Just purchased Final cut Studio, but DVD drive wont boot the install disk

I really need some help. I have an older G5 2.0 with 6 gigs of ram, and about 500mb of hardrive. Im running OS X 10.4.9. I just purchased FCStudio HD, but cant get the install disk to boot. My computer doesnt even read it. Am I doing something wrong? Is there some setting I should change?
G5 Mac OS X (10.4.9) My First Mac

I'm sure your drive size is a typo. You'll need a much larger drive if it's accurate.
Some install DVDs are unreadable and must be replaced.
But some older G4s and G5s had optical drives that could not play some newer DVDs. I can't tell you much more than that, I don't recall the details and the topic hasn't come up for many months. Try searching the forum?
Hope you're going to NAB, take some of the FCP classes.
bogiesan

Similar Messages

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

It's also under the File menu.

I just purchased Final Cut Pro from the App Store and it will not download to my computer. I try and install it from my purchases file but nothing happens. Any suggestions?

I just purchased Final Cut Pro from the App Store and it will not download to my computer. I try and install it from my purchases file but nothing happens. Any suggestions?

If it's in the purchased page and doesn't download, you should contact Apple.

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?

after using FCS remover run disc repair:
shut down the Mac
Hold the Shift key on keyboard and start up the Mac
The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
insert the FCS DVD in the drive and install FCS again.

I just bought Final Cut Studio, now Final Cut Pro X came out. Can I get a refund on Final Cut Studio now that it is obsolete?

I think this is so bad on Apple's part. I just bought Final Cut Studio, and now they release Final Cut Pro X. Apple keeps a veil of secrecy about the release of their products, but if I had known Final Cut Pro X would have integrated the main Final Cut Studio components I would have waited. How could anybody have predicted an App from the App Store would integrate 3 of the extensive components of Final Cut Studio? I am ticked off that I spent $1000 for FCS, and now Final Cut Pro X basically makes it obsolete! Is it possible that Apple will offer a refund for Final Cut Studio, since really they should not have been selling it so close to the release of Final Cut Pro X?

Thanks for the feedback everyone. I am more at peace of mind that there may be a market now that Final Cut Studio is off the shelves. Basically I bought Studio to ramp up my video making abilities from iMovie for promoting my son's adaptive skiing. Studio gave a lot of great functionality for me, but I also bought FCP X and it has most of what I need. I had thought that there was no way to have the rest of the Studio (Motion, Color, Soundtrack Pro) in FCP X unless you had the full Studio before hand. Some Apple folks thought similarly to me, which is why I dropped the grand on it. Now I found that Color and the Soundtrack piece are integrated into FCP X. I was baffled. I am still not clear on what I can do with the full Studio that I cannot do with FCP X? As with any new software release there are bugs at first. I am guessing that if I ride out the bugs much of the functionality from the Full Studio will be in FCP X (and Motion and Compressor Apps), thus making the Studio eventually obsolete, since the 64 bit and full use of my Quad Core Processor is definitely one step up, with some of the other step downs. I mean, check out what Conan's team has done!
http://teamcoco.com/video/conan-editors-love-final-cut

I just bought Final Cut Studio right before this new version...

I just bought Final Cut Studio right before this new version came out. Am I eligible for a free upgrade to the new software?

I'm sorry, but these replies have been ludicrous. To actually answer your question, I would think they would honour their usual 14-day return policy, but you would need to speak with Apple directly.
As to the whole "which is better" debacle, there is no doubt that Final Cut Pro 7 is the more polished and fleshed out piece of editing software, and what everyone is most familiar with to boot. But let's be honest, what do you expect for software that is ten years old versus three days. The fact of the matter is that pretty much everyone editing with Apple's software in the not so distant future is going to be editing on Final Cut Pro X, hands down. It's fundamentally that much better. You nay-sayers out there, if you don't switch to Adobe or Avid, you will go to FCP X! There is a reason for that, and there will be an even stronger reason for that with every update. People don't seem to understand that.
In your situation, if you don't own either, it makes a whole lot more sense to me for you to just roll with the hiccups FCP X brings if you can at all handle it. If not, you are going to spend $999 now on FCS 3 and another $400 in the near future when you decide to take the leap. Is there something worth $1000 to you in FCS 3 that FCP X doesn't offer? If so, then great, go ahead. It's an amazing piece of software. If not, enjoy the head start on what editing is going to look like for the next ten years.
All the best talking with Apple. The way that they are pushing FCP X I would hope you don't run into any trouble.
Justin

I just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

Ii just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

You should see it in your Purchases page of the App Store.

I just downloaded final cut pro but it didn't give me any way to pay. Where did it charge? In my apple ID?

I just downloaded final cut pro but it didn't give me any way to pay. Where did it charge? In my apple ID?

Do you have a credit card registered in your account? Do you have a large credit on your account from redeeming an iTunes gift card?

I tried to purchase final cut pro but it says to contact iTunes support

I tried to purchase final cut pro but it says to contact iTunes support

You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8?

Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8? If not, is there a work-around if I have to revisit work done in FCS 3?

I have it running on the latest NON-Retina MBP. And a good friend of mine has it running on his Retina model. Works fine.
Henry English wrote:
What if I have to revisit any one of them? What if I try FCP X and find I prefer FCS 3?
If you need to revisit them...that's why you install FCS3. That's really the only reason I have that on my system, to revisit old projects, and to deal with clients who still use FCP 7.
You really should look at moving on though...not sticking with FCP7. It's 4 years old...two years since it was EOL. Adobe Premiere Pro CC is a very good FCP replacement...although I don't like their "rental" method of paying a subscription to use it. Or you can buy Adobe CS6...but that just lacks enough to make it not quite tempting for me. Premiere CC is spot on...but **** if I don't hate that subscription model. But there's also Avid Media Composer. But that doesn't do a lot of things that I used FCP and Adobe for...

?I have Adobe Photoshop elements 12, my computer crashed and I purchased a notebook with no DVD drive, how do I install my product on my new computer?

?I have Adobe Photoshop elements 12, my computer crashed and I purchased a notebook with no DVD drive, how do I install my product on my new computer?

Download is for multiple languages, including English

How to undo boot camp, wont boot from install disk in dvd drive

A few months ago I went through trying out boot camp and parallels. Now, I think something is messed up. I dont need either right now, so I just want to wipe out the whole system, repartition the drive, and restore to a blank new install of os x 10.5 leopard.
But when I put in the install disk, it wont boot up off it.
I tried holding down the c key while powering it up, and it just cycles through: hearing the drive whirl, a bling sound, and then repeating it again while the screen is blank. Finally, I held down the click button on the touch pad so it would eject the install disk.
Maybe this will help someone recognize part of the problem. Ever since messing around with boot camp and parallels, my machine wont "reboot". To reboot it, I tell it to reboot, then it hangs on the star like screen, then I have to hold the power button down, then if I do nothing, it tries to boot, but ends up in a dos looking screen saying no bootable device. So when I power it back up, I hold down the alt key, and then I have one choice: the hard drive. I pick that and it boots up ok.
So... I thought, well, maybe the boot camp is still messed up; maybe I should undo boot camp. When I start the boot camp assistant, there is only a "partition" and "back" button; nothing to "restore" the hard drive to just one partition.
What can I do? I want to wipe the drive and install a fresh install from my install disk.

Forgot to specify:
Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
I just dont have the option to install windows 7 in any other form that a cd
a picture;

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

Please stop making multiple posts on the same subject.. This is the third thread you have created in a short space of time asking the same question.
Please read the answers given in this thread you posted...
https://discussions.apple.com/thread/5311324?tstart=0

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

Just purchased Final cut Studio, but DVD drive wont boot the install disk

Similar Messages

Maybe you are looking for