased Macbook pro and have Netgear wireless printer router

Is there software download for net gear PS121 usb print server? Just purchased Macbook pro and have Netgear wireless printer router that has worked well for years on windowns. I have searched with minimal results

Check with NetGear for Mac OS X Lion driver/software.

HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers!

Have just purchased iPad Air and have downloaded my apps onto it. When I access Candy Crush I'm back at level 1, how can I get to the level I was on my old iPad?

Have just purchased an iPad Air and have downloaded my apps onto it. When I access Candy Crush I'm back at level 1, how can I get it back to the level I was at on my old iPad without starting from the start again?

Transferring from old to new
http://support.apple.com/kb/HT2109

Just purchased Wndows Vista and having problems with the port for Palm 125

I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop. I get an error message saying: "Com1 not available" What do I do?
Thanks,
Frustrated
Post relates to: Palm m125
This question was solved.
View Solution.

Sorry, that didn't work. I get no drop down menu from the Hot Sync Manager for the Serial Port. What comes up often is: "The selected port, COM1, is not available at this time. Hot Sync Manager will open the port when it becomes available."
Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port? Just a thought. Thanks for your help.
Post relates to: Palm m125

Help. Just purchased iphone 5 and have spent all evening trying to connect to my home wifi. No luck. Any ideas??

OK. Please someone has to have figured this out by now? I can't do anything with this very expensive paperweight. It won't let me access my wifi, and since i have AT&T, I might as well not have any phone service at all. HELP!!!

If you hate it so much, I suggest you sell it and buy something you like.
iOS: Troubleshooting Wi-Fi networks and connections

Setting up airport extreme card and airport extreme base station

I have an ibook G4 about 3 years old with osx10.4.10 recently installed. I have recently bought an airport extreme card and have also bought an airport extreme base station.
There seems to be a problem with the set up of the card. It does not seem to find any wireless networks at all, including the base station. The base station seems to be working as I went through setting this up with Apple phone support and we managed to do it by connecting the laptop to the base station with an ethernet cable.
I think the problem is with the card. I think I need to reinstall and set up the card again from scratch, but can't figure out how to do this -aiport utility and airport setup assistant don't seem to help here as they take you straight to the stage of setting up a base station. I seem to remember when I originally installed the card for the very first time (before attempting to set up the base station) that it did find other wireless networks, so I don't think there is a physical problem with the card.
Any suggestions on getting the card working appreciated.
Many thanks

Hello bblairlondon. Welcome to the Apple Discussions!
First, verify if OS X "recognizes" the card, by using the System Profiler utility. Select the AirPort Card option under Network in the column on the left. The "Wireless Card Type" should be "AirPort Extreme (nxnnnn, nxnnnn)."
If no card appears, I suggest that you double-check your AirPort Extreme Card installation by using the following Apple Tech article: iBook G4: CIP Instructions
If the card does appear, then try the following ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

TS1702 Hi, I'm experiencing a problem with app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on thi

Hi, My name is Bheki Yende
I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
Thanks

This is a user forum, you are not speaking to Apple here.
You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours.

HT4557 Hi, we have just purchased Apple TV and having some problems connecting to the iPad. It is asking us to 'connect to Home Sharing in iTunes' however I can't find the link/ button to press. iPad has been updated. Any help please

Hi,
We have just purchased Apple TV and can't connect to Home Sharing. We have wifi, the iPad is updated. I can't find the link on ITunes on the iPad that the tv is telling me to click. I've also tried turning it on via settings then music which seems to be connected. I can view YouTube clicks on the tv, but not an app so I can watch the footy. What am I doing wrong.
Any help would be greatly appreciated,
Thanks

Make sure your Apple TV is on the same network as your iPad. The SSID and password of router must be set in your Apple TV.
http://i1224.photobucket.com/albums/ee374/Diavonex/491f4b34c45018abef609c832b0f2 56a_zps0d1c18e7.jpg
Message was edited by: Diavonex

I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite). When i try to Save or Save As a file I get the following message: Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or

I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite). When i try to Save or Save As a file I get the following message: Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or another program is using the file. Use the Get Info command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder. Any suggestions? Thanks.

Photoshop: Basic Troubleshooting steps to fix most issues
Look under Troubleshoot User Permissions.
Gene

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Just purchased audio books they have not appeared in muy library as being downloaded and my 'nan' will not synchronise. never happened before.

Hi, I have just purchased audio books and none have been downloaded, or show as if they have been downloaded to my account. I plugged in my Nano and it didnt synchrose as it usually does. Anyone know why or what I could do to rectify the problem. Jodie 13

So the audiobooks do not appear under the Books (that appears in the left hand pane) category of iTunes?
B-rock

Just purchased extreme card and have problems

Similar Messages

Maybe you are looking for